Advertisement

Improving the film-forming ability of BaTiO3/epoxy resin suspension by adjusting the solvent composition for the fabrication of embedded capacitance materials

  • Fengwei WangEmail author
  • Xu Zhou
  • Weikai Zheng
  • Gang Jian
  • Rui Liu
  • Hui Shao
Article
  • 1 Downloads

Abstract

Embedded capacitance materials (ECMs) are gradually taking the place of traditional discrete capacitors in the fabrication of high-end electronic devices. However, the exploration of suspensions with simple compositions and improved performance remains an important topic for the further development of ECMs. In this work, commonly used auxiliaries are not employed, and ethanol is added to a BaTiO3/epoxy resin ethyl acetate suspension, which improves the film-forming ability. The corresponding ECMs show increased mechanical and electrical performance due to the better dispersion of the BaTiO3 nanoparticles. The fabricated embedded capacitors have low tolerances and can pass reliability tests, which verifies their applicability in printed circuit board manufacturing.

Notes

Acknowledgements

This work is supported by the Natural Science Foundation of China (Grant No. 51807083), the Natural Science Foundation of Jiangsu Province (Grant No. BK20170585), Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).

References

  1. 1.
    Y.J. Xiao, W.Y. Wang, T. Lin, X.J. Chen, Y.T. Zhang, J.H. Yang, Y. Wang, Z.W. Zhou, J. Phys. Chem. C 120, 6344 (2016)CrossRefGoogle Scholar
  2. 2.
    L. Wang, Z.M. Dang, Appl. Phys. Lett. 87, 042903 (2005)CrossRefGoogle Scholar
  3. 3.
    X.H. Zhang, G.Z. Liang, J.F. Chang, A.J. Gu, L. Yuan, W. Zhang, Carbon 50, 4995 (2012)CrossRefGoogle Scholar
  4. 4.
    S.M. Wu, C.T. Kuo, P.Y. Lyu, Y.L. Shen, C.I. Chien, Prog. Electromagn. Res. 121, 365 (2011)CrossRefGoogle Scholar
  5. 5.
    H. Stahr, M. Beesley, in Proceedings of the SMTA International Conference (2011)Google Scholar
  6. 6.
    F.W. Wang, C.Q. Cui, J. Wang, J. Mater. Sci. Mater. Electron. 26, 9766 (2015)CrossRefGoogle Scholar
  7. 7.
    Y. Shen, Y. Lin, M. Li, C.W. Nan, Adv. Mater. 19, 1418 (2007)CrossRefGoogle Scholar
  8. 8.
    Y. Rao, S. Ogitani, P. Kohl, C.P. Wong, J. Appl. Polym. Sci. 83, 1084 (2002)CrossRefGoogle Scholar
  9. 9.
    M. Arjmand, S. Sadeghi, M. Khajehour, U. Sundararaj, J. Phys. Chem. 121, 169 (2017)Google Scholar
  10. 10.
    F.W. Wang, C.Q. Cui, S.T. Zhang, J. Wang, J. Adhes. Sci. Technol. 30, 1364 (2016)CrossRefGoogle Scholar
  11. 11.
    Z.M. Dang, S.H. Yao, H.P. Xu, Appl. Phys. Lett. 90, 012907 (2007)CrossRefGoogle Scholar
  12. 12.
    J.K. Yuan, S.H. Yao, Z.M. Dang, A. Sylvestre, M. Genestoux, J.B. Bai, J. Phys. Chem. C 115, 5515 (2011)CrossRefGoogle Scholar
  13. 13.
    Y. Rao, J. Yue, C.P. Wong, Act. Passiv. Electron. Compon. 25, 123 (2002)CrossRefGoogle Scholar
  14. 14.
    S. Ramesh, B.A. Shutzberg, C. Haung, J. Gao, E.P. Giannelis, IEEE Trans. Adv. Packag. 26, 17 (2003)CrossRefGoogle Scholar
  15. 15.
    G.S. Wang, ACS Appl. Mater. Interfaces 2, 1290 (2010)CrossRefGoogle Scholar
  16. 16.
    S.H. Yao, Z.M. Dang, M.J. Jiang, J.B. Bai, Appl. Phys. Lett. 93, 182905 (2008)CrossRefGoogle Scholar
  17. 17.
    W.H. Yang, S.H. Yu, R. Sun, R.X. Du, Ceram. Int. 38, 3553 (2012)CrossRefGoogle Scholar
  18. 18.
    W.H. Yang, S.H. Yu, R. Sun, R.X. Du, Acta Mater. 59, 5593 (2011)CrossRefGoogle Scholar
  19. 19.
    Z.M. Dang, L. Wang, Y. Yin, Q.Q. Lei, Adv. Mater. 19, 852 (2007)CrossRefGoogle Scholar
  20. 20.
    B. Wang, L. Liu, L. Huang, L. Chi, G. Liang, L. Yuan, A. Gu, Carbon 85, 28 (2015)CrossRefGoogle Scholar
  21. 21.
    A. Ameli, S. Wang, Y. Kazemi, C.B. Park, P.A. Potschke, Nano Energy 15, 54 (2015)CrossRefGoogle Scholar
  22. 22.
    P.H. Hu, Y. Shen, Y.H. Guan, X.H. Zhang, Y.H. Lin, Q.M. Zhang, C.W. Nan, Adv. Funct. Mater. 24, 3172 (2014)CrossRefGoogle Scholar
  23. 23.
    W.K. Zheng, H. Chen, X. Zhou, R. Liu, G. Jian, H. Shao, F.W. Wang, J. Mater. Sci. Mater. Electron. 29, 17939 (2018)CrossRefGoogle Scholar
  24. 24.
    Y.J. Li, M. Xu, J.Q. Feng, Appl. Phys. Lett. 89, 072902 (2006)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Materials Science and TechnologyJiangsu University of Science and TechnologyZhenjiangChina

Personalised recommendations