Advertisement

Journal of Materials Science

, Volume 44, Issue 16, pp 4296–4302 | Cite as

Novel sintered glass-ceramics from vitrified oil well drill cuttings

  • O. E. Abbe
  • S. M. GrimesEmail author
  • G. D. Fowler
  • A. R. Boccaccini
Article

Abstract

An amorphous glass was obtained by melting drill cuttings from oil and gas exploration and production operations in the North Sea that have been blended with sodium and calcium oxides to minimise the melting temperature. Mixtures containing dried drill cuttings:sodium oxide:calcium oxide in the weight ratio 8:1:1 held at 1300 °C for 5 h produce an amorphous solid that can be further treated at temperatures between 750 and 800 °C to give a largely crystalline glass-ceramic. The glass-ceramics have been characterised by physical, chemical and mechanical analyses and shown to have properties of machinability, strength, wear-abrasiveness, thermal resistance, resistance to crack propagation, and stability towards leaching that make the materials suitable for tiling applications, allowing diversion of the drill cutting wastes from final disposal in landfill.

Keywords

Fracture Toughness Final Disposal Calcium Oxide Drill Cutting Brittleness Index 

Notes

Acknowledgements

The authors wish to thank Petroleum Technology Development Fund of Nigeria (for a grant to OEA), Shell UK E&P Aberdeen (for provision of drill cutting samples) and Professor John Donaldson and Dr. Amutha Devaraj for helpful advice.

References

  1. 1.
    Scholten MCT, Karman CC, Huwer S (2000) Toxicol Lett 112–113:283CrossRefGoogle Scholar
  2. 2.
    Chilingarian GV, Vorabutr P (1981) Drilling and drilling fluids. Elsevier Scientific Publishing, AmsterdamGoogle Scholar
  3. 3.
    Patin SA (1999) Environmental impact of the offshore oil and gas industry. Ecomonitor Publishing, New YorkGoogle Scholar
  4. 4.
    Bernardo G, Marroccoli M, Nobili M, Telesca A, Valenti GL (2007) Resour Conservat Recycl 52:95CrossRefGoogle Scholar
  5. 5.
    Chen T, Lin S, Lin Z (2007) An innovative utilization of drilling waste as building materials. In: Paper SPE 106913 presented at the 2007 SPE E&P Environmental and Safety Conference, Galveston, TX, USA, 5–7 March 2007Google Scholar
  6. 6.
    Smith M, Manning A, Lang M (1999) Research on the re-use of drill cuttings onshore. Report no. Cordah/COR012/1999, Cordah Research Limited, Aberdeen, Scotland, for Talisman Energy (UK), 11 November 1999Google Scholar
  7. 7.
    Willis JM, Hester MW, Shaffer GP (2005) Ecol Eng 25:41CrossRefGoogle Scholar
  8. 8.
    Ji GD, Yang YS, Zhou Q, Sun T, Ni JR (2004) Environ Int 30:509CrossRefGoogle Scholar
  9. 9.
    Weiss JS, Weiss P (2004) Environ Int 30:685CrossRefGoogle Scholar
  10. 10.
    Veil JA (2003) J Energ Resour Tech 125(3):238CrossRefGoogle Scholar
  11. 11.
    Al-Ansary MS, Al-Tabbaa A (2006) J Hazard Mater 141:410CrossRefGoogle Scholar
  12. 12.
    Rawlings RD, Wu JP, Boccaccini AR (2006) J Mater Sci 41:733. doi: https://doi.org/10.1007/s10853-006-6554-3 CrossRefGoogle Scholar
  13. 13.
    British Standards, BS ISO 14869-2:2002Google Scholar
  14. 14.
    British Standards, BS EN 12457-3:2002Google Scholar
  15. 15.
    Höland W, Beall G (2002) Glass-ceramic technology. The American Ceramic Society, USAGoogle Scholar
  16. 16.
    British Standards, BS EN ISO 10545-3:1997Google Scholar
  17. 17.
    Boccaccini AR, Thomas BJC, Brusatin G, Colombo P (2007) J Mater Sci 42:2030. doi: https://doi.org/10.1007/s10853-006-0540-7 CrossRefGoogle Scholar
  18. 18.
    Wachtman JB (1996) Mechanical properties of ceramics. Wiley, CanadaGoogle Scholar
  19. 19.
    British Standards, BS EN ISO 12680-1:2007Google Scholar
  20. 20.
    Leroy C, Ferro MC, Monteiro RCC, Fernandes MHV (2001) J Eur Ceram Soc 21:195CrossRefGoogle Scholar
  21. 21.
    Page PW, Greaves C, Lawson R, Hayes S, Boyle F (2003) Options for the recycling of drill cuttings. In: Paper SPE 80583 presented at the SPE/EPA/DOE exploration and production environmental conference, San Antonio, TX, USA, 10–12 March 2003Google Scholar
  22. 22.
    Neff JM (2005), Composition, environmental fates, and biological effects of water based drilling muds and cuttings discharged to the marine environment: a synthesis and annotated bibliography. Prepared for Petroleum Environmental Research Forum and American Petroleum Institute, January 2005Google Scholar
  23. 23.
    Kakali G, Perraki T, Tsivillis S, Badogiannis E (2001) Appl Clay Sci 20:73CrossRefGoogle Scholar
  24. 24.
    ACerS-NIST Phase Diagram CD-ROM Database Version 3.2, Copyright 2008, Figure 04544. The American Ceramic Society (ACerS), Westerville, Ohio, USAGoogle Scholar
  25. 25.
    Davim E, Fernandes MHV (2007) Glass Technol Eur J Glass Sci Tech 48(4):164Google Scholar
  26. 26.
    Suzuki S, Tanaka M, Kaneko T (1997) J Mater Sci 32:1775CrossRefGoogle Scholar
  27. 27.
    Boccaccini AR (1997) J Mater Process Tech 65:302CrossRefGoogle Scholar
  28. 28.
    Boccaccini AR (1999) Interceram 48:176Google Scholar
  29. 29.
    Abdel-Hameed SAM, El-kheshen AA (2003) Ceram Int 29:265CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2009

Authors and Affiliations

  • O. E. Abbe
    • 1
  • S. M. Grimes
    • 1
    Email author
  • G. D. Fowler
    • 1
  • A. R. Boccaccini
    • 2
  1. 1.Centre for Sustainable Production and Resource Efficiency, Department of Civil and Environmental EngineeringImperial College LondonLondonUK
  2. 2.Department of MaterialsImperial College LondonLondonUK

Personalised recommendations