Advertisement

Numerical Calculation and Stability of the Yield and Enhanced Support Technology for Shaft

  • Weijian YuEmail author
  • Ze Liu
  • Baifu An
  • Fangfang Liu
  • Yunbo Wang
Original Paper
  • 6 Downloads

Abstract

This work study the auxiliary shaft in Jinchuan No. 3 mining area. A numerical calculation method is adopted in this study to optimize retention space to yield for the support of the shaft and to analyze the stability of the surrounding rock mass to solve the large deformation problem occurring in shaft excavation. Firstly, three different sections are investigated, including the shaft wellhead section, main body and cross-cut under the shaft. Support and reinforcement solutions based on the retention space to yield support technology of shaft are proposed twice to resolve the corresponding problems appearing during construction. The relationship between the thickness of the lining and the convergence of the lining, the thickness of the plastic zone and the maximum principal stress of the lining is then identified through a planar model analysis on the shaft cross-section with the depth of 250 m, 400 m, 500 m, and 650 m. Lastly, a three-dimensional numerical simulation and safety evaluation of the first support design (50 mm bolt–shotcrete mesh + 450 mm plain concrete), as well as a stability analysis on the adjusted support solution (50 mm bolt–shotcrete mesh + 750 mm plain concrete) for a stratum of poor conditions are carried out using software FLAC3D.

Keywords

Shaft engineering Support design The deformation of surrounding rock mass Numerical calculation Stability analysis 

Notes

Acknowledgements

This study was supported by the National Natural Science Foundation of China (51574122, 51804114), and the Research Fund of The State Key Laboratory Coal Resources and Safe Mining, CUMT(SKLCRSM18KF008).

References

  1. Agheshlui H, Goldsworthy H, Gad E, Fernando S (2016) Tensile behaviour of anchored blind bolts in concrete filled square hollow sections. Mater Struct 49(4):1511–1525Google Scholar
  2. Boon CW, Houlsby GT, Utili S (2015) Designing tunnel support in jointed rock masses via the dem. Rock Mech Rock Eng 48(2):603–632Google Scholar
  3. Galvin JM (2016) Ground engineering—principles and practices for underground coal mining. Springer, BerlinGoogle Scholar
  4. Hu XY, Yan QX, He C (2016) Type and application of inclined shaft supporting structure for laminated lining and compacted layer with gravel. J Rock Mech Eng 35(3):579–591Google Scholar
  5. Jiang L, Sainoki A, Mitri HS, Ma N, Liu H, Hao Z (2016) Influence of fracture-induced weakening on coal mine gateroad stability. Int J Rock Mech Min Sci 88:307–317Google Scholar
  6. Kang H, Wu Y, Gao F, Lin J, Jiang P (2013) Fracture characteristics in rock bolts in underground coal mine roadways. Int J Rock Mech Min Sci 62(5):105–112Google Scholar
  7. Li L, Jia QH (2015) Research and development of full hydraulic anchor cable drilling vehicle and industrial test. J Chin Coal 8:81–84Google Scholar
  8. Lian CJ, Xu WY, Wang YJ (2010) Numerical simulation of support performance of new high strength prestressed anchor roadway. J Geotech Mech 31(7):2329–2335Google Scholar
  9. Meng QB, Han LJ, Han DM (2018) Research on key technologies for project construction of very weak string lane. J Xi’an Univ Sci Technol 2:281–290Google Scholar
  10. Please CP, Mason DP, Khalique CM, Ngnotchouye JMT, Hutchinson AJ, Merwe JNVD (2013) Fracturing of an Euler–Bernoulli beam in coal mine pillar extraction. Int J Rock Mech Min Sci 64(12):132–138Google Scholar
  11. Schumacher FP, Kim E (2013) Modeling the pipe umbrella roof support system in a western us underground coal mine. Int J Rock Mech Min Sci 60(6):114–124Google Scholar
  12. Sun C (2013) Study on strain softening behavior of deep joint rock mass and interaction between surrounding rock and supporting structure. Liaoning University of Engineering and TechnologyGoogle Scholar
  13. Thompson AG, Villaescusa E (2014) Case studies of rock reinforcement components and systems testing. Rock Mech Rock Eng 47(5):1589–1602Google Scholar
  14. Wang M, Lu F (2015) Application of digging machine and its supporting equipment in non-coal mine mountains. J Min Technol 15(5):72–74Google Scholar
  15. Wang Q, Li SC, Li WT (2012) Coupling performance analysis and application of combinational components of box beam support system for impressed anchoring cable. J Rock Mech 33(11):3374–3384Google Scholar
  16. Wang Q, Li SC, Li WT (2013) A comparative study on the layout pattern of the inserted anchoring cable box beam support system in deep thick top coal roadway. J Rock Mech 34(3):842–848Google Scholar
  17. Wang F, Liu HT, Zhang SK (2014) High stress soft rock roadway can be connected with long anchor rod compressive support technology. J Geotech Eng 36(9):1666–1673Google Scholar
  18. Wang WJ, Yuan C, Yu WJ (2016) Retrospective deformation control technique for surrounding rock in deep high stress roadway. Coal J 41(9):2156–2164Google Scholar
  19. Yu WJ, Liu FF (2018) Stability of close chambers surrounding rock in deep and comprehensive control technology. Adv Civil Eng. Article ID 6275941Google Scholar
  20. Yu WJ, Gao Q, Zhao Y (2008) Optimization design and numerical analysis of unstable surrounding rock excavation and compressive support. Coal J 33(1):11–16Google Scholar
  21. Yu WJ, Wu GS, An BF (2018) Investigations of support failure and combined support for soft and fractured coal-rock tunnel in tectonic belt. Geotech Geol Eng 34:3911–3939Google Scholar
  22. Zhou LQ (2014) Research and application of key techniques for fast digging in large section coal lane. Inner Mongolia University of Science and TechnologyGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2019

Authors and Affiliations

  • Weijian Yu
    • 1
    • 3
    Email author
  • Ze Liu
    • 1
    • 3
  • Baifu An
    • 2
    • 3
  • Fangfang Liu
    • 1
    • 3
  • Yunbo Wang
    • 1
  1. 1.School of Resource & Environment and Safety EngineeringHunan University of Science and TechnologyXiangtanChina
  2. 2.State Key Laboratory of Coal Resources and Safe MiningChina University of Mining and TechnologyXuzhouChina
  3. 3.Work Safety Key Lab on Prevention and Control of Gas and Roof Disasters for Southern Coal MinesHunan University of Science and TechnologyXiangtanChina

Personalised recommendations