Advertisement

Journal of Materials Science

, Volume 45, Issue 1, pp 51–63 | Cite as

Modifying the surface energy and hydrophobicity of the low-density silica aerogels through the use of combinations of surface-modification agents

  • A. Parvathy RaoEmail author
  • A. Venkateswara Rao
Article

Abstract

Aerogels are lightweight, highly transparent, thermally insulating materials comprising interconnected nanostructured pores. Low surface energy aerogels were prepared from ambient pressure drying of sodium silicate-based gels by modifying the pore surfaces with silylating agents including trimethylchlorosilane (TMCS), hexamethyldisiloxane (HMDSO), and hexamethyldisilazane (HMDZ), in combination with each other. Hydrophobic properties of the resulted aerogels were studied by contact angle measurements. Fourier-transform infrared spectroscopy (FTIR) was used to monitor the changes in chemical bonds within the aerogels due to surface modification. The microstructure was studied by transmission electron microscopy (TEM). Effect of temperature on the hydrophobicity of the aerogels was studied by thermogravimetric analysis/differential thermal analysis (TGA-DTA). Surface modification of silica gels with various mixtures of surface-modification agents showed different behaviors. Aerogels made by HMDZ and HMDSO combination comprised 5 nm pores and particles and showed a high surface energy, whereas aerogels prepared by HMDSO and TMCS combination had lower surface energy with relatively larger particle and pore sizes with a more uniform distribution of both. The properties of the latter sample were attributed to a greater degree of surface modification and negligible condensation of OH groups. This preparation produced silica aerogels with a low density (0.042 g/cc), low surface energy (3.39 N cm−1), low thermal conductivity (0.050 W K−1 m−1), high optical transmission (85% at 700 nm) and hydrophobic (154° contact angle) with high hydrophobic thermal stability (425 °C). Moreover, the contact angle for materials prepared by this method decreased negligibly over 12 months’ storage in ambient conditions.

Keywords

Contact Angle Surface Modification Pore Size Distribution Capillary Pressure Water Drop 

Notes

Acknowledgements

Authors are grateful to the Condensed Matter Advisory Committee, Department of Science and Technology (DST), New Delhi, Government of India, for the financial support for this work through a major research project on “Aerogels” (No. SR/S2/CMP-67/2006).

