Advertisement

Investigation of electrical, dielectric and microwave properties of double substituted M-type Ba(1−2x)LaxNaxFe10Co0.5TiMn0.5O19 hexaferrite

  • Amit Arora
  • Sukhleen Bindra Narang
Article
  • 61 Downloads

Abstract

M-type Barium Hexaferrite Ba(1−2x)LaxNaxFe10Co0.5TiMn0.5O19 (x = 0.00–0.25 in steps of 0.05) samples have been synthesized by means of solid state reaction technique. The average crystallite size was depicted in 60.8–81.9 nm range from XRD analysis. High precision impedance analyzer was used in 10 kHz–1 MHz depicts an increase in AC conductivity and increase in dielectric parameters (ε′ and ε″) of the samples with an increase in the frequency of the applied signal as well as substitution amount (x). Vector Network Analyzer (VNA) measurement in X-band frequencies give the dielectric constant values in 5.5–7.1 and dielectric loss values in 0.01–1.2 range. The values of magnetic permeability and magnetic loss lies in 1.08–1.5 and 0.0–0.5 range respectively. The occurrence of peaks in reflection loss (RL) plots is observed at those frequencies where there exists an impedance matching between free space and sample material. The reflection loss of the sample Ba0.9La0.05Na0.05Fe10Co0.5TiMn0.5O19 is observed to be maximum amongst all the samples with a value of − 35.43 dB and − 10 dB bandwidth of 1.092 GHz. The large RL suggests that the composition Ba0.9La0.05Na0.05Fe10Co0.5TiMn0.5O19 could be a potential contender for microwave absorbing material.

