A two-dimensional deterministic particle tracking model, in which the anisotropic-dispersive process is described by a particle strength exchange scheme, is established for the simulation of pollutant transport in vertically well-mixed rivers and estuaries. By simulating two benchmark problems with analytic solutions, the PSE scheme is shown to be accurate even if the anisotropic ratio of dispersion coefficients is very high. Further simulations of two specific problems concerning the optimal effluent discharge location and procedure are presented. The major conclusion is that in a tidal estuary with a relatively large fresh-water flow, setting the discharge position at the mixing center and making the discharge rate proportional to flow speed may minimize the peaks of concentration.
Dispersion Estuary Particle methods Particle strength exchange High anisotropy ratio
This is a preview of subscription content, log in to check access
This work was supported by the Ministry of Science and Technology of the Republic of China, Taiwan, under Contract No. NSC 101-2221-E-033-078.
Boxall JB, Guymer I (2003) Analysis and prediction of transverse mixing coefficients in natural channels. J Hydraul Eng 129(2):129–139CrossRefGoogle Scholar
Chang KH, Lin MY, Huang LH (2014) Modified Lagrangian vortex method with improved boundary conditions for water waves past a thin bottom-standing barrier. Int J Numer Methods Fluids 77(4):183–205CrossRefGoogle Scholar