Advertisement

Journal of Materials Science: Materials in Electronics

, Volume 29, Issue 17, pp 15147–15155 | Cite as

The electrical properties enhance of BEP laminate employing HBP blocking by hexanoic acid

  • Zilong Wang
  • Xiaorui Zhang
  • Ling Weng
  • Lizhu Liu
Article

Abstract

A laminate aimed to be used in high frequency CCL is prepared by introducing free volume into employing adding HBP blocking by hexanoic acid (HBP-C6). The effects of HBP-C6 on the electrical properties is analyzed. The results indicated the permittivity (Dk) of laminated is 4.03 and the dielectric loss (Df) is 0.00018 at the frequency of 107 Hz, when the HBP-C6 content is 15 wt%. The breakdown strength of the laminate is 28.62 kV/mm, the volume resistivity of composites is 3.25 × 1014 Ω m, which shows a good insulation property. The mechanical, moisture absorption rate, peel strength and flame retardant results also give the application possibility on high frequency CCL.

References

  1. 1.
    C. Wang, N. Wen, G. Zhou, Appl. Surf. Sci. 422, 738–744 (2017)CrossRefGoogle Scholar
  2. 2.
    L.P. Laforte, L.L. Lebel, Polym. Test. 67, 205–212 (2018)CrossRefGoogle Scholar
  3. 3.
    H. Futian, Z.R. Yang, Acta Mater. Compos. Sin. 2, 38–41 (2008)Google Scholar
  4. 4.
    H Qi-bin, Z. Le, D. Renjie, Insul. Mater. 50, 30–34 (2017)Google Scholar
  5. 5.
    D. Zhuo, A. Gu, G. Liang, J. Mater. Sci. 46, 1571–1580 (2011)CrossRefGoogle Scholar
  6. 6.
    G. Rui, A. Gu, G.J. Liang, Appl. Polym. Sci. 121, 16759–1684 (2011)Google Scholar
  7. 7.
    M. Zhang, H. Yan, C. Liu, Polym. Compos. 36, 1840–1848 (2015)CrossRefGoogle Scholar
  8. 8.
    J.O. Simpson, A.K.S. Clair, Thin Solid Films 308–309, 480–485 (1997)CrossRefGoogle Scholar
  9. 9.
    C. Feng, M. Liang, J. Jiang, Thermochim. Acta 627–629, 83–90 (2016)CrossRefGoogle Scholar
  10. 10.
    Z. Zheng, Y. Liu, L. Zhang, J. Mater. Sci. 51, 5857–5871 (2016)CrossRefGoogle Scholar
  11. 11.
    W.M. Arden, Solid State Mater. Sci. 6, 371–377 (2002)CrossRefGoogle Scholar
  12. 12.
    C.J. Hawker, R. Lee, J.M. Frechet, J. Am. Chem. Soc. 12, 4583–4588 (1991)CrossRefGoogle Scholar
  13. 13.
    J.Y. Lv, Y. Meng, L.F. He, Appl. Mech. Mater. 262, 448–453 (2013)CrossRefGoogle Scholar
  14. 14.
    H. Treichel, G. Ruhl, P. Ansmann, Microelectron. Eng. 40, 1–19 (1998)CrossRefGoogle Scholar
  15. 15.
    G. Lee, B.K. Lai, C.J. Phatak, Appl. Phys. 114, 1321–5712 (2013)Google Scholar
  16. 16.
    A.K. Yadav, P.A. Jha, S. Murugavel, Solid State Ion. 296, 54–62 (2016)CrossRefGoogle Scholar
  17. 17.
    S.W. Martin, Appl. Phys. 49, 239 (1989)CrossRefGoogle Scholar
  18. 18.
    B. Roling, A. Happe, K. Funke, M.D. Ingram, Phys. Rev. 78, 2160 (1997)Google Scholar
  19. 19.
    J.Y. Li, P. Chen, Z.M. Ma, Mater. Sci. Eng. 25, 141–143 (2009)Google Scholar
  20. 20.
    Y. Reiming, W.L. Gong, Y. Huarong, J. Cent. South Univ. 44, 526–531 (2013)Google Scholar
  21. 21.
    J.K. Nelson, Nanotechnology 15, 586–595(2004)CrossRefGoogle Scholar
  22. 22.
    Y. Celikbag, S. Meadows, M. Barde, Ind. Eng. Chem. Res. 56, 9389–9400 (2017)CrossRefGoogle Scholar
  23. 23.
    E.A. Stroganova, V.F. Anufrienko, T.V. Larina, Russ. J. Phys. Chem. A 91, 1548–1556 (2017)CrossRefGoogle Scholar
  24. 24.
    S.M. Hubig, A. Rajendra Rathore, J.K. Kochi, J. Am. Chem. Soc. 121, 617–626 (1999)CrossRefGoogle Scholar
  25. 25.
    B.A. Rozenberg, Macromol. Symp. 10, 113–165 (1986)Google Scholar
  26. 26.
    D.E. Lee, H.W. Kim, B. Kong, J. Appl. Polym. Sci. 134, 45252 (2017)CrossRefGoogle Scholar
  27. 27.
    X. Zhang, Y. Zhang, Liao, J. Appl. Polym. Sci. 132, 32 (2015)Google Scholar
  28. 28.
    R.J. Messinger, T.G. Marks, S.S. Gleiman, Macromolecules 48, 4835–4849 (2015)CrossRefGoogle Scholar
  29. 29.
    Y.H. Yang, H.J. Sun, T.J. Peng, Acta Phys.-Chim. Sin. 27, 736–742 (2011)Google Scholar
  30. 30.
    C. Feng, Z. Yi, Z. Chi, Polym. Degrad. Stab. 97, 707–714 (2012)CrossRefGoogle Scholar
  31. 31.
    M. Zanetti, G. Camino, D. Canavese, Chem. Mater. 14, 189–193 (2002)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Polymer Materials, School of Materials Science and EngineeringHarbin University of Science and TechnologyHarbinPeople’s Republic of China
  2. 2.Department of Metal Materials, School of Materials Science and EngineeringHarbin University of Science and TechnologyHarbinPeople’s Republic of China
  3. 3.Key Laboratory of Engineering Dielectrics and Its Application, Ministry of EducationHarbin University of Science and TechnologyHarbinPeople’s Republic of China

Personalised recommendations