Advertisement

Assessment of soil and groundwater contamination at a former Tannery district in Dhaka, Bangladesh

  • Md Shahin Alam
  • Bangshuai HanEmail author
  • Al-Mizan
  • John Pichtel
Original Research
  • 138 Downloads

Abstract

The uncontrolled and unplanned development of leather processing industries in Bangladesh has contaminated land and water, prompting concerns for public health. Hazaribagh, located in the southwestern part of Dhaka, has been the city’s principal leather processing zone since the 1960s. In order to alleviate the environmental contamination and public health risks to citizens of Hazaribagh and downstream, a relocation project was launched to remove the tanning industry. However, soil and groundwater quality conditions of the former industrial sites must be assessed and/or remediated for commercial and residential use. Soil was collected from ten sites and tested for concentrations of potentially toxic metals (Pb, Cr, Zn, Cu, Ni and Cd), and groundwater was collected from six sites and analyzed for physiochemical parameters and potentially toxic metals. Concentrations of soil Cr, Zn and Cu exceeded the European Union maximum permissible concentrations. Deep groundwater Cr concentration in one location exceeded the Bangladesh DoE maximum limits; however, deep groundwater is overall of good-to-excellent quality. Spatial variations of soil and groundwater contamination in Hazaribagh indicate that contaminants have not spread laterally. Based on local conditions, current technologies, contamination level, time and cost, and ease of operation, it is suggested that soil flushing, electrokinetics and/or phytoremediation could be options for remediation of affected soil and groundwater in the Hazaribagh district.

Keywords

Groundwater Soil Contamination Tannery Metal Public health Hazaribagh Chromium 

Notes

Acknowledgements

This work was made possible by the Ball State New Faculty Startup under fund number 120198, and the Ball State ASPiRE Graduate Student Research Support under award number A19-0319. This research was also supported by Professor Dr. Md. Delwar Hossain of Department of Civil Engineering, Bangladesh University of Engineering and Technology. The authors also want to thank two anonymous reviewers for their help in improving the manuscript.

