Journal of Materials Science

, Volume 42, Issue 16, pp 6828–6836 | Cite as

Temperature dependence of the local Seebeck coefficient near the boundary in touching Cu/Bi–Te/Cu composites

  • Osamu YamashitaEmail author
  • Hirotaka Odahara


The thermo-emf ΔV and temperature difference ΔT across the boundary were measured as functions of r and I for the touching p- and n-type Cu/Bi–Te/Cu composites composed of tBi–Te = 2.0 mm and tCu = 0.3 mm, where r is the distance from the boundary and I is a direct current producing ΔT which flows through two Peltier modules connected in series. The resultant Seebeck coefficient α across the boundary is obtained from the relation α = ΔVT. As a result, the resultant |α| of the touching p- and n-type composites have a great local maximum value at r ≈ 0.03 mm and decrease rapidly with further increase of r to approach the intrinsic |αBi–Te|. The maximum resultant α of the p- and n-type composites reached great values of 1,043 and −1,187 μV/K at 303 K corresponding to I = 0.8 A and of 1,477 and −725 μV/K at 360 K corresponding to I = 2.0 A. Reflecting the temperature dependence of the intrinsic αBi–Te, the maximum α of the p-type composite increases with an increase of T, while that of the n-type one decrease with an increase of T. Surprisingly, the maximum α of the p- and n-type composites have great gradients of 8.36 and −7.15 μV/K2 in the range from 303 to 366 K, respectively, which are 21.8 and 134 times larger in absolute value than 0.383 and −0.0535 μV/K2 of the intrinsic p- and n-type αBi–Te, so that the maximum resultant α was thus found to be much more sensitive to temperature than the intrinsic αBi–Te. Moreover, the local Seebeck coefficient αl(r) derived analytically from the resultant α(r) is enhanced significantly in the narrow region below r ≈ 0.05 mm and the maximum αl values of the p- and n-type composites were found to have extremely great values of approximately 1,800 μV/K at 360 K and −1,400 μV/K at 303 K, respectively, which are approximately 7.3 and 6.5 times higher in absolute value than the intrinsic p- and n-type αBi–Te at the corresponding temperatures.


Seebeck Coefficient Thermoelectric Material Energy Conversion Efficiency Thermoelectric Generator Thermal Contact Resistance 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    Goldsmid HJ (1964) Thermoelectric refrigeration. Plenum, New YorkCrossRefGoogle Scholar
  2. 2.
    Bartowiak M, Mahan GD (2001) In: Tritt TM (ed) Recent trends in thermoelectric materials research II: semiconductors and semimetals, vol 70. Academic, New York, p 245Google Scholar
  3. 3.
    Hicks LD, Dresselhaus MS (1993) Phys Rev B 47:12727CrossRefGoogle Scholar
  4. 4.
    Hicks LD, Harman TC, Dresselhaus MS (1993) Appl Phys Lett 63:3230CrossRefGoogle Scholar
  5. 5.
    Koga T, Rabin O, Dresselhaus MS (2000) Phys Rev B 62:16703CrossRefGoogle Scholar
  6. 6.
    Venkatasubramanian R (2000) Phys Rev B 61:3091CrossRefGoogle Scholar
  7. 7.
    Venkatasubramanian R, Siivola E, Colpitts T, O’Quinn B (2001) Nature 413:597CrossRefGoogle Scholar
  8. 8.
    Yamashita O, Odahara H (2006) J Mater Sci 41:2795CrossRefGoogle Scholar
  9. 9.
    Tauc J (1953) Czechosl J Phys 3:282CrossRefGoogle Scholar
  10. 10.
    Balmush II, Dashevsky ZM, Kasiyan AI (1995) Semiconductors 29:937Google Scholar
  11. 11.
    Yamashita O, Odahara H, Satou K (2005) J Mater Sci 40:1071CrossRefGoogle Scholar
  12. 12.
    Yamashita O, Odahara H (2005) J Mater Sci (accepted)Google Scholar
  13. 13.
    Yamashita O, Tomiyoshi S (2004) J Appl Phys 95:6277CrossRefGoogle Scholar
  14. 14.
    Yamashita O, Tomiyoshi S (2004) J Appl Phys 95:161CrossRefGoogle Scholar
  15. 15.
    Yim WM, Rosi FD (1972) Solid State Electron 15:1121CrossRefGoogle Scholar
  16. 16.
    Kittel C (1996) Introduction to solid state physics. John Wiley & Sons, New YorkGoogle Scholar
  17. 17.
    Yamashita O, Odahara H (2006) J Appl Phys 99:123721CrossRefGoogle Scholar
  18. 18.
    Mahan GD, Bartkowiak M (1999) Appl Phys Lett 74:953CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2007

Authors and Affiliations

  1. 1.Materials Science, Co., Ltd.Ibaraki, OsakaJapan
  2. 2.Advanced Materials, Co., Ltd.Higashiosaka, OsakaJapan
  3. 3.Department of Materials and EngineeringEhime UniversityMatsuyamaJapan

Personalised recommendations