References

  1. 1.
    Yoldas BE, Annen MJ, Bostaph J (2000) Chem Mater 12:2475CrossRefGoogle Scholar
  2. 2.
    Forest L, Gibiat C, Woignier T (1998) In: Proceedings of the fifth international symposium on aerogels (ISA 5). J Non-Cryst Solids 225:287Google Scholar
  3. 3.
    Guise MT, Hosticka B, Earp BC, Norris PM (1995) In: Proceedings of the fourth international symposium on aerogels (ISA 4). J Non-Cryst Solids 186:317Google Scholar
  4. 4.
    Pajonk GM (1991) Appl Catal 72:217CrossRefGoogle Scholar
  5. 5.
    Venkateswara Rao A, Hegde ND, Hirashima H (2007) J Colloid Interface Sci 305:124CrossRefGoogle Scholar
  6. 6.
    Kim GS, Hyun SH (2004) Thin Solid Films 460(1–2):190–200CrossRefGoogle Scholar
  7. 7.
    Jones SM (2007) J Sol-Gel Sci Technol 40(16):351Google Scholar
  8. 8.
    Kistler SS (1931) Nature 227:741CrossRefGoogle Scholar
  9. 9.
    Nakajima K et al (1996) Kogyo-zairyo 44:68Google Scholar
  10. 10.
    Brinker CJ, Scherer GW (1989) Sol-gel science. Academic, New YorkGoogle Scholar
  11. 11.
    Kim GS, Hyun SH, Park HH (2001) J Am Ceram Soc 84:453CrossRefGoogle Scholar
  12. 12.
    Deshpande R, Smith D, Brinker CJ (1996) US Patent 5,565,142Google Scholar
  13. 13.
    Parvathy Rao A, Pajonk GM, Venkateswara Rao A (2005) J Mater Sci 40:3481. doi: https://doi.org/10.1007/s10853-005-2853-3 CrossRefGoogle Scholar
  14. 14.
    Parvathy Rao A, Venkateswara Rao A, Pajonk GM, Shewale P (2007) J Mater Sci 42:8418. doi: https://doi.org/10.1007/s10853-007-1788-2 CrossRefGoogle Scholar
  15. 15.
    Parvathy Rao A, Venkateswara Rao A, Gurav JL (2008) J Porous Mater 15:507CrossRefGoogle Scholar
  16. 16.
    Shewale P, Venkateswara Rao A, Gurav JL, Parvathy Rao A (2009) J Porous Mater 16(1):101CrossRefGoogle Scholar
  17. 17.
    Parvathy Rao A, Venkateswara Rao A (2008) J Non-Cryst Solids 354:10CrossRefGoogle Scholar
  18. 18.
    Parvathy Rao A, Venkateswara Rao A, Bangi Uzma K (2008) J Sol-Gel Sci Technol 47:85CrossRefGoogle Scholar
  19. 19.
    Shewale P, Venkateswara Rao A, Parvathy Rao A (2009) J Sol-Gel Sci Technol 49:285CrossRefGoogle Scholar
  20. 20.
    Uzma K, Bangi H, Venkateswara Rao , A Parvathy Rao (2008) Science and Technology of Advanced Materials 9Google Scholar
  21. 21.
    Chibowski E (2003) Adv Colloidal Interface Sci 103:149CrossRefGoogle Scholar
  22. 22.
    van Oss CJ, Giese RF, Wu W (1998) J Dispers Sci Technol 19:1221CrossRefGoogle Scholar
  23. 23.
    Blake TD (1993) In: Berg JC (ed) Wettabiltiy. Marcel Dekker, New YorkGoogle Scholar
  24. 24.
    Cassie ABD, Baxter S (1944) Trand Faraday Soc 43:546CrossRefGoogle Scholar
  25. 25.
    Wenzel RN (1936) Ind Eng Chem 28:988CrossRefGoogle Scholar
  26. 26.
    Dettre RH, Johnson RE Jr (1963) Adv Chem Soc 43:136CrossRefGoogle Scholar
  27. 27.
    Drelich J, Miller JD, Good RJ (1996) J Colloid Interface Sci 179:37CrossRefGoogle Scholar
  28. 28.
    Drelich J (1997) J Adhes 63:31CrossRefGoogle Scholar
  29. 29.
    Tien P, Chau LK (1999) Chem Mater 11:2141CrossRefGoogle Scholar
  30. 30.
    Lee CJ, Kim GS, Hurd AJ (2002) J Mater Sci 37(11):2237. doi: https://doi.org/10.1023/A:1015309014546 CrossRefGoogle Scholar
  31. 31.
    Prakash SS, Brinker CJ, Hurd AJ (1995) J Non Cryst Solids 190(3):264CrossRefGoogle Scholar
  32. 32.
    Jeong AeY, Goo SM, Kim DP (2000) J Sol-Gel Technol 19:483CrossRefGoogle Scholar
  33. 33.
    Shi F, Wang LJ, Liu JX, Li N (2004) Building materials 6:9, in ChineseGoogle Scholar
  34. 34.
    Fidalgo A, Ilharco LM (2005) Microporous Mesoporous Mater 84:229CrossRefGoogle Scholar
  35. 35.
    Rouquerol F, Rouquerol J, Sing K (1999) Adsorption by powders and porous solids, principles, methodology and applications. Academic PressGoogle Scholar
  36. 36.
    Barret EP, Joyer LG, Halenda PP (1951) J Am Chem Soc 73:373CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2009

Authors and Affiliations

  1. 1.Air Glass Laboratory, Department of PhysicsShivaji UniversityKolhapurIndia

Personalised recommendations