Advertisement

Glass and Ceramics

, Volume 75, Issue 7–8, pp 303–307 | Cite as

Structure Formation in Cellular Glass Based on Novocherkassk CHPP Ash-Slag Wastes

  • V. A. SmoliiEmail author
  • A. S. Kosarev
  • E. A. Yatsenko
  • B. N. Gol’tsman
WASTES INTO PRODUCTION

The compositions and technological parameters for the synthesis of cellular glass based on the ash-slag wastes from the Novocherkassk CHPP (heat-insulation layer of a multilayer silicate composite heat-insulation-decorative material) have been developed. DTA, XPA, and electronic microscopy were used to determine the physical and chemical regularities of the high-temperature formation of the structure of a porous heat-insulation layer of a multilayer silicate composite heat-insulation-decorative material.

Key words

ash-slag wastes silicate heat-insulation materials cellular glass 

Notes

This work was performed at YURGU(NPI) with financial support from the FGBU ‘Russian foundation for fundamental research’ under contract No. 31 16-33-60136, dated December 2, 2015, according to the scientific project No. 16-33-60136 ‘Physical-chemical rules for obtaining silicate multi-layer composite heat-insulation-decorative material’ (V. A. Smolii, project leader).

References

  1. 1.
    A. S. Kosarev, V. A. Smolii, E. A. Yatsenko, and B. M. Gol’tsman, “Technological features of the production of cellular glass used as a heat-insulating layer in silicate multi-layer composite heat-insulating and decorative material,” Tekh. Tekhnol. Silikatov, No. 4, 2 – 7 (2016).Google Scholar
  2. 2.
    V. A. Smolii, E. A. Yatsenko, B. M. Gol’tsman, and A. S. Kosarev, “Influence of ash-slag materials on the temperature-time parameters of the synthesis of a heat-insulating silicate material,” Tekh. Tekhnol. Silikatov, No. 4, 25 – 29 (2016).Google Scholar
  3. 3.
    V. A. Smolii, E. A. Yatsenko, A. S. Kosarev, and L. V. Klimova, “Study of the spectrophotometric characteristics of a decorative layer of a multi-layer silicate composite heat-insulating-decorative material,” Tekh. Tekhnol. Silikatov, No. 4, 23 – 28 (2017)Google Scholar
  4. 4.
    V. A. Smolii, E. A. Yatsenko, B. M. Gol’tsman, and A. S. Kosarev, “Dependence of the heat-insulation and strength properties of lightweight concrete on the fractional composition of porous aggregate,” Ékol. Prom. Proizvod., No. 4, 13 – 15 (2017).Google Scholar
  5. 5.
    E. A. Yatsenko, A. P. Zubekhin, V. A. Smolii, et al., “Resourceconserving technology of heat-insulation-decorative glass-composite material based on ash-slag wastes,” Steklo Keram., No. 6, 34 – 38 (2015); E. A. Yatsenko, A. P. Zubekhin, V. A. Smolii, et al., “Resource-conserving technology of heat-insulation-decorative glass-composite material based on ash-slag wastes,” Glass Ceram., 72(5 – 6), 216 – 219 (2015).Google Scholar
  6. 6.
    V. A. Smolii, A. S. Kosarev, E. A. Yatsenko, and B. M. Gol’tsman, “Development of the production technology of efficient energy-saving cellular heat-insulating building glass material,” Izv. Vyssh. Uchebn. Zaved., Sev.-Kavkaz. Reg., Ser. Tekhnich. Nauki, No. 4(185), 128 – 132 (2015).Google Scholar
  7. 7.
    E. A. Yatsenko, V. A. Smolii, B. M. Gol’tsman, and A. S. Kosarev, “Study of macro- and microstructures of foam glass on the basis of TPP slag waste,” Izv. Vyssh. Uchebn. Zaved., Sev.-Kavkaz. Reg., Ser. Tekhnich. Nauki, No. 6, 127 – 130 (2012).Google Scholar
  8. 8.
    V. A. Smolii, E. A. Yatsenko, B. M. Gol’tsman, and A. S. Kosarev, “Influence of granulometric composition of batch on technological and physical-chemical properties of granular porous silicate aggregate,” Steklo Keram., No. 8, 12 – 15 (2017); A. Smolii, E. A. Yatsenko, B. M. Gol’tsman, and A. S. Kosarev, “Influence of granulometric composition of batch on technological and physical-chemical properties of granular porous silicate aggregate,” Glass Ceram., 74(7 – 8), 270 – 272 (2017).Google Scholar
  9. 9.
    V. A. Smolii, E. A. Yatsenko, A. S. Kosarev, and B. M. Gol’tsman, “Dependence of the rate of formation of the porous structure of an insulating silicate material on the content of ash-slag wastes,” Ékol. Prom. Proizvod., No. 3, 2 – 5 (2016).Google Scholar
  10. 10.
    E. A. Yatsenko, A. P. Zubekhin, B. M. Gol’tsman, et al., “Investigation of the factors influencing the properties and structure of foamed slag glass,” Steklo Keram., No. 4, 3 – 6 (2014); E. A. Yatsenko, A. P. Zubekhin, B. M. Gol’tsman, et al., “Investigation of the factors influencing the properties and structure of foamed slag glass,” Glass Ceram., 71(3 – 4), 111 – 114 (2014).Google Scholar
  11. 11.
    A. P. Zubekhin, S. P. Golovanova, E. A. Yatsenko, et al., Fundamentals of the Technology of Refractory Non-Metallic and Silicate Materials [in Russian], KARTÉK, Moscow (2010).Google Scholar
  12. 12.
    V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of the porous structure in foam glass,” Steklo Keram., No. 3, 14 – 17 (2002); V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of the porous structure in foam glass,” Glass Ceram., 59(3 – 4), 89 – 93 (2002).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. A. Smolii
    • 1
    Email author
  • A. S. Kosarev
    • 1
  • E. A. Yatsenko
    • 1
  • B. N. Gol’tsman
    • 1
  1. 1.M. I. Platov South-Russia State Polytechnic University (NPI)NovocherkasskRussia

Personalised recommendations