Advertisement

Journal of Materials Science

, Volume 46, Issue 18, pp 6131–6139 | Cite as

Fracture analysis of ceramic femoral head in hip arthroplasty based on microdamage monitoring using acoustic emission

  • Yukiya Yamada
  • Shuichi WakayamaEmail author
  • Junji Ikeda
  • Fumiaki Miyaji
Article
  • 156 Downloads

Abstract

Damage accumulation during compression testing of the alumina femoral head used in hip arthroplasty was monitored using an acoustic emission (AE) technique. Because a number of mechanical noises due to friction disturbed the AE measurement during the test using a conventional testing configuration standardized in ISO 7206, the testing apparatus was modified so that AE signals from microdamage were detected successfully. During the compression tests of femoral heads, a rapid increase in AE energy was observed before the final fracture. Dye penetration observations demonstrated that the rapid increase in AE energy correlated with the formation of maincrack which leads to the final fracture. The stress distribution in femoral heads was analyzed using finite element analysis (FEA). The critical stress for maincrack formation and the final fracture strength were determined. Finally, fundamental insights into the development of a technique for assessing the long-term reliability of ceramic femoral heads were obtained.

Keywords

Femoral Head Acoustic Emission Compression Test Final Fracture Acoustic Emission Signal 

References

  1. 1.
    Hench LL (1993) Bioceramics. J Amer Ceram Soc 81:1705CrossRefGoogle Scholar
  2. 2.
    Hench LL, Wilson J (1993) An introduction to bioceramics. World Scientific, SingaporeCrossRefGoogle Scholar
  3. 3.
    Clarke IC et al (2003) J Bone Joint Surg 85-A:73CrossRefGoogle Scholar
  4. 4.
    Evans AG (1972) J Mater Sci 7:1137. doi: https://doi.org/10.1007/BF00550196 CrossRefGoogle Scholar
  5. 5.
    Evans AG, Linzer M (1973) J Amer Ceram Soc 56:575CrossRefGoogle Scholar
  6. 6.
    Davidge RW, McLaren JR, Tappin G (1973) J Mater Sci 8:1699. doi: https://doi.org/10.1007/BF02403519 CrossRefGoogle Scholar
  7. 7.
    Evans AG, Wiederhorn SM (1974) Int Jour Fracture 10:379CrossRefGoogle Scholar
  8. 8.
    Ritter JE Jr, Oates PB, Fuller ER Jr, Wiederhorn SM (1980) J Mater Sci 15:2275. doi: https://doi.org/10.1007/BF00552317 CrossRefGoogle Scholar
  9. 9.
    Fuller ER Jr, Wiederhorn SM, Ritter JE Jr, Oates PB Jr, Wiederhorn SM, Ritter JE Jr, Oates PB (1980) J Mater Sci 15:2282. doi: https://doi.org/10.1007/BF00552318 CrossRefGoogle Scholar
  10. 10.
    Weisse B, Affolter C, Koller RE, Stutz A (2010) Proc IMechE Part H 224:1051Google Scholar
  11. 11.
    Wakayama S, Koji T, Nishimura H (1991) Trans Jap Soc Mech Eng 57:504CrossRefGoogle Scholar
  12. 12.
    Wakayama S, Nishimura H (1992) In: Fracture mechanics of ceramics, vol 10. Plenum Publishing Co., New YorkCrossRefGoogle Scholar
  13. 13.
    Wakayama S, Ikeda C, Ikeda J (2006) J Acoustic Emission 24:228Google Scholar
  14. 14.
    ISO-7206-10, Implants for surgery—Partial and total hip-joint prosthesis—Part 10: determination of resistance to static load of modular femoral headGoogle Scholar
  15. 15.
    Wakayama S, Horide A, Kawahara M (1999) In: Proceedings of the 12th International conference on composite materials (CD-ROM), ParisGoogle Scholar
  16. 16.
    Horide A, Wakayama S, Kawahara M (1999) Adv Compos Mater 8:139CrossRefGoogle Scholar
  17. 17.
    Weibull W (1951) J Appl Mech 18:293Google Scholar
  18. 18.
    FDA Guidance (draft), Guidance Document for the Preparation of Premarket Notification for Ceramic Ball Hip SystemGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2011

Authors and Affiliations

  • Yukiya Yamada
    • 1
  • Shuichi Wakayama
    • 1
    Email author
  • Junji Ikeda
    • 2
  • Fumiaki Miyaji
    • 2
  1. 1.Graduate Student of Mechanical EngineeringTokyo Metropolitan UniversityHachiojiJapan
  2. 2.Japan Medical Materials CoYodogawaJapan

Personalised recommendations