Advertisement

Journal of Materials Science

, Volume 43, Issue 13, pp 4567–4572 | Cite as

Tribological properties of MoS2 and carbon fiber reinforced polyimide composites

  • X. R. Zhang
  • X. Q. Pei
  • Q. H. WangEmail author
Article

Abstract

The tribological properties of carbon fiber reinforced polyimide (PI) composites with different MoS2 containing sliding against GCr15 steel were comparatively evaluated on an M-2000 model ring-on-block test rig. The wear mechanisms were also comparatively discussed, based on scanning electron microscopic examination of the worn surface of the PI composites and the transfer film formed on the counterpart. It was found that small incorporation of MoS2 was harmful to the improvement of friction and wear behaviors of carbon fiber reinforced PI composites. However, it was found that the increasing filler of MoS2 significantly improved the wear resistance and decreased the friction coefficient of carbon fiber reinforced PI composites. It was also found that the tribological properties of MoS2 and short carbon fiber reinforced PI composites were closely related with the sliding condition such as sliding rate and applied load.

Keywords

Friction Coefficient Carbon Fiber Wear Rate MoS2 Wear Surface 

Notes

Acknowledgements

The authors would like to acknowledge the financial support of the Innovative Group Foundation from NSFC (Grant No. 50421502) and the National Natural Science Foundation of China (Grant No. 50475128) and the important direction project for the knowledge innovative engineering of Chinese Academy of Sciences (Grant No. KGCX3-SYW-205).

References

  1. 1.
    Jia JH, Zhou HD, Gao SQ, Chen JM (2003) Mater Sci Eng A 356:48. doi: https://doi.org/10.1016/S0921-5093(03)00052-2 CrossRefGoogle Scholar
  2. 2.
    Zhou HD, Chen JM, Jia JH (2001) Mater Sci Eng A 302:222. doi: https://doi.org/10.1016/S0921-5093(00)01820-7 CrossRefGoogle Scholar
  3. 3.
    La PQ, Xue QJ, Liu WM (2000) Mater Sci Eng A 277:266. doi: https://doi.org/10.1016/S0921-5093(99)00546-8 CrossRefGoogle Scholar
  4. 4.
    Bae YW, Lee WY, Besmann TM, Yust CS (1996) Mater Sci Eng A 209:72. doi: https://doi.org/10.1016/0921-5093(95)10149-7 CrossRefGoogle Scholar
  5. 5.
    Bahadur S, Polineni VK (1996) Wear 200:95. doi: https://doi.org/10.1016/S0043-1648(96)07327-9 CrossRefGoogle Scholar
  6. 6.
    Price DM (2001) Thermochim Acta 367–368:253. doi: https://doi.org/10.1016/S0040-6031(00)00676-6 CrossRefGoogle Scholar
  7. 7.
    Donnet JB, Bansal RC, Wang MJ (1990) Carbon fibers. Dekker, New YorkGoogle Scholar
  8. 8.
    Chand S (2003) J Mater Sci 35:1303. doi: https://doi.org/10.1023/A:1004780301489 CrossRefGoogle Scholar
  9. 9.
    Friedrich K, Flock J (2001) Wear 251:1202 CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2008

Authors and Affiliations

  1. 1.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhouChina

Personalised recommendations