Synthesis of nickel boride by thermal explosion in ball-milled powder mixtures

  • Michail A. Korchagin
  • Dina V. Dudina
  • Boris B. Bokhonov
  • Natalia V. Bulina
  • Arina V. Ukhina
  • Igor S. Batraev
Mechanochemical Synthesis
  • 29 Downloads

Abstract

In this work, a synthesis route of Ni3B, an attractive material for making heating elements and a promising component for catalysts, was developed using high-energy ball milling of nickel and boron powder mixtures. The milling duration was varied from 1 to 15 min. Ball milling led to partial dissolution of boron in the crystalline lattice of nickel and crystallite size refinement of nickel. Heating of the ball-milled mixtures at a constant rate led to thermal explosion, the indications of which were a rapid temperature rise and the formation of boride phases. The duration of ball milling was shown to influence the phase composition of the products of thermal explosion. The time of milling ensuring the formation of single-phase Ni3B was determined to be 7 min. The ignition temperature of thermal explosion decreased with the milling time: a decrease by more than 300 °C was observed for the mixture milled for 15 min relative to the non-milled mixture. The maximum temperature developed during thermal explosion increased in the mixture milled for 1 min relative to the non-milled mixture and then decreased with the milling time reaching the level of the non-milled mixture after 15 min of milling. The observed dependence of the maximum temperature on the milling time is related to the net effect of mixing uniformity improvement between the reactants and a partial transformation of the reaction mixtures into Ni(B) solid solutions and Ni3B during milling. The proposed synthesis route of a single-phase Ni3B powder has advantages of short processing time and low-energy consumption.

Notes

Acknowledgements

This study was conducted within the state assignment to ISSCM SB RAS (Project 0301-2018-0001).

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Kostetskiy II, L’vov SN (1972) Certain physical properties of cobalt and nickel borides. Fiz Met Metalloved 33:773–779 (in Russian) Google Scholar
  2. 2.
    Lee ES, Park SK, Park YH (2015) Structural and physical properties of bulk Ni–B alloys processed through powder metallurgy. J Ceram Process Res 16:380–384Google Scholar
  3. 3.
    Shelud’ko VE, Paustovskii AV, Rud’ BM, Tel’nikov EY, Smertenko PS, Kremenitskii VV, Zakharchenko IV (2014) Modification of the structure and properties of Ni3B-based thick films by the action of laser radiation. Surf Eng Appl Electrochem 50:419–426CrossRefGoogle Scholar
  4. 4.
    Kapfenberger C, Hofmann K, Albert B (2003) Room-temperature synthesis of metal borides. Solid State Sci 5:925–930CrossRefGoogle Scholar
  5. 5.
    Arivu M, Masud J, Umapathi S, Nath M (2018) Facile synthesis of Ni3B/rGO nanocomposite as an efficient electrocatalyst for the oxygen evolution reaction in alkaline media. Electrochem Commun 86:121–125CrossRefGoogle Scholar
  6. 6.
    Schaefer ZL, Ke X, Schiffer P, Schaak RE (2008) Direct solution synthesis, reaction pathway studies, and structural characterization of crystalline Ni3B nanoparticles. J Phys Chem C 112:19846–19851CrossRefGoogle Scholar
  7. 7.
    Corrias A, Ennas G, Musinu A, Paschina G, Zedda D (1995) The preparation of nanocrystalline boride powders via a solid state reaction induced by the ball milling of nickel-boron mixtures. J Non Cryst Solids 192–193:565–569CrossRefGoogle Scholar
  8. 8.
    Corrias A, Ennas G, Marongiu G, Musinu A, Paschina G, Zedda D (1995) The synthesis of nanocrystalline nickel boride powders by ball milling of elemental components. Mater Sci Eng A 204:211–216CrossRefGoogle Scholar
  9. 9.
    Nazarian-Samani M, Kamali AR, Mobarra R, Nazarian-Samani M (2010) Phase transformations of Ni–15wt% B powders during mechanical alloying and annealing. Mater Lett 64:309–312CrossRefGoogle Scholar
  10. 10.
    Fadeeva VI, Sviridov IA, Kubalova LM (2009) Formation of metastable solid solutions of boron in nickel under mechanochemical synthesis from Ni–B and Ni–Nb–B mixtures. Inorg Mater 45:369–373CrossRefGoogle Scholar
  11. 11.
    Rák Z, Bucholz EW, Brenner DW (2015) Defect formation in aqueous environment: theoretical assessment of boron incorporation in nickel ferrite under conditions of an operating pressurized-water nuclear reactor (PWR). J Nucl Mater 461:350–356CrossRefGoogle Scholar
  12. 12.
    Rogachev AS, Mukasyan AS (2014) Combustion for material synthesis. CRC Press, LondonGoogle Scholar
  13. 13.
    Korchagin MA (2015) Thermal explosion in mechanically activated low-calorific-value compositions. Combust Explos Shock Waves 51:578–586CrossRefGoogle Scholar
  14. 14.
    Gutmanas EY, Gotman I (1999) Dense high-temperature ceramics by thermal explosion under pressure. J Eur Ceram Soc 19:2381–2393CrossRefGoogle Scholar
  15. 15.
    Filimonov VY, Korchagin MA, Smirnov EV, Sytnikov AA, Yakovlev VI, Lyakhov NZ (2011) Kinetics of mechanically activated high temperature synthesis of Ni3Al in the thermal explosion mode. Intermetallics 19:833–840CrossRefGoogle Scholar
  16. 16.
    Filimonov VY, Korchagin MA, Dietenberg IA, Tyumentsev AN, Lyakhov NZ (2013) High temperature synthesis of single-phase Ti3Al intermetallic compound in mechanically activated powder mixture. Powder Technol 235:606–613CrossRefGoogle Scholar
  17. 17.
    Korchagin MA, Bulina NV (2016) Superadiabatic regime of the thermal explosion in a mechanically activated mixture of tungsten with carbon black. Combust Explos Shock Waves 52:225–233CrossRefGoogle Scholar
  18. 18.
    Cheary RW, Coelho AA (1992) A fundamental parameters approach to X-ray line-profile fitting. J Appl Crystallogr 25:109–121CrossRefGoogle Scholar
  19. 19.
    Scardi P, Leoni M (2006) Line profile analysis: pattern modelling versus profile fitting. J Appl Crystallogr 39:24–31CrossRefGoogle Scholar
  20. 20.
    Brandes EA, Brook GB (1998) Smithells metal reference handbook, 7th edn. Butterworth-Heinemann, OxfordGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Institute of Solid State Chemistry and Mechanochemistry SB RASNovosibirskRussia
  2. 2.Novosibirsk State Technical UniversityNovosibirskRussia
  3. 3.National Research Tomsk State UniversityTomskRussia
  4. 4.Lavrentyev Institute of Hydrodynamics SB RASNovosibirskRussia
  5. 5.Novosibirsk State UniversityNovosibirskRussia

Personalised recommendations