Journal of Materials Science

, Volume 41, Issue 13, pp 4105–4116 | Cite as

Ballistic fibers: A review of the thermal, ultraviolet and hydrolytic stability of the benzoxazole ring structure

  • G. A. HolmesEmail author
  • K. Rice
  • C. R. Snyder


The penetration of a bullet proof vest worn by a first responder in 2003, resulted in the establishment of a research program designed to investigate the long-term stability and durability of all fibers that are used and have the potential to be used in ballistic applications. The Office of Law Enforcement Standards (OLES) of the National Institute of Standards and Technology (NIST) was charged with conducting this program under the auspices of the National Institute of Justice (NIJ). Because of the urgent need to understand the factors that contributed to this unexpected body armor penetration, the initial focus of this research program is on the ballistic fiber material that composed the compromised vest, i.e., poly[(benzo–[1,2-d:5,4-d′]-benzoxazole-2,6-diyl)-1,4-phenylene] (PBO) fiber. Since data related to the susceptibility of PBO fibers to environmental attack are limited and sometimes contradictory, this review also focuses on the susceptibility of the benzoxazole ring structure, a major component of the PBO chain structure, to environmental exposure conditions. A somewhat detailed discussion of the formation and degradation chemistry of this ring structure is presented to increase the reader’s understanding of how chemical structure and environmental factors may influence ballistic fiber degradation. To balance this discussion, the susceptibility of key linkages in other ballistic fibers to similar conditions is also presented. Therefore, this review seeks to link chemical structure to ballistic performance and provide a fundamental basis for predicting the long-term durability of existing and future ballistic fibers.


