# Numerical Study of Damage Evolution Law of Coal Mine Roadway by Particle Flow Code (PFC) Model

• Wan-rong Liu
• Xiao Wang
• Chuan-ming Li
Original Paper

## Abstract

Deformation and destruction of roadway surrounding rock is one of the main causes of coal mine accidents. In this paper, the horseshoe-shaped roadway model was established by particle flow code firstly and then analyzed the roadway damage process through the contact force chain, deformation displacement and distribution of micro-cracks. The research result show that the parallel bond model can well simulate the damage process of the coal mine roadway. The surrounding rock can be divided into four zones from the roadway side to the deep rock mass. The micro-contact force chain is the force transmission path and the principal stress is the macroscopic reflection of the micro-contact force chain.

## Keywords

Roadway Particle flow code Surrounding rock Damage evolution

## Notes

### Acknowledgements

The research described in this paper were financially supported by the open fund of Key Laboratory of Safety and High-efficiency Coal Mining, Ministry of Education (Anhui Universit of Science and Technology) (No. JYBSYS2018205), Liaocheng University Research Fund (No. 318051703), National Natural Science Foundation of China (No. 51774009).

## References

1. An B, Tannant DD (2007) Discrete element method contact model for dynamic simulation of inelastic rock impact. Comput Geosci 33(4):513–521.
2. Cai M, Kaiser PK, Morioka H, Minami M, Maejima T, Tasaka Y et al (2007) FLAC/PFC coupled numerical simulation of AE in large-scale underground excavations. Int J Rock Mech Min Sci 44(4):550–564.
3. Cundall PA, Strack ODL (1979) A discrete numerical model for granular assemblies. Geotechnique 29(30):331–336. Google Scholar
4. Fakhimi A, Carvalho F, Ishida T, Labuz JF (2002) Simulation of failure around a circular opening in rock. Int J Rock Mech Min Sci 39(4):507–515.
5. Hui Z, Zhang C, Zhen L (2014) Analysis of mechanical behavior of soft rocks and stability control in deep tunnels. J Rock Mech Geotech Eng 6(3):219–226.
6. Itasca Consulting Group (2008) PFC2D (particle flow code in 2 dimensions) users guide. Itasca, MinneapolisGoogle Scholar
7. Kusui A, Villaescusa E, Funatsu T (2016) Mechanical behaviour of scaled-down unsupported tunnel walls in hard rock under high stress. Tunn Undergr Space Technol 60:30–40.
8. Li Y, Zhang D, Fang Q, Yu Q, Xia L (2014) A physical and numerical investigation of the failure mechanism of weak rocks surrounding tunnels. Comput Geotech 61(3):292–307.
9. Lu C, Tang C, Chan Y, Hu J, Chi C (2014) Forecasting landslide hazard by the 3D discrete element method: a case study of the unstable slope in the Lushan hot spring district, central Taiwan. Eng Geol 183(31):14–30.
10. Park KH, Kim YJ (2006) Analytical solution for a circular opening in an elastic–brittle–plastic rock. Int J Rock Mech Mining Sci 43(4):616–622.
11. Potyondy DO, Cundall PA (2004) A bonded-particle model for rock. Int J Rock Mech Min Sci 41:1329–1364.
12. Procházka PP (2004) Application of discrete element methods to fracture mechanics of rock bursts. Eng Fract Mech 71(4):601–618.
13. Wang X, Meng F (2018) Statistical analysis of large accidents in China’s coal mines in 2016. Nat Hazards 92(1):311–325.
14. Wang X, Tian L (2018) Mechanical and crack evolution characteristics of coal–rock under different fracture-hole conditions: a numerical study based on particle flow code. Environ Earth Sci 77(8):297.
15. Wang X, Wen Z, Jiang Y, Huang H (2018) Experimental study on mechanical and acoustic emission characteristics of rock-like material under non-uniformly distributed loads. Rock Mech Rock Eng 51(3):729–745.
16. Zhang Q, Wang X, Tian L et al (2018) Analysis of mechanical and acoustic emission characteristics of rock materials with double-hole defects based on particle flow code. Shock Vib, article number: 7065029.