Advertisement

Journal of Materials Science

, Volume 46, Issue 20, pp 6734–6743 | Cite as

PVC silver zeolite composites with antimicrobial properties

  • Daniela ZampinoEmail author
  • Tiziana Ferreri
  • Concetto Puglisi
  • Monique Mancuso
  • Renata Zaccone
  • Roberto Scaffaro
  • Danila Bennardo
Article

Abstract

Poly(vinyl chloride) (PVC) composites containing increasing amounts (2–20%, w/w) of silver zeolite (SZ) were prepared by melt mixing and characterized by thermal, mechanical and rheological analyses. The addition of large amount of SZ did not influence the processability and the formability of the composites, if compared to neat plasticized PVC. The antibacterial activity of PVC SZ composites was tested on Escherichia coli and Staphylococcus epidermidis and resulted promising both in culture broth and on agar plate and also in sterile urine seeded with these strains, for simulation purposes. In sterile urine, composites induced a significant reduction (4–6 log units) of viability of both strains already at 24 h, inhibiting E. coli growth up to 20 days, whereas their antimicrobial action against S. epidermidis vanished within 5 days. The silver release in sterile urine was determined up to 20 days. It was found that the highest amount of silver ions was released during the first day (0.365 ppm), whilst from days 6 to 20 the silver release decreased, reaching a steady daily mean value of 0.02 ppm.

Keywords

Zeolite Composite Film Inhibition Zone Bacterium Concentration Sterile Urine 

Notes

Acknowledgements

Financial support from the National Council Research (CNR, Rome) and from a POR Project (Sicilian Regional funds, Misura 3.14, grant no. 1999.IT.16.1.PO.011/3.14/5.2.13/0279) is gratefully acknowledged.