Electron Spin Resonance Ultra High Molecular Weight Polyethylene Benzoxazole Residual Phosphorus Ballistic Application 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    C. C. CHIAO and T. T. CHIAO, in “Handbook of Composites,” edited by G. Lubin (Van Nostrand Reinhold Company Inc., New York 1982) Chapter 12, p. 272.Google Scholar
  2. 2.
    E. ORNDOFF, Development and Evaluation of Polybenzoxazole Fibrous Structures; Technical Memorandum 104814; NASA, Lyndon B. Johnson Space Center, Houston, Texas (Sept. 1995).Google Scholar
  3. 3.
    H. VOGEL and C. S. MARVEL, J. of Pol. Sci. 50 (1961) 511.Google Scholar
  4. 4.
    H. VOGEL and C. S. MARVEL, J. of Pol. Sci. Part A: Polym. Chem. 34 (1996) 1125.CrossRefGoogle Scholar
  5. 5.
    G. A. SERAD, Journal of Polymer Science Part A: Polymer Chemistry 34 (1996) 1123.CrossRefGoogle Scholar
  6. 6.
    J. F. WOLFE and F. E. ARNOLD, Macromolecules 14 (1981) 909.CrossRefGoogle Scholar
  7. 7.
    Y.-H. SO, J. P. HEESCHEN, B. BELL, P. BONK, M. BRIGGS and R. DECAIRE, Macromolecules 31 (1998) 5229.CrossRefGoogle Scholar
  8. 8.
    E. ORNDOFF, S. CLARKE and R. DASGUPTA, PBO Fiber Blends: A Promise for the Future; MSC-22957; NASA, Lyndon, B. Johnson Space Center, Houston, Texas (2000) 77058.Google Scholar
  9. 9.
    P. M. CUNNIFF and M. A. AUERBACH, “23rd. Army Science Conference,” Assistant Secretary of the Army (Acquisition, Logistics and Technology), Orlando, Florida (D. 2002).Google Scholar
  10. 10.
    S. L. PHOENIX and P. K. PORWAL, Intern. J. Solids Struct. 40 (2003) 6723.CrossRefGoogle Scholar
  11. 11.
    G. LUBIN, “Handbook of Composites,” (Van Nostrand Reinhold Company Inc., New York, 1982) p. 19.CrossRefGoogle Scholar
  12. 12.
    J. F. WOLFE, B. H. LOO and F. E. ARNOLD, Macromolecules 14 (1981) 915.CrossRefGoogle Scholar
  13. 13.
    J. F. WOLFE, “Polybenzothiazoles and Polybenzoxazoles in,” edited by H. F. Mark, N. M. Bikales, C. G. Overberger, G. Menges, and J. I. Kroschwitz, (John Wiley & Sons, New York, 1988) Vol. 11, p. 601.Google Scholar
  14. 14.
    Y.-H. SO, J. P. HEESCHEN and C. L. MURLICK, J. Org. Chem. 28 (1995) 7289.Google Scholar
  15. 15.
    Y.-H. SO and J. P. HEESCHEN, Journal of Organic Chemistry 62 (1997) 3552.CrossRefGoogle Scholar
  16. 16.
    Y.-H. SO, Progr. Polym. Sci. 25 (2000) 137.CrossRefGoogle Scholar
  17. 17.
    E. W. CHOE and S. N. KIM, Macromolecules 14 (1981) 920.CrossRefGoogle Scholar
  18. 18.
    D. B. COTTS and G. C. BERRY, Macromolecules 14 (1981) 930.CrossRefGoogle Scholar
  19. 19.
    A. BUCKLEY, D. E. STUETZ and G. A. SERAD, in “Polybenzimidazoles,” edited by H. F. Mark, N. M. Bikales, C. G. Overberger, G. Menges and J. I. Kroschwitz (John Wiley & Sons, New York, 1988) Vol. 11, p. 572.Google Scholar
  20. 20.
    D. J. SIKKEMA, Polymer 39 (1998) 5981.CrossRefGoogle Scholar
  21. 21.
    L.-S. TAN, F. E. ARNOLD, T. D. DANG, H. H. CHUAH and K. H. WEI, Polymer 35 (1994) 3091.CrossRefGoogle Scholar
  22. 22.
    J. PRESTON, in “Polyamides, Aromatic,” edited by, H. F. Mark, N. M. Bikales, C. G. Overberger, G. Menges, and J. I. Kroschwitz, (John Wiley & Sons, New York, 1988) Vol. 11, p. 381.Google Scholar
  23. 23.
    D. TANNER, J. A. FITZGERALD, P. G. RIEWALD and W. F. KNOFF, in “Aramid Structure/Property Relationships and their Role in Applications Development,” edited by, M. Lewin, and J. Preston, (Marcel Dekker, Inc., New York, III Part B 1989) p. 35.Google Scholar
  24. 24.
    M. A. PHILLIPS, J. Chem. Soc., (1930) 2685.Google Scholar
  25. 25.
    P. F. JACKSON, K. J. MORGAN and A. M. TURNER, J. the Chem. Soc. Perkin Trans. II 11 (1972) 1582.Google Scholar
  26. 26.
    R. B. MARTIN and A. PARCELL, J. the Amer. Chem. Soc. 83 (1961) 4835.CrossRefGoogle Scholar
  27. 27.
    G. L. SCHMIR, Journal of the American Chemical Society 87 (1965) 2743.CrossRefGoogle Scholar
  28. 28.
    M. J. S. DEWAR, A. J. HARGET and N. TRINAJSTIC, Journal of the American Chemical Society 91 (1969) 6321.CrossRefGoogle Scholar
  29. 29.
    S. SKRAUP and M. MOSER, Berichte (1922) 1080.Google Scholar
  30. 30.
    N. WERSTIUK and J. CHEN, Canadian J. Chem. 67 (1989) 812.CrossRefGoogle Scholar
  31. 31.
    J. MARCH, in “Advanced Organic Chemistry: Reactions, Mechanisms, and Structure,” (John Wiley & Sons, New York, 1992) p. 383.Google Scholar
  32. 32.
    Y.-H. SO, S. J. MARTIN, K. OWEN, P. B. SMITH and C. L. KARAS, J. Polym. Sci. Part A: Polym. Chem. 37 (1999) 2637.CrossRefGoogle Scholar
  33. 33.
    T. KITAGAWA and K. YABUKI, J. Appl. Polym. Sci., 80 (2001) 1030.CrossRefGoogle Scholar
  34. 34.
    S. BOURBIGOT, X. FLAMBARD and S. DUQUESNE, Polym. Intern. 50 (2001) 157.CrossRefGoogle Scholar
  35. 35.
    L. C. E. STRUIK, in “Physical Aging in Amorphous Polymers and Other Materials,” (Elsevier Science Ltd, New York, 1978).Google Scholar
  36. 36.
    T. KITAGAWA, K. YABUKI and R. J. YOUNG, Polymer 42 (2001) 2101.CrossRefGoogle Scholar
  37. 37.
    L. PENN and F. MILANOVICH, Polymer 20 (1979) 31.CrossRefGoogle Scholar
  38. 38.
    P. H. KASAI and D. MCLEOD JR, J. Amer. Chem. Soc. 95 (1973) 4801.CrossRefGoogle Scholar
  39. 39.
    K. H. GRELLMANN and E. TAUER, Tetrahed. Lett. 4 (1974) 375.CrossRefGoogle Scholar
  40. 40.
    J. ROUSSILHE, B. DESPAX, A. LOPEZ and N. PAILLOUS, J. Chem. Soc. Chem. Commun. 7 (1982) 380.Google Scholar
  41. 41.
    C. M. KNOWLES and G. W. WATT, J. Org. Chem. 7 (1942) 56.CrossRefGoogle Scholar
  42. 42.
    K. RESZKA and C. F. CHIGNELL, Photochem. and Photobiol. 38 (1983) 281.CrossRefGoogle Scholar
  43. 43.
    K. RESZKA, R. D. HALL and C. F. CHIGNELL, Photochem. and Photobiol. 40 (1984) 707.CrossRefGoogle Scholar

Copyright information

© Springer Science + Business Media, Inc. 2006

Authors and Affiliations

  1. 1.National Institute of Standards and Technology, Polymers DivisionCharacterization and Measurement GroupGaithersburg
  2. 2.Electronics and Electrical Engineering Laboratory OfficeGaithersburg

Personalised recommendations