Advertisement

Cellulose

, Volume 26, Issue 5, pp 3503–3512 | Cite as

One-step deposition of hydrophobic coatings on paper for printed-electronics applications

  • Zehra Gozutok
  • Omer Kinj
  • Ilker Torun
  • Ahmet Turan OzdemirEmail author
  • Mustafa Serdar OnsesEmail author
Original Research
  • 126 Downloads

Abstract

The ability to pattern highly conductive features on paper substrates is critically important for applications in radio frequency identification (RFID) tags, displays, sensors, printed electronics, and diagnostics. Ink-jet printing particle-free reactive silver inks is an additive, material efficient and versatile strategy for fabrication of highly conductive patterns; however, the intrinsic wetting properties of cellulose based papers are not suitable to serve as substrates for this process. This study reports one-step and practical modification of the surface of paper substrates using industrially available materials. The paper substrates were dip-coated with films of hydrocarbon and fluorocarbon based polymeric resins. Ink-jet printing particle-free reactive silver inks on the modified paper substrates followed by fast thermal annealing resulted in highly conductive patterns. The coatings improved the conductivity of the patterns and reduced the number of printing layers required to obtain conductivity. We finally demonstrated fabrication of a printed RFID tag on the coated paper substrates operating at the frequency range of 865–870 MHz.

Graphical abstract

Keywords

Printed electronics Paper Surface modification Nanoparticles Silver 

Notes

Acknowledgments

This work was supported by the Research Fund of the Erciyes University (Project No. FBA-2018-8366). MSO acknowledges partial support from the Turkish Academy of Sciences Distinguished Young Scientist Award (TUBA-GEBIP). Water repellant resins were kindly supported by SPOT Chemical Industry and Trade Inc.

Supplementary material

10570_2019_2326_MOESM1_ESM.docx (880 kb)
Supplementary material 1 (DOCX 881 kb)

References

  1. Allen ML, Aronniemi M, Mattila T, Alastalo A, Ojanperä K, Suhonen M, Seppä H (2008) Electrical sintering of nanoparticle structures. Nanotechnology 19:175201CrossRefGoogle Scholar
  2. Andersson P et al (2002) Active matrix displays based on all-organic electrochemical smart pixels printed on paper. Adv Mater 14:1460–1464CrossRefGoogle Scholar
  3. Balu B, Breedveld V, Hess DW (2008) Fabrication of “roll-off” and “sticky” superhydrophobic cellulose surfaces via plasma processing. Langmuir 24:4785–4790CrossRefGoogle Scholar
  4. Cao R, Zhang X, Tan W, Shen W (2018) Precipitation assay meets low wettability on paper: a simple approach for fabricating patterned paper sensors. Cellulose 25:583–592CrossRefGoogle Scholar
  5. Chang J-K, Fang H, Bower CA, Song E, Yu X, Rogers JA (2017) Materials and processing approaches for foundry-compatible transient electronics. Proc Natl Acad Sci 114:E5522–E5529CrossRefGoogle Scholar
  6. Glavan AC et al (2014) Omniphobic “R-F paper” produced by silanization of paper with fluoroalkyltrichlorosilanes. Adv Funct Mater 24:60–70CrossRefGoogle Scholar
  7. Harrington RF (1960) Effect of antenna size on gain, bandwidth, and efficiency. J Res Natl Bur Stand 64:1–12Google Scholar
  8. Jabbour L, Bongiovanni R, Chaussy D, Gerbaldi C, Beneventi D (2013) Cellulose-based Li-ion batteries: a review. Cellulose 20:1523–1545CrossRefGoogle Scholar
  9. Kamyshny A, Magdassi S (2014) Conductive nanomaterials for printed electronics. Small 10:3515–3535CrossRefGoogle Scholar
  10. Kim D-H, Lu N, Ghaffari R, Rogers JA (2012) Inorganic semiconductor nanomaterials for flexible and stretchable bio-integrated electronics. NPG Asia Mater 4:e15CrossRefGoogle Scholar
  11. Kota AK, Kwon G, Tuteja A (2014) The design and applications of superomniphobic surfaces. NPG Asia Mater 6:e109CrossRefGoogle Scholar
  12. Lee S, Seong H, Im SG, Moon H, Yoo S (2017) Organic flash memory on various flexible substrates for foldable and disposable electronics. Nat Commun 8:725CrossRefGoogle Scholar
  13. Lessing J, Glavan AC, Walker SB, Keplinger C, Lewis JA, Whitesides GM (2014) Inkjet printing of conductive inks with high lateral resolution on omniphobic “Rf paper” for paper-based electronics and MEMS. Adv Mater 26:4677–4682CrossRefGoogle Scholar
  14. Li J et al (2018) Conductive regenerated cellulose film as counter electrode for efficient dye-sensitized solar cells. Cellulose 25:5113–5122CrossRefGoogle Scholar
  15. Ma Z, Chen P, Cheng W, Yan K, Pan L, Shi Y, Yu G (2018) Highly sensitive, printable nanostructured conductive polymer wireless sensor for food spoilage detection. Nano Lett 18:4570–4575CrossRefGoogle Scholar
  16. Mazzeo AD, Kalb WB, Chan L, Killian MG, Bloch JF, Mazzeo BA, Whitesides GM (2012) Paper-based, capacitive touch pