Advertisement

Journal of Materials Science

, Volume 42, Issue 3, pp 841–846 | Cite as

Impact fracture toughness of hollow glass bead-filled polypropylene composites

  • Ji-Zhao LiangEmail author
Article

Abstract

The notched Izod impact properties of polypropylene (PP) filled with hollow glass beads (HGB) have been measured at room temperature to identify the effects of the particle contents, size and its distribution on them in the present paper. The mean diameters of the particles were 11, 35, and 70 μm, and named TK10, TK35 and TK70 respectively. The surface of the particles was pretreated with silane coupling agent. The results showed that the notched Izod impact strength (σI) of the filled systems increased gently with increasing the volume fraction (φf) of the fillers when φf was less than 15%, and then it decreased. When φf was 10%, σI decreased with an increase of the mean diameter of the particles. Furthermore, the impact fracture surface of the specimens was observed by using a scanning electron microscope (SEM). The improvement of the impact toughness of the composites might be mainly attributed to the shear yielding first of the matrix around the beads to absorb relevant deformation energy under impact load.

Keywords

Impact Strength Filler Particle Silane Coupling Agent Scanning Electron Microscope Picture Impact Fracture 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Notes

Acknowledgement

The author would like to thank Mr. F.H. Li from our College for his help in the experiments

References

  1. 1.
    Wu S (1990) Polym Eng Sci 30:753CrossRefGoogle Scholar
  2. 2.
    Narkis M, Nicolais L (1971) J Appl Polym Sci 15:469CrossRefGoogle Scholar
  3. 3.
    Jiang W, Liu CH, Wang ZG et al (1998) Polymer 39:4437CrossRefGoogle Scholar
  4. 4.
    Ahmed S, Jones FR (1990) Composites 21:81CrossRefGoogle Scholar
  5. 5.
    Jancar J, Kucera J (1990) Polym Eng Sci 30:714CrossRefGoogle Scholar
  6. 6.
    Mitsui S, Kihara H, Yoshimi S, Okamoto Y (1996) Polym Eng Sci 36:2241CrossRefGoogle Scholar
  7. 7.
    Tszeng TC (1998) Composites 29B:299CrossRefGoogle Scholar
  8. 8.
    Liang JZ, Li RKY, Tjong SC (1999) Polym Compos 20:413CrossRefGoogle Scholar
  9. 9.
    Pukanszky B (1990) Composites 21:255CrossRefGoogle Scholar
  10. 10.
    Jancar J, Kucera J (1990) Polym Eng Sci 30:707CrossRefGoogle Scholar
  11. 11.
    Maiti SN, Mahapatro PK (1991) J Appl Polym Sci 42:3101CrossRefGoogle Scholar
  12. 12.
    Jancar J, Dibenedetto AT, Dianselmo A (1993) Polym Eng Sci 33:559CrossRefGoogle Scholar
  13. 13.
    Ou YC, Yu ZZ (1995) Polym Int 37:113CrossRefGoogle Scholar
  14. 14.
    Liang JZ, Li RKY (2000) Polym Int 49:170CrossRefGoogle Scholar
  15. 15.
    Liang JZ (2005) J Elast Plast 37(4):361CrossRefGoogle Scholar
  16. 16.
    Mouzakis DE, Stricker F, Mülhaupt R, Karger-Kocsis J (1998) J Mater Sci 33:2551CrossRefGoogle Scholar
  17. 17.
    Wu S (1985) Polymer 26:1855CrossRefGoogle Scholar
  18. 18.
    Wu S (1988) J Appl Polym Sci 35:549CrossRefGoogle Scholar
  19. 19.
    Liang JZ (2002) J Appl Polym Sci 83:1547CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  1. 1.College of Industrial Equipment and Control EngineeringSouth China University of TechnologyGuangzhouP.R. China

Personalised recommendations