Synthesis and characterization of borosilicate glass/β-spodumene/Al2O3 composites with low CTE value for LTCC applications
- 7 Downloads
Glass + ceramic composites based on low-softening-point borosilicate (BS) glass, β-spodumene and Al2O3 were produced in this work. The influence of ceramic filler composition on the microstructure, sintering quality, mechanical properties, thermal properties and dielectric properties of composites were studied. XRD and DSC indicated that both kinds of ceramic filler as well as the BS glass maintained their characteristics after sintering. The addition of β-spodumene would decrease the coefficient of thermal expansion (CTE) value of composites to match with silicon well. The better wetting behavior between β-spodumene and BS glass would lead to better sintering quality, microstructure and dielectric properties for composites containing more β-spodumene. With appropriate Al2O3 content, the flexural strength of composites could be enhanced. Composite with 45 wt% BS glass, 30 wt% β-spodumene and 25 wt% Al2O3 sintered at 875 °C showed good properties which meet the requirements of low temperature co-fired ceramic applications: dense microstructure with high relative density of 96.27%, proper CTE value of 3.57 ppm/°C, high flexural strength of 156 MPa, low dielectric constant of 6.20 and low dielectric loss of 1.9 × 10−3.
This work is partly supported by the Natural Science Foundation of Hunan Province of China (Grant No. 2018JJ3602).
- 1.X. Chen, W. Zhang, S. Bai, Y. Du, Densification and characterization of SiO2-B2O3-CaO-MgO glass/Al2O3 composites for LTCC application. Ceram. Int. 39(6), 8207–8212 (2013)Google Scholar
- 6.C.J. Dileep Kumar, T.K. Sowmya, E.K. Sunny, N. Raghu, N. Venkataramani, A.R. Kulkarni, Influence of nature of filler on densification of anorthite-based crystallizable glass + ceramic system for low temperature cofired ceramics application. J. Am. Ceram. Soc. 92(3), 595–600 (2009)CrossRefGoogle Scholar
- 16.R.D. Shannon, J.E. Dickinson, G.R. Rossman, Dielectric constants of crystalline and amorphous spodumene, anorthite and diopside and the oxide additivity rule. Phys. Chem. Miner. 19(3), 148–156 (1992)Google Scholar