Advertisement

Journal of Materials Science

, Volume 43, Issue 9, pp 3289–3295 | Cite as

Viscoelasticity and fracture toughness of blended epoxy resins containing two monomers with different molecular weights

  • Andi Haris
  • Tadaharu AdachiEmail author
  • Wakako Araki
Article

Abstract

In the present work, we investigated the thermo-viscoelasticity and fracture toughness of various cured blends of two epoxy monomers with different molecular weights: 380 (Epikote 828) and 900 (Epikote 1001). The blended resins were easily prepared, and miscibility (no phase separation) in the blended resins was expected. The composition of the blended epoxy resins ranged from 0 to 100% by weight of the Epikote 1001. The measured damping factor and dynamic loss modulus in the glass-transition confirmed that each blended resin had a single phase, i.e., they were miscible. The fracture toughness at room temperature increased modestly with the Epikote 1001 content over the whole range (0–100 wt%). We found that below the glass-transition temperature, the macromolecular modifications enabled tailoring of the fracture toughness while maintaining the glassy bending modulus and with little change in the glass-transition temperature.

Keywords

Fracture Toughness Storage Modulus Dynamic Mechanical Thermal Analysis Loss Modulo Epoxy Network 

References

  1. 1.
    Kinloch AJ, Shaw SJ, Tod DA, Hunston DL (1983) Polymer 24:1341CrossRefGoogle Scholar
  2. 2.
    Ratna D, Banthia A (2000) Polym Int 49:281CrossRefGoogle Scholar
  3. 3.
    Ratna D, Chakraborty BC, Deb PC (1997) J Polym Mater 14:189Google Scholar
  4. 4.
    Moloney AC, Kausch HH, Stieger HR (1983) J Mater Sci 18:208CrossRefGoogle Scholar
  5. 5.
    Moloney AC, Kausch HH, Stieger HR (1984) J Mater Sci 19:1125CrossRefGoogle Scholar
  6. 6.
    Moloney AC, Kausch HH, Kaiser T, Beer HR (1987) J Mater Sci 22:381CrossRefGoogle Scholar
  7. 7.
    Adachi T, Araki W, Nakahara T, Yamaji A, Gamao M (2002) J Appl Polym Sci 86:2261CrossRefGoogle Scholar
  8. 8.
    Kwon SC, Adachi T (2007) J Mat Sci 42:5516CrossRefGoogle Scholar
  9. 9.
    He B, Yang Y, Zou H, Zhang Q, Fu Q (2005) Polymer 46:7624CrossRefGoogle Scholar
  10. 10.
    Wu SJ, Lin TK, Shyu SS (2000) J App Polym Sci 75:26CrossRefGoogle Scholar
  11. 11.
    Bucknall CB, Partridge IK (1983) Polymer 24:639CrossRefGoogle Scholar
  12. 12.
    Kim BS, Chiba T, Inoue T (1995) Polymer 36:67CrossRefGoogle Scholar
  13. 13.
    Zubeldia A, Larrañaga M, Remiro P, Mondragon I (2004) J Polym Sci B 42:3920CrossRefGoogle Scholar
  14. 14.
    Sawa F, Nishijima S, Okada T (1995) Cryogenics 35:767CrossRefGoogle Scholar
  15. 15.
    Haris A, Adachi T, Hayashi Y, Araki W (2007) J Mater Sci 42:9859CrossRefGoogle Scholar
  16. 16.
    Benthem JP, Koiter WT (1975) In: Shih GC (ed) Mechanical fracture, vol 1. Methods of analysis and solutions of crack problems. Noordhoff International Publishing, Leyden, p 155Google Scholar
  17. 17.
    Klempner D, Frisch HL, Frisch KC (1972) J Polym Sci A-2 8:921CrossRefGoogle Scholar
  18. 18.
    Yenwo GM, Sperling LH, Pulido J, Manson JA, Conde A (1977) Polym Eng Sci 17:251CrossRefGoogle Scholar
  19. 19.
    Matsuo M, Kwei TK, Klempner D, Frisch KC (1970) Polym Eng Sci 10:327CrossRefGoogle Scholar
  20. 20.
    Pittman CU Jr, Xu X, Wang L, Toghiani H (2000) Polym Eng Sci 40:1405CrossRefGoogle Scholar
  21. 21.
    Ogata M, Kinjo N, Kawata T (1993) J App Polym Sci 48:583CrossRefGoogle Scholar
  22. 22.
    Kinloch AJ, Yuen ML, Jenkins SD (1994) J Mater Sci 29:3781CrossRefGoogle Scholar
  23. 23.
    Kinloch AJ (1987) Adhesion and adhesives: science and technology. Chapman & Hall, LondonCrossRefGoogle Scholar
  24. 24.
    Pearson RA, Yee AF (1989) J Mater Sci 24:2571CrossRefGoogle Scholar
  25. 25.
    Manzione LT, Gillham JK, McPherson CA (1981) J App Polym Sci 26:907CrossRefGoogle Scholar
  26. 26.
    Chen MC, Hourston DJ, Sun WB (1995) Eur Polym J 31:199CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2008

Authors and Affiliations

  1. 1.Department of Mechanical Sciences and EngineeringTokyo Institute of TechnologyTokyoJapan

Personalised recommendations