References

  1. Aggarwal, A., Hoppe, M., & Walkenhorst, P. (2009). Special economic zones and economic diversification: Some evidence from South Asia. In R. Newfarmer, W. Shaw, & P. Walkenhorst (Eds.), Breaking into new markets (pp. 223–236). Washington, DC: World Bank.Google Scholar
  2. Ahmad, M. K., Islam, S., Rahman, M. S., Haque, M. R., & Islam, M. M. (2010). Metals in water, sediment and some fishes of Buriganga River, Bangladesh. International Journal of Environmental Research,4(2), 321–332.Google Scholar
  3. Alvarez-Bernal, D., Contreras-Ramos, S. M., Trujillo-Tapia, N., Olalde-Portugal, V., Frías-Hernández, J. T., & Dendooven, L. (2006). Effects of tanneries wastewater on chemical and biological soil characteristics. Applied Soil Ecology,33(3), 269–277.CrossRefGoogle Scholar
  4. Aravindhan, R., Madhan, B., Rao, J. R., Nair, B. U., & Ramasami, T. (2004). Bioaccumulation of chromium from tannery wastewater: An approach for chrome recovery and reuse. Environmental Science and Technology,38(1), 300–306.CrossRefGoogle Scholar
  5. Arias-Barreiro, C. R., Nishizaki, H., Okubo, K., Aoyama, I., & Mori, I. C. (2010). Ecotoxicological characterization of tannery wastewater in Dhaka, Bangladesh. Journal of environmental biology,31(4), 471–475.Google Scholar
  6. ASTM D4972-13. (2013). Standard test method for pH of soils. West Conshohocken, PA: ASTM International. www.astm.org. Last Retrieved 10-08-2019.
  7. Bangladesh Meteorological Department. (2019). http://bmd.gov.bd/. Last Retrieved 10-08-2019.
  8. Batabyal, A. K., & Chakraborty, S. (2015). Hydrogeochemistry and water quality index in the assessment of groundwater quality for drinking uses. Water Environment Research,87(7), 607–617.CrossRefGoogle Scholar
  9. Bhowmik, A. K. (2013). Industries’ location as jeopardy for sustainable urban development in Asia: A review of the Bangladesh leather processing industry relocation plan. Environment and Urbanization Asia,4(1), 93–119.CrossRefGoogle Scholar
  10. Chadha, D. K. (1999). A proposed new diagram for geochemical classification of natural waters and interpretation of chemical data. Hydrogeology Journal,7(5), 431–439.CrossRefGoogle Scholar
  11. Choppala, G., Bolan, N., & Park, J. H. (2013). Chromium contamination and its risk management in complex environmental settings. In Advances in agronomy (Vol. 120, pp. 129–172). Cambridge: Academic Press.  https://doi.org/10.1016/b978-0-12-407686-0.00002-6.Google Scholar
  12. Chu, G., Xiao, J., Zhang, Y., Dong, P., Nayaka, G. P., Meng, Q., et al. (2018). Multi-electrode system for electrokinetic remediation of paddy soil to remove toxic metals. International Journal of Electrochemical Science,13, 11335–11346.CrossRefGoogle Scholar
  13. Cude, C. G. (2001). Oregon water quality index a tool for evaluating water quality management effectiveness 1. JAWRA Journal of the American Water Resources Association,37(1), 125–137.CrossRefGoogle Scholar
  14. Dong, D., Zhao, X., Hua, X., Liu, J., & Gao, M. (2009). Investigation of the potential mobility of Pb, Cd and Cr(VI) from moderately contaminated farmland soil to groundwater in Northeast, China. Journal of Hazardous Materials,162(2–3), 1261–1268.CrossRefGoogle Scholar
  15. FAO. (1988). Land resources appraisal of Bangladesh for agricultural development (Vol. 2). Rome: FAO.Google Scholar
  16. Gebrekidan, A., Weldegebriel, Y., Hadera, A., & Van der Bruggen, B. (2013). Toxicological assessment of metals accumulated in vegetables and fruits grown in Ginfel River near Sheba Tannery, Tigray, Northern Ethiopia. Ecotoxicology and Environmental Safety,95, 171–178.CrossRefGoogle Scholar
  17. Halim, M. A., Sumayed, S. M., Majumder, R. K., Ahmed, N., Rabbani, A., & Karmaker, S. (2011). Study on groundwater, river water and tannery effluent quality in Southwestern Dhaka, Bangladesh: Insights from multivariate statistical analysis. Journal of Natural Science and Sustainable Technology,5(3), 125–147.Google Scholar
  18. Harkins, R. D. (1974). An objective water quality index. Journal of Water Pollution Control Federation,46, 588–591.Google Scholar
  19. Hashem, M. A., Tomal, M. N. A., & Mondal, B. K. (2015). Generation of fleshings at beamhouse in tannery and its environmental impact assessment: Bangladesh perspective. Bangladesh Journal of Scientific and Industrial Research,50(3), 227–232.CrossRefGoogle Scholar
  20. Hashim, M. A., Mukhopadhyay, S., Sahu, J. N., & Sengupta, B. (2011). Remediation technologies for metal contaminated groundwater. Journal of Environmental Management,92(10), 2355–2388.CrossRefGoogle Scholar
  21. Horton, R. K. (1965). An index number system for rating water quality. Journal of Water Pollution Control Federation,37(3), 300–306.Google Scholar
  22. Hossain, S. (2008). Rapid urban growth and poverty in Dhaka City. Bangladesh e-Journal of Sociology,5(1), 57–80.Google Scholar
  23. Huq, S. I. (1998). Critical environmental issues relating to tanning industries in Bangladesh. In R. Naidu, I. R. Willet, S. Mahimairaja, R. Kookana, & K. Ramasamy (Eds.), ACIAR proceedings (pp. 22–28). Coimbatore: ACIAR.Google Scholar
  24. Islam, M., Karim, M., Zheng, X., & Li, X. (2018). Metal and metalloid pollution of soil, water and foods in Bangladesh: A critical review. International Journal of Environmental Research and Public Health,15(12), 2825.CrossRefGoogle Scholar
  25. Jacobs, J. A., & Testa, S. M. (2005). Overview of chromium(VI) in the environment: Background and history. Chromium(VI) handbook (pp. 1–21). New York: CRC Press.Google Scholar
  26. Juel, M. A. I., Chowdhury, Z. U. M., Mizan, A., & Alam, M. S. (2016). Toxicity and environmental impact assessment of metals contaminated soil of Hazaribagh Tannery Area. In International conference on advances in civil engineering (pp. 21–23).Google Scholar
  27. Karn, S. K., & Harada, H. (2001). Surface water pollution in three urban territories of Nepal, India, and Bangladesh. Environmental Management,28(4), 483–496.CrossRefGoogle Scholar
  28. Lombi, E., & Hamon, R. E. (2005). Remediation of polluted soils. In D. Hillel (Ed.), Encyclopedia of soils in the environment (pp. 379–385). Amsterdam: Elsevier.  https://doi.org/10.1016/b0-12-348530-4/00087-4.CrossRefGoogle Scholar
  29. Maier, J., Kandelbauer, A., Erlacher, A., Cavaco-Paulo, A., & Gubits, G. M. (2004). A new alkali-thermostable azoreductase from Bacillus sp. strain SF. Applied Environmental Microbiology,70, 837–844.  https://doi.org/10.1128/AEM.70.2.837-844.2004.CrossRefGoogle Scholar
  30. Mondol, M., Asia, A., Chamon, A., & Faiz, S. (2017). Contamination of soil and plant by the Hazribagh tannery industries. Journal of the Asiatic Society of Bangladesh, Science,43(2), 207–222.Google Scholar
  31. Namaghi, H. H., Karami, G. H., & Saadat, S. (2011). A study on chemical properties of groundwater and soil in ophiolitic rocks in Firuzabad, east of Shahrood, Iran: With emphasis to metal contamination. Environmental Monitoring and Assessment,174(1–4), 573–583.CrossRefGoogle Scholar
  32. Pichtel, J. (2019). Fundamentals of site remediation: For metal- and hydrocarbon-contaminated soils (3rd ed.). Rockville, MD: Government Institutes.Google Scholar
  33. Rafati, M., Khorasani, N., Moattar, F., Shirvany, A., Moraghebi, F., & Hosseinzadeh, S. (2011). Phytoremediation potential of Populus alba and Morus alba for cadmium, chromium and nickel absorption from polluted soil. International Journal of Environmental Research,5(4), 961–970.Google Scholar
  34. Rayment, G. E., & Higginson, F. R. (1992). Australian laboratory handbook of soil and water chemical methods. Port Melbourne: Reed International Books Australia P/L, Trading as Inkata Press.Google Scholar
  35. Reddy, K. R., & Al-Hamdan, A. Z. (2013). Enhanced sequential flushing process for removal of mixed contaminants from soils. Water, Air, and Soil Pollution,224(12), 1709.CrossRefGoogle Scholar
  36. Rew, A. (2007). Phytoremediation: An environmentally sound technology for pollution prevention, control and remediation in developing countries. Educational Research and Reviews,2(7), 151–156.Google Scholar
  37. Shakir, L., Ejaz, S., Ashraf, M., Qureshi, N. A., Anjum, A. A., Iltaf, I., et al. (2012). Ecotoxicological risks associated with tannery effluent wastewater. Environmental Toxicology and Pharmacology,34(2), 180–191.CrossRefGoogle Scholar
  38. Sherene, T. (2010). Mobility and transport of metals in polluted soil environment. Biological Forum: An International Journal,2(2), 112–121.Google Scholar
  39. Tchounwou, P. B., Yedjou, C. G., Patlolla, A. K., & Sutton, D. J. (2012). Metal toxicity and the environment. In A. Luch (Ed.), Molecular, clinical and environmental toxicology (pp. 133–164). Basel: Springer.CrossRefGoogle Scholar
  40. Tyagi, S., Sharma, B., Singh, P., & Dobhal, R. (2013). Water quality assessment in terms of water quality index. American Journal of Water Resources,1(3), 34–38.Google Scholar
  41. Wuana, R. A., & Okieimen, F. E. (2011). Metals in contaminated soils: A review of sources, chemistry, risks and best available strategies for remediation. Isrn Ecology, 2011, 1–20.Google Scholar
  42. Zahid, A., Balke, K. D., Hassan, M. Q., & Flegr, M. (2006). Evaluation of aquifer environment under Hazaribagh leather processing zone of Dhaka city. Environmental Geology,50(4), 495–504.CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Ball State University, Environment, Geology and Natural ResourcesMuncieUSA
  2. 2.Leather EngineeringKhulna University of Engineering and Technology (KUET)KhulnaBangladesh

Personalised recommendations