Advertisement

Glass and Ceramics

, Volume 76, Issue 1–2, pp 22–26 | Cite as

Tribological Characteristics of Metal-Oxide and Hybrid Composite Coatings

  • V. D. Skopintsev
  • E. G. VinokurovEmail author
COATINGS
  • 1 Downloads

It is shown that the tribological characteristics of structural steels under different conditions of rubbing can be significantly increased by depositing a layer of composite chemical coatings with nickel-phosphorus alloy with inclusions of disperse particles of the chromium, aluminum, titanium, and zirconium oxides as well as boron carbide, titanium nitride, diamond, and copper phthalocyanine. The influence of the nature, size, and content of disperse particles in composite coatings on the wear resistance of the tribo-contact was studied. The optimal conditions for depositing composite coatings with heightened wear resistance were determined.

Key words

composite coatings oxides alloy nickel-phosphorus-copper friction wear resistance hybrid coatings copper phthalocyanine 

Notes

This investigation was supported by an RNF grant (project No. 19-13-00254) for hydride composite materials, RBRF grant No. 19-03-00829, and the Ministry of Education and Science as part of the fulfillment of the base part of the government task No. 10.4556.2017/6.7.

References

  1. 1.
    R. S. Saifullin, Inorganic Composite Materials [in Russian], Khimiya, Moscow (1983), pp. 141 – 143, 244.Google Scholar
  2. 2.
    V. P. Perevalov, E. G. Vinokurov, K. V. Zuev, et al., “Modification and application of metal phthalocyanines in heterogeneous systems,” Protection Metals Phys. Chem. Surf., 53(2), 199 – 214 (2017), DOI:  https://doi.org/10.1134/S2070205117020186.CrossRefGoogle Scholar
  3. 3.
    V. D. Skopintsev, A. V. Karelin, I. O. Kotov, and G. D. Klinskii, “Physical mechanical and corrosion properties of chemical composite coatings,” Galvanotekhnika Obrab. Pov-sti, 6(3), 86 – 91 (1998).Google Scholar
  4. 4.
    M. B. Gokzhaev, A. V. Morgunov, and V. D. Skopintsev, “Optimizing solution composition for the chemical deposition of nickel-copper-phosphorus alloys,” Inorg. Mater., 44(12), 1319 – 1321 (2008), DOI:  https://doi.org/10.1134/S0020168508120108.CrossRefGoogle Scholar
  5. 5.
    E. G. Vinokurov, F. N. Zhigunov, A. V. Morgunov, and V. D. Skopintsev, “Deposition of chemical Coatings nickel-phosphorus and nickel-phosphorus-copper from glycinate solutions,” Galvanotekhnika Obrab. Pov-sti, 23(3), 40 – 46 (2015).Google Scholar
  6. 6.
    K. V. Zuev, V. P. Perevalov, E. G. Vinokurov, et al., “Physical-chemical properties of modified copper phthalocyanine and its water dispersions,” Makrogeterotsikly, 9(3), 250 – 256 (2016), DOI:  https://doi.org/10.6060/mhc160212z.Google Scholar
  7. 7.
    K. V. Zuev, V. A. Smrchek, M. S. Fedoseeva, et al., “Effect of chemical modification of the surface of phthalocyanine pigment on its properties,” Khim. Prom-st’ Segodnya, No. 8, 24 – 30 (2015).Google Scholar
  8. 8.
    E. G. Vinokurov, A. G. Muradova, K. V. Zuev, et al., “Electrokinetic properties of metal phthalocyanine nanoparticles,” Protection Metals Phys. Chem. Surf., 53(5), 847 – 849 (2017), DOI:  https://doi.org/10.1134/S2070205117050264.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.D. I. Mendeleev University of Chemical Technology of Russia (RKhTU)MoscowRussia
  2. 2.A. I. Evdokimov Moscow State Medical and Dental UniversityMoscowRussia

Personalised recommendations