Advertisement

Glass and Ceramics

, Volume 75, Issue 9–10, pp 391–393 | Cite as

Optimal Fractional Composition of Batch for Synthesis of Foam-Glass Materials Based on Diatomite from the Chernoyarskoe Deposit

  • E. A. YatsenkoEmail author
  • V. A. Smolii
  • B. M. Gol’tsman
  • A. V. Ryabova
  • L. V. Klimova
  • N. S. Gol’tsman
Article
  • 40 Downloads

The types and function of foam glass are examined as a function of the employed foaming agents. Mixes with different granulometric composition of the batch were developed and subjected to heat-treatment. The influence of the fractional composition of the foam-glass batch on the density and volume of the foam glass and foam-glass materials was studied.

Key words

foam glass foam-glass materials granulometric composition fractional composition foaming agents 

Notes

This work was performed at YuRGPU (NPI) with financial support from the Russian Science Foundation under contract No. 18-19-00455 ‘Development of a technology for comprehensive protection of oil and gas pipelines operated in the Far East of Russia’ (E. A. Yatsenko, lead researcher), item ‘Investigation of the particulars of foaming of compositions based on the chosen raw materials taking account of their chemical, granulometric, and phase compositions. Development of the optimal composition of batch for the synthesis of foam-glass materials based on local raw materials.’

References

  1. 1.
    A. S. Kosarev, V. A. Smolii, B. A. Yatsenko, and B. M. Goltsman, “Technological particulars of obtaining cellular glass used as a heat-insulating layer in silicate multi-layer composite heat-insulating and decorative material,” Tekh. Tekhnol. Silikatov, No. 4, 2 – 7 (2016).Google Scholar
  2. 2.
    V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Influence of ash-slag materials on temperature-time parameters of the synthesis of a heat-insulating silicate material,” Tekh. Tekhnol. Silikatov, No. 4, 25 – 29 (2016).Google Scholar
  3. 3.
    V. A. Smolii, E. A. Yatsenko, A. S. Kosarev, and L. V. Klimova, “Study of the spectrophotometric characteristics of a decorative layer of a multi-layer silicate composite heat-insulation material,” Tekh. Tekhnol. Silikatov, No. 4, 23 – 28 (2017).Google Scholar
  4. 4.
    V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Dependence of the heat-insulating and strength properties of lightweight concrete on the fractional composition of the porous aggregate,” Ékol. Prom. Proiz-va, No. 4, 13 – 15 (2017).Google Scholar
  5. 5.
    E. A. Yatsenko, A. P. Zubekhin, V. A. Smolii, et al., “Resource-conserving technology of heat-insulation-decorative glass-composite material based on ash-slag wastes,” Steklo Keram., No. 6, 34 – 38 (2015); E. A. Yatsenko, A. P. Zubekhin, V. A. Smolii, et al., “Resource-conserving technology of heat-insulation-decorative glass-composite material based on ash-slag wastes,” Glass Ceram., 72(5 – 6), 216 – 219 (2015).Google Scholar
  6. 6.
    V. A. Smolii, A. S. Kosarev, E. A. Yatsenko, and B. M. Goltsman, “Development of a production technology for an efficient energy-saving cellular heat-insulating building glass material,” in: Izv. Vyssh. Ucheb. Zaved., Severo-Kavkaz. Region, Ser. Tekh. Nauki, No. 4 (185), 128 – 132 (2015).Google Scholar
  7. 7.
    E. A. Yatsenko, V. A. Smolii, B. M. Goltsman, and A. S. Kosarev, “Study of macro- and microstructures of foam glass based on TPP slag waste,” Izv. Vyssh. Ucheb. Zaved., Severo-Kavkaz. Region, Ser. Tekh. Nauki, No. 6, 127 – 130 (2012).Google Scholar
  8. 8.
    V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Influence of granulometric composition of batch on technological and physical-chemical properties of granular porous silicate aggregate,” Steklo Keram., No. 8, 12 – 15 (2017); V. A. Smolii, E. A. Yatsenko, B. M. Goltsman, and A. S. Kosarev, “Influence of granulometric composition of batch on technological and physical-chemical properties of granular porous silicate aggregate,” Glass Ceram., 74(7 – 8), 270 – 273 (2017).Google Scholar
  9. 9.
    V. A. Smolii, E. A. Yatsenko, A. S. Kosarev, and B. M. Goltsman, “Dependence of the formation rate of the porous structure of the heat-insulating silicate material on the content of ash and slag waste,” Ékol. Prom. Proiz-va, No. 3, 2 – 5 (2016).Google Scholar
  10. 10.
    E. A. Yatsenko, A. P. Zubekhin, B. M. Goltsman, et al., “Investigation of factors affecting the properties and structure of foam glass and glass,” Steklo Keram., No. 4, 3 – 6 (2014); E. A. Yatsenko, A. P. Zubekhin, B. M. Goltsman, et al., “Investigation of factors affecting the properties and structure of foam glass and glass,” Glass Ceram., 71(3 – 4), 111 – 114 (2014).Google Scholar
  11. 11.
    A. P. Zubekhin, S. P. Golovanova, E. A. Yatsenko, et al., Fundamentals of the Technology of Refractory Non-Metallic and Silicate Materials [in Russian], KARTEK, Moscow (2010).Google Scholar
  12. 12.
    V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of the porous structure in foam glass,” Steklo Keram., No. 3, 14 – 17 (2002); V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of the porous structure in foam glass,” Glass Ceram., 59(3 – 4), 89 – 93 (2002).Google Scholar
  13. 13.
    N. I. Minko, O. V. Puchka, E. I. Evtushenko, et al., “Foam glass: a modern efficient inorganic heat-insulation material,” Fundam. Issled., No. 6, 849 – 854 (2013).Google Scholar
  14. 14.
    V. S. Bessmertnyi, O. V. Puchka, V. B. Krakht, et al., “Foam glass with a protective-decorative coating,” Sovr. Probl. Nauki obraz., No. 1 (2009); URL: http://science-education.ru/ru/article/view?id=1676
  15. 15.
    P. A. Ketov, “Development of environmentally safe energy-efficient building cellular material satisfying the principles of green construction,” Vest. MGSU, 13[3(114)], 368 – 377 (2018).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • E. A. Yatsenko
    • 1
    Email author
  • V. A. Smolii
    • 1
  • B. M. Gol’tsman
    • 1
  • A. V. Ryabova
    • 1
  • L. V. Klimova
    • 1
  • N. S. Gol’tsman
    • 1
  1. 1.M. I. Platov Southern Russia State Polytechnic University (NPI)NovocherkasskRussia

Personalised recommendations