Advertisement

Journal of Intelligent & Robotic Systems

, Volume 93, Issue 1–2, pp 85–100 | Cite as

Automatic Control for Aerobatic Maneuvering of Agile Fixed-Wing UAVs

  • Eitan BulkaEmail author
  • Meyer Nahon
Article
  • 267 Downloads

Abstract

The use of unmanned aerial vehicles (UAVs) has become ubiquitous in a broadening range of applications, including many civilian uses. UAVs are typically categorized into two categories: conventional fixed-wing aircraft, which are associated with efficient flight over long distances, and rotor-craft, which are associated with short flights requiring maneuverability. An emerging class of UAVs, agile fixed-wing UAVs, are bridging the gap between fixed-wing and rotor-craft with efficient and maneuverable flight capabilities. This article presents a single physics-based controller capable of aerobatic maneuvering of agile fixed-wing UAVs. We first demonstrate autonomous flight in a conventional high-fidelity in-house simulation with this controller, and then implement the algorithm on a Pixhawk micro-controller. A hardware-in-the-loop (HIL) environment is developed and used to further develop autonomous aerobatic flight, followed by outdoor flight tests in windy conditions. Our control system successfully tracks position and orientation times histories to achieve autonomous extreme aerobatic maneuvers including knife-edge, rolling Harrier, hover, and aggressive turnaround.

Keywords

Control architectures Agile Fixed-Wing UAVs Aerobatics Unmanned aerial vehicles 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

Acknowledgments

A short version of this paper was presented in ICUAS 2017 [16]. The authors thank Michael Verrecchia for flight testing assistance and Waqas Khan for providing the agile aircraft dynamics model.

Supplementary material

(MP4 65.1 MB)

References

  1. 1.
    Gavrilets, V., Mettler, B., Feron, E.: Human-inspired control logic for automated maneuvering of miniature helicopter. J. Guid. Control. Dyn. 27, 752–759 (2004)CrossRefGoogle Scholar
  2. 2.
    Abbeel, P., Coates, A., Quigley, M., Ng, A.Y.: An application of reinforcement learning to aerobatic helicopter flight. In: Schölkopf, P.B., Platt, J.C., Hoffman, T. (eds.) Advances in neural information processing systems 19, pp 1–8. MIT Press, Cambridge (2007)Google Scholar
  3. 3.
    Mellinger, D., Michael, N., Kumar, V.: Trajectory generation and control for precise aggressive maneuvers with quadrotors. Int. J. Robot. Res. 31, 664–674 (2012)CrossRefGoogle Scholar
  4. 4.
    Green, W.E., Oh, P.Y.: A Hybrid MAV for Ingress and Egress of Urban Environments. IEEE Trans. Robot. 25, 253–263 (2009)CrossRefGoogle Scholar
  5. 5.
    Sobolic, F.M.: Agile flight control techniques for a fixed-wing aircraft. Thesis Massachusetts Institute of Technology (2009)Google Scholar
  6. 6.
    Moore, J., Cory, R., Tedrake, R.: Robust post-stall perching with a simple fixed-wing glider using LQR-Trees, vol. 9 (2014)Google Scholar
  7. 7.
    Ure, N., Inalhan, G.: Autonomous control of unmanned combat air vehicles: design of a multimodal control and flight planning framework for agile maneuvering. IEEE Control. Syst. 32(5), 74–95 (2012)MathSciNetCrossRefzbMATHGoogle Scholar
  8. 8.
    Hall, J.K., McLain, T.W.: Aerobatic maneuvering of miniature air vehicles using attitude trajectories. In: AIAA guidance, navigation and control conference and exhibit American institute of aeronautics and astronautics Inc. (2008)Google Scholar
  9. 9.
    Park, S.: Autonomous aerobatics on commanded path. Aerosp. Sci. Technol. 22(1), 64–74 (2012)CrossRefGoogle Scholar
  10. 10.
    Barry, A.J., Jenks, T., Majumdar, A., Lin, H.T., Ros, I.G., Biewener, A.A., Tedrake, R.: Flying between obstacles with an autonomous knife-edge maneuver. In: 2014 IEEE, international conference on robotics and automation (ICRA), pp 2559–2559 (2014)Google Scholar
  11. 11.
    Etkin, B.: Dynamics of flight: stability and control. Wiley, Australia, Limited (1982)Google Scholar
  12. 12.
    Khan, W.: Dynamics modeling of agile fixed-wing unmanned aerial vehicles. PhD Thesis, McGill University, Montreal (2016)Google Scholar
  13. 13.
    McCormick, B.: Aerodynamics, aeronautics, and flight mechanics, 2nd edn. Wiley, Hoboken (1995)Google Scholar
  14. 14.
    Khan, W., Nahon, M.: A propeller model for general forward flight conditions. International Journal of Intelligent Unmanned Systems 3, 72–92 (2015)CrossRefGoogle Scholar
  15. 15.
    Levin, J.M., Paranjape, A., Nahon, M.: Agile fixed-wing UAV, motion planning with knife-edge maneuvers. In: 2017 international conference on unmanned aircraft systems (ICUAS), pp 114–123 (2017)Google Scholar
  16. 16.
    Bulka, E., Nahon, M.: Autonomous control of agile fixed-wing UAVs, performing aerobatic maneuvers. In: 2017 international conference on unmanned aircraft systems (ICUAS), pp 104–113 (2017)Google Scholar
  17. 17.
    Khan, W., Nahon, M.: Modeling dynamics of agile fixed-wing UAVs, for real-time applications. In: 2016 international conference on unmanned aircraft systems (ICUAS), pp 1303–1312 (2016)Google Scholar
  18. 18.
    Khan, W., Nahon, M.: Real-time modeling of agile fixed-wing UAV, aerodynamics. In: 2015 international conference on unmanned aircraft systems (ICUAS), pp 1188–1195 (2015)Google Scholar
  19. 19.
    Khan, W., Nahon, M.: Toward an accurate Physics-Based UAV thruster model. IEEE/ASME Trans. Mechatron. 18, 1269–1279 (2013)CrossRefGoogle Scholar
  20. 20.
    Khan, W., Nahon, M.: Development and validation of a propeller slipstream model for unmanned aerial vehicles. J. Aircr. 52(6), 1985–1994 (2015)CrossRefGoogle Scholar
  21. 21.
  22. 22.
    Bulka, E., Nahon, M.: Autonomous fixed-wing aerobatics: from theory to flight. In: Accepted to 2018 IEEE international conference of robotics and automation (ICRA) (2018)Google Scholar
  23. 23.
    Environment and Climate Change Canada, Hourly Data Report for September 12, 2017, http://climate.weather.gc.ca/historical_data/search_historic_data_e.html. Accessed 8 Feb 2018

Copyright information

© Springer Nature B.V. 2018

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringMcGill UniversityMontrealCanada

Personalised recommendations