References

  1. 1.
    R.S. Alam, M. Moradi, H. Nikmanesh, J. Ventura, M. Rostami, J. Magn. Magn. Mater. 402, 20 (2016)CrossRefGoogle Scholar
  2. 2.
    P.T. Phong, P.H. Nam, D.H. Manh, I.-J. Lee, J. Magn. Magn. Mater. 433, 76 (2017)CrossRefGoogle Scholar
  3. 3.
    A. Arora, S.B. Narang, J. Supercond. Nov. Magn. 29, 2881 (2016)CrossRefGoogle Scholar
  4. 4.
    E. Kiani, A.S.H. Rozatian, M.H. Yousefi, J. Supercond. Nov. Magn. 26, 733 (2013)CrossRefGoogle Scholar
  5. 5.
    A. Baykal, M. Demir, B. Unal, H. Sozeri, M.S. Toprak, J. Supercond. Nov. Magn. 29, 199 (2016)CrossRefGoogle Scholar
  6. 6.
    Y. Yang, F. Wang, J. Shao, X. Liu, S. Feng, J. Yang, J. Magn. Magn. Mater. 401, 1039 (2016)CrossRefGoogle Scholar
  7. 7.
    S.B. Narang, S.K. Chawla, R.K. Mudsainiyan, K. Pubby, Integr. Ferroelectr. 167, 98 (2015)CrossRefGoogle Scholar
  8. 8.
    Z. Wang, W. Yang, Z. Zhou, M. Jin, J. Xu, Y. Sui, J. Supercond. Nov. Magn. 29, 981 (2016)CrossRefGoogle Scholar
  9. 9.
    R.S. Alam, M. Moradi, M. Rostami, H. Nikmanesh, R. Moayedi, Y. Bai, J. Magn. Magn. Mater. 381, 1 (2015)CrossRefGoogle Scholar
  10. 10.
    I. Ahmad, G. Murtaza, S. Masood, M. Kanwal, G. Mustafa, M.N. Akhtar, H. Ullah, M. Ahmad, J. Mater. Sci. Mater. Electron. 27, 6193 (2016)CrossRefGoogle Scholar
  11. 11.
    A. Arora, S.B. Narang, J. Mater. Sci. Mater. Electron. 27, 10157 (2016)CrossRefGoogle Scholar
  12. 12.
    R.C. Pullar, Prog. Mater Sci. 57, 1191 (2012)CrossRefGoogle Scholar
  13. 13.
    A. Singh, S.Bindra Narang, R.K. Kotnala, J. Ceram. Process. Res. 11, 241 (2010)Google Scholar
  14. 14.
    X. Meng, X. Liu, C. Liu, C. Zhang, H. Li, K.M.U. Rehman, J. Mater. Sci. Mater. Electron. 28, 6352 (2017)CrossRefGoogle Scholar
  15. 15.
    S.B. Narang, I.S. Hudiara, J. Ceram. Process. Res. 7, 113 (2006)Google Scholar
  16. 16.
    H. Nikmanesh, M. Moradi, G.H. Bordbar, R. Shams Alam, J. Alloys Compd. 708, 99 (2017)CrossRefGoogle Scholar
  17. 17.
    M.N. Ashiq, R.B. Qureshi, M.A. Malana, M.F. Ehsan, J. Alloys Compd. 617, 437 (2014)CrossRefGoogle Scholar
  18. 18.
    H. Lou, X. Lu, Y. Pan, X. Wang, J. Wang, S. Sun, C. He, Q. Song, J. Mater. Sci. Mater. Electron. 27, 11231 (2016)CrossRefGoogle Scholar
  19. 19.
    R.D. Shannon, C.T. Prewitt, Acta Crystallogr. Sect. B 25, 925 (1969)CrossRefGoogle Scholar
  20. 20.
    I. Ali, M.U. Islam, M.S. Awan, M. Ahmad, J. Mater. Eng. Perform. 22, 2673 (2013)CrossRefGoogle Scholar
  21. 21.
    A. Ghasemi, A. Morisako, J. Magn. Magn. Mater. 320, 1167 (2008)CrossRefGoogle Scholar
  22. 22.
    S. Hussain, A. Maqsood, J. Alloys Compd. 466, 293 (2008)CrossRefGoogle Scholar
  23. 23.
    A. Maher Wahba, M. Bakr Mohamed, Ceram. Int. 40, 6127 (2014)CrossRefGoogle Scholar
  24. 24.
    A. Arora, S.B. Narang, J. Electron. Mater. (2018). ​ https://doi.org/10.1007/s11664-018-6349-8 Google Scholar
  25. 25.
    M. Javed Iqbal, M. Naeem Ashiq, I. Hussain Gul, J. Magn. Magn. Mater. 322, 1720 (2010)CrossRefGoogle Scholar
  26. 26.
    I. Sadiq, S. Naseem, M. Naeem Ashiq, M.A. Khan, S. Niaz, M.U. Rana, Prog. Nat. Sci. Mater. Int. 25, 419 (2015)CrossRefGoogle Scholar
  27. 27.
    A. Arora, S.B. Narang, Appl. Phys. A 123, 520 (2017)CrossRefGoogle Scholar
  28. 28.
    M.T. Sebastian, H. Jantunen, R. Ubic, Microwave Materials and Applications 2V Set (Wiley, Chichester, 2017)CrossRefGoogle Scholar
  29. 29.
    J. Chand, M. Singh, J. Alloys Compd. 486, 376 (2009)CrossRefGoogle Scholar
  30. 30.
    F. Guo, G. Ji, J. Xu, H. Zou, S. Gan, X. Xu, J. Magn. Magn. Mater. 324, 1209 (2012)CrossRefGoogle Scholar
  31. 31.
    M.M. Syazwan, R.S. Azis, M. Hashim, I. Ismayadi, S. Kanagesan, A.N. Hapishah, J. Aust. Ceram. Soc. 53, 465 (2017)CrossRefGoogle Scholar
  32. 32.
    A. Baykal, İS. Ünver, U. Topal, H. Sözeri, Ceram. Int. 43, 14023 (2017)CrossRefGoogle Scholar
  33. 33.
    A. Singh, S.B. Narang, K. Singh, P. Sharma, O.P.P. Pandey, S.B. Narang, K. Singh, P. Sharma, O.P.P. Pandey, Eur. Phys. J. Appl. Phys. 33, 189 (2006)CrossRefGoogle Scholar
  34. 34.
    I. Sadiq, S. Naseem, S. Riaz, S.S. Hussain, H.M. Khan, M.N. Ashiq, M. Rana, J. Alloys Compd. 715, 284 (2017)CrossRefGoogle Scholar
  35. 35.
    L. Jia, H. Zhang, Y. Liu, Z. Zhong, Q. Wen, J. Magn. Magn. Mater. 316, 67 (2007)CrossRefGoogle Scholar
  36. 36.
    S. Choopani, N. Keyhan, A. Ghasemi, A. Sharbati, R.S. Alam, Mater. Chem. Phys. 113, 717 (2009)CrossRefGoogle Scholar
  37. 37.
    S.M. Abbas, A.K. Dixit, R. Chatterjee, T.C. Goel, J. Magn. Magn. Mater. 309, 20 (2007)CrossRefGoogle Scholar
  38. 38.
    M.R. Meshram, N.K. Agrawal, B. Sinha, P.S. Misra, J. Magn. Magn. Mater. 271, 207 (2004)CrossRefGoogle Scholar
  39. 39.
    B. Ünal, İS. Ünver, H. Güngüneş, U. Topal, A. Baykal, H. Sözeri, Ceram. Int. 42, 17317 (2016)CrossRefGoogle Scholar
  40. 40.
    J. Singh, C. Singh, D. Kaur, S.B. Narang, R. Joshi, S.R. Mishra, R. Jotania, M. Ghimire, C.C. Chauhan, Mater. Des. 110, 749 (2016)CrossRefGoogle Scholar
  41. 41.
    S. Chen, G. Tan, X. Gu, Q. Man, F. Li, C. Chang, X. Wang, R.W. Li, J. Alloys Compd. 705, 309 (2017)CrossRefGoogle Scholar
  42. 42.
    N. Kumar, S.R. Vadera, in Aerospace Materials and Material Technologies, vol. 1, ed. by N. E. Prasad, R. J. H. Wanhill (Springer, Singapore, 2017), pp. 519–537CrossRefGoogle Scholar
  43. 43.
    Z. Peng, J.-Y. Hwang, M. Andriese, IEEE Trans. Magn. 49, 1163 (2013)CrossRefGoogle Scholar
  44. 44.
    I. Hajimiri, M.S. Seyed Dorraji, M.H. Rasoulifard, A.R. Amani-Ghadim, M.R. Khoshroo, Mater. Sci. Eng. B 225, 75 (2017)CrossRefGoogle Scholar
  45. 45.
    M. Cao, R. Qin, C. Qiu, J. Zhu, Mater. Des. 24, 391 (2003)CrossRefGoogle Scholar
  46. 46.
    J.W. Kim, S.S. Kim, Mater. Des. 31, 1547 (2010)CrossRefGoogle Scholar
  47. 47.
    S.B. Narang, K. Pubby, J. Supercond. Nov. Magn. 30, 511 (2017)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Electronics TechnologyGuru Nanak Dev UniversityAmritsarIndia
  2. 2.D.A.V. Institute of Engineering and TechnologyJalandharIndia

Personalised recommendations