References

  1. 1.
    Kenawy E-R, Worley SD, Broughton R (2007) Biomacromolecules 8:1359CrossRefGoogle Scholar
  2. 2.
    Monteiro DR, Gorup LF, Takamiya AS, Ruvollo-Filho AC, Rodrigues de Camargo E, Barros Barbosa D (2009) Int J Antimicrob Agents 34:103CrossRefGoogle Scholar
  3. 3.
    Francolini I, Donelli G, Stoodley P (2003) Rev Eviron Sci Biotechnol 2:307CrossRefGoogle Scholar
  4. 4.
    Appendini A, Hotchkiss JH (2002) Innov Food Sci Emerg Technol 3:113CrossRefGoogle Scholar
  5. 5.
    Imazato S (2003) Dent Mater 19:449CrossRefGoogle Scholar
  6. 6.
    Markarian J (2009) Plast Addit Compd 11:18Google Scholar
  7. 7.
    Seyfriedsberger G, Rametsteiner K, Kern W (2006) Eur Polym J 42:3383CrossRefGoogle Scholar
  8. 8.
    Zhang W, Luo Y, Wang H, Jiang J, Pu S, Chu PK (2008) Acta Biomater 4:2028CrossRefGoogle Scholar
  9. 9.
    La Storia A, Ercolini D, Marinello F, Mauriello G (2008) J Food Sci 73:T48CrossRefGoogle Scholar
  10. 10.
    Jeong SH, Yeo SY, Yi SC (2005) J Mater Sci 40:5407. doi: https://doi.org/10.1007/s10853-005-4339-8 CrossRefGoogle Scholar
  11. 11.
    Yeo SY, Lee HJ, Jeong SH (2003) J Mater Sci 38:2143. doi: https://doi.org/10.1023/A:1023767828656 CrossRefGoogle Scholar
  12. 12.
    Radheshkumar C, Munstedt H (2006) React Funct Polym 66:780CrossRefGoogle Scholar
  13. 13.
    Pollini M, Russo M, Licciulli A, Sannino A, Maffezzoli A (2009) J Mater Sci Mater Med 20:2316CrossRefGoogle Scholar
  14. 14.
    Balazs DJ, Triandafillu K, Wood P, Chevolot Y, van Delden C, Harms H, Hollenstein C, Mathieu JH (2004) Biomaterials 25:2139CrossRefGoogle Scholar
  15. 15.
    Mbhele ZH, Salemane MG, van Sittert CGCE, Nedeljković JM, Djoković V, Luyt AS (2003) Chem Mater 15:5019CrossRefGoogle Scholar
  16. 16.
    Aumsuwan N, Heinhorst S, Urban MW (2007) Biomacromolecules 8:713CrossRefGoogle Scholar
  17. 17.
    Cho JW, So JH (2006) Mater Lett 60:2653CrossRefGoogle Scholar
  18. 18.
    Dowling DP, Betts AJ, Pope C, McConnell ML, Eloy R, Arnaud MN (2003) Surf Coat Technol 163–164:637CrossRefGoogle Scholar
  19. 19.
    Tunney MM, Gorman SP (2002) Biomaterials 60:4601CrossRefGoogle Scholar
  20. 20.
    Kumar R, Munstedt H (2005) Biomaterials 26:2081CrossRefGoogle Scholar
  21. 21.
    Southward RE, Thompson DW, St. Clair AK (1997) Chem Mater 9:501CrossRefGoogle Scholar
  22. 22.
    Blaker JJ, Nazhat SN, Boccaccini AR (2004) Biomaterials 25:1319CrossRefGoogle Scholar
  23. 23.
    Son WK, Youk JH, Park WH (2006) Carbohydr Polym 65:430CrossRefGoogle Scholar
  24. 24.
    Tambe SM, Sampath L, Modak SM (2001) J Antimicrob Chemother 47:589CrossRefGoogle Scholar
  25. 25.
    Silver S (2003) FEMS Microbiol Rev 27:341CrossRefGoogle Scholar
  26. 26.
    Furno F, Morley KS, Wong B, Sharp BL, Arnold PL, Howdle SM, Bayston R, Brown PD, Winship PD, Reid HJ (2004) J Antimicrob Chemother 54:1019CrossRefGoogle Scholar
  27. 27.
    Edwards-Jones V (2009) Lett Appl Microbiol 49:147CrossRefGoogle Scholar
  28. 28.
    Yamanaka M, Hara K, Kudo J (2005) Appl Environ Microbiol 71:7589CrossRefGoogle Scholar
  29. 29.
    Feng QL, Wu J, Chen GQ, Cui FZ, Kim TN, Kim JO (2000) J Biomed Mater Res A 52:662CrossRefGoogle Scholar
  30. 30.
    Favia P, Sardella E, Gristina R, d’Agostino R (2003) Surf Coat Technol 169–170:707CrossRefGoogle Scholar
  31. 31.
    Davenas J, Thevenard P, Philippe F, Arnaud MN (2002) Biomol Eng 19:263CrossRefGoogle Scholar
  32. 32.
    Dowling DP, Donnelly K, McConnell ML, Eloy R, Arnaud MN (2001) Thin Solid Films 398–399:602CrossRefGoogle Scholar
  33. 33.
    Gray JE, Norton PR, Alnouno R, Marolda CL, Valvano MA, Griffiths K (2003) Biomaterials 24:2759CrossRefGoogle Scholar
  34. 34.
    Liu Y-C, Lin L-H (2004) Electrochem Commun 6:1163CrossRefGoogle Scholar
  35. 35.
    AgION antimicrobial. https://doi.org/www.agion-tech.com. Accessed 3 Feb 2011
  36. 36.
    Matsumura Y, Yoshikata K, Kunisaki S-I, Tsuchido T (2003) Appl Environ Microbiol 69:278CrossRefGoogle Scholar
  37. 37.
    Inoue Y, Hoshino M, Takahashi H, Noguchi T, Murata T, Kanzaki Y, Hamashima H, Sasatsu M (2002) J Inorg Biochem 92:37CrossRefGoogle Scholar
  38. 38.
    Trogolo JA (2005) Water Cond Purif 5:27. https://doi.org/www.wcponline.com/pdf/0505%20Clean%20Silver.pdf. Accessed 3 Feb 2011
  39. 39.
    Quintavalla S, Vicini L (2002) Meat Sci 62:373CrossRefGoogle Scholar
  40. 40.
    Khare MD, Bukhari SS, Swann A, Spiers P, McLaren I, Myers J (2007) J Infect 54:146CrossRefGoogle Scholar
  41. 41.
    Loertzer H, Soukup J, Hamza A, Wicht A, Rettkowski O, Koch E, Fornara P (2006) Transpl Proc 38:707CrossRefGoogle Scholar
  42. 42.
    Rusin P, Brigth K, Gerba C (2003) Lett Appl Microbiol 36:69CrossRefGoogle Scholar
  43. 43.
    Cowan MM, Abshire KZ, Houk SL, Evans SN (2003) J Ind Microbiol Biotechnol 30:102CrossRefGoogle Scholar
  44. 44.
    Galeano B, Korff E, Nicholson W (2003) Appl Environ Microbiol 69:4329CrossRefGoogle Scholar
  45. 45.
    Casemiro LA, Martins CHG, de Carvalho Panzeri P, ires-de-Souza F, Panzeri H (2008) Gerodontology 25:187CrossRefGoogle Scholar
  46. 46.
    Abe Y, Ishii M, Takeuchi M, Ueshige M, Tanaka M, Akagawa Y (2004) J Oral Rehabil 31:568CrossRefGoogle Scholar
  47. 47.
    Hotta M, Nakajima H, Yamamoto K, Aono M (1998) J Oral Rehabil 25:485CrossRefGoogle Scholar
  48. 48.
    Kawahara K, Tsuruda K, Morishita M, Uchida M (2000) Dent Mater 16:452CrossRefGoogle Scholar
  49. 49.
    Nakane T, Gomyo H, Sasaki I, Kimoto Y, Hanzawa N, Teshima Y, Namba T (2006) Int J Cosmet Sci 28:299CrossRefGoogle Scholar
  50. 50.
    Montaudo G, Puglisi C (1991) Polym Degrad Stab 33:229CrossRefGoogle Scholar
  51. 51.
    Pehlivan H, Balköse D, Ülkü S, Tihminlioğlu F (2005) Compos Sci Technol 65:2049CrossRefGoogle Scholar
  52. 52.
    Fernández A, Soriano E, Hernández-Munoz P, Gavara R (2010) J Food Sci 75:E186CrossRefGoogle Scholar
  53. 53.
    Kaali P, Momcilovic D, Markström A, Aune R, Czel G, Karlsson S (2010) J Appl Polym Sci 95:1456Google Scholar
  54. 54.
    Kamışoğlu K, Aksoy EA, Akata B, Hasirci N, Bac N (2008) J Appl Polym Sci 110:2854CrossRefGoogle Scholar
  55. 55.
  56. 56.
    Jung WK, Koo HC, Kim KW, Shin S, Kim SH, Park YH (2008) Mycoses 50:265CrossRefGoogle Scholar
  57. 57.
    Egger S, Lehmann RP, Height MJ, Loessner MJ, Schuppler M (2009) Appl Environ Microbiol 75:2973CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2011

Authors and Affiliations

  • Daniela Zampino
    • 1
    Email author
  • Tiziana Ferreri
    • 1
  • Concetto Puglisi
    • 1
  • Monique Mancuso
    • 2
  • Renata Zaccone
    • 2
  • Roberto Scaffaro
    • 3
  • Danila Bennardo
    • 4
  1. 1.Institute of Chemistry and Technology of PolymersCNRCataniaItaly
  2. 2.Institute for Coastal Marine EnvironmentCNRMessinaItaly
  3. 3.Department of Chemical, Process and Materials EngineeringUNIPAPalermoItaly
  4. 4.Milena Pharmaceutical SrlAgrigentoItaly

Personalised recommendations