Glass and Ceramics

, Volume 74, Issue 11–12, pp 389–392 | Cite as

Comminution of Ceramic Production Wastes in a Vertical Centrifugal Mill

  • V. N. Khetagurov
  • M. V. Gegelashvili
  • E. S. Kamenetskii
  • D. V. Gorbachev
EQUIPMENT. WASTES INTO PRODUCTION
  • 10 Downloads

Comparative tests were performed of a vertical-type centrifugal mill for milling wastes from the production of ceramic articles: insulators and crushed mullite brick. It is shown that the use of a vertical centrifugal mill in the comminution of wastes from the production of ceramic articles increases the efficiency of waste processing.

Key words

ceramic articles production waste vertical centrifugal mill comminution granulometric composition 

References

  1. 1.
    S. A. Suvorov, V. N. Fishchev, and A. N. Ignat’eva, “Evolution of the structure of a composite material based on aluminum titanate and mullite,” Ogneup. Tekh. Keram., No. 3, 3 – 9 (2013).Google Scholar
  2. 2.
    S. A. Suvorov, V. N. Fishchev, A. V. Rusinov, and A. N. Ignat’eva, “Refractories based on aluminum titanate and waste processing sillimanite-group minerals,” Ogneup. Tekh. Keram., No. 7 – 8, 3 – 8 (2011).Google Scholar
  3. 3.
    V. M. Pavlovets, Refractories and Heat Insulating Materials [in Russian], SibGIU, Novokuznetsk (2015).Google Scholar
  4. 4.
    V. F. Baranov, “Review of the crushing and milling equipment used by the primary producers,” Obogashchenie Rud, No. 3 (2012).Google Scholar
  5. 5.
    V. F. Baranov, “On factories of the future,” Obogashchenie Rud, No. 5, 41 – 45 (2010).Google Scholar
  6. 6.
    V. N. Khetagurov, “A method of grinding materials, RF Pat. No. 2078613,” Byull. Izobr. Polezn. Modeli, No. 13 (1997).Google Scholar
  7. 7.
    V. N. Khetagurov, V. P. Il’yashik, and A. I. Chuzhinov, “Mill, RF Pat. No. 2084787,” Byull. Izobr. Polezn. Modeli, No. 20 (1997).Google Scholar
  8. 8.
    V. N. Khetagurov, Development and Design of Vertical-Type Centrifugal Mills [in Russian], Terek, Vladikavkaz (1999).Google Scholar
  9. 9.
    D. G. Minasyan, E. S. Kamenetskii, V. N. Khetagurov, and V. A. Pliev, “Height optimization of ring inserts in the working space of a vertical centrifugal mill,” Ustoich. Razv. Gorn. Terr., No. 2, 26 – 29 2014).Google Scholar
  10. 10.
    E. S. Kamianiec, D. G. Minassian, V. N. Khetagurov, and P. A. Skvortsov, “Effect of equivalent viscosity of comminuted material on the character of its motion in a centrifugal vertical mill,” Izv. Vysh. Uchebn. Zaved., Severo-Kavkaz. Reg., Tekh. Nauki, No. 1, 61 – 66 (2017).Google Scholar
  11. 11.
    V. N. Khetagurov, E. S. Kamenetskii, D. G. Minasyan, and M. V. Gegelashvili, “Investigation of the motion of comminuted material in a vertical centrifugal mill with a coaxial ring placed in its working space,” Ustoich. Razv. Gorn. Terr., No. 3, 287 – 294 (2017).Google Scholar
  12. 12.
    V. N. Khetagurov, E. S. Kameneskii, S. E. Sobolev, et al. “Effect of combined release comminuted matter from the working zone of a vertical centrifugal mill on the granulometric composition of the final product,” Gornyi Inf.-Analit. Byull. MGTU, No. 6, 287 – 291 (2014).Google Scholar
  13. 13.
    V. N. Khetagurov, E. S. Kamenetskii, and D. G. Minasyan, “Optimization of the design and operating regimes of vertical centrifugal mills,” Ustoich. Razv. Gorn. Terr., No. 1, 56 – 58 (2014).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • V. N. Khetagurov
    • 1
  • M. V. Gegelashvili
    • 1
  • E. S. Kamenetskii
    • 2
  • D. V. Gorbachev
    • 3
  1. 1.North Caucasus Mining and Metallurgical InstituteState Technological UniversityVladikavkazRussia
  2. 2.Southern Mathematical Institute, Affiliate of the Vladikavkaz Scientific Center of the Russian Academy SciencesVladikavkazRussia
  3. 3.KonBrio Technologies JSCKorolevRussia

Personalised recommendations