Enhancement of the generating power in Cu/Bi–Te/Cu composite thermoelectric devices
- 105 Downloads
The voltage ΔV and electric current ΔI of the p- and n-type Cu/Bi–Te/Cu composite thermoelectric devices were measured as a function of ΔT for four regions of the intrinsic Bi–Te compound, Cu/Bi–Te and Bi–Te/Cu interfaces and Cu/Bi–Te/Cu composite using thermocouples set at intervals of s = 2 and 6 mm, where the lengths of Bi–Te compound and copper are 4 and 5 mm, respectively. ΔV and ΔI of all regions tended to increase linearly with an increase of ΔT. The resultant α was obtained from the relation ΔV/ΔT. The resultant α values of regions including the interface are much higher in absolute value than those of the intrinsic Bi–Te compounds, so that the barrier thermo-emf is found to occur in the forward-bias direction. It indicates that the barrier thermo-emf appears even in the semiconductor-metal junction, as in the case of the p–n junctions. The resultant α of Cu(TH)/Bi–Te interface rich in the heat flow increases with an increase of ΔT, while that of Bi–Te/Cu(TC) interface poor in the heat flow decreases with an increase of ΔT. The ΔT-dependence of α of the interfaces is entirely opposite at the hot and cold sides. As a result, the resultant α of the p- and n-type Cu/Bi–Te/Cu composites remained little varied with changes of ΔT, so that the present composites have a thermal stability superior to the intrinsic Bi–Te compounds.The generating powers ΔWBi-Te and ΔWCu/Bi-Te/Cu for the p- and n-type intrinsic Bi–Te compounds and Cu/Bi–Te/Cu composites increased parabolalically with an increase of ΔT, and the ratios of ΔWCu/Bi–Te/Cu to ΔWBi–Te reached great values of 1.41 and 1.45 for the p- and n-type composites, respectively. It was thus found that the enhancement in the resultant α of the composite materials results in a significant improvement in the conversion efficiency for generators.
KeywordsSeebeck Coefficient Thermoelectric Material Energy Conversion Efficiency Cold Side Eutectic Solder
- 1.Ioffe AF (1965) Semiconductor thermoelements and thermoelectric cooling. Infosearch Ltd.Google Scholar
- 3.Harman TC, Hong JM (1967) Thermoelectric and thermomagnetic effects and applications. McGraw-Hill, New YorkGoogle Scholar
- 10.Balmush II, Dashevsky ZM, Kasiyan AI (1995) Semiconductors 29:937Google Scholar
- 17.Kittel C (1996) Introduction to solid state physics. Wiley, New YorkGoogle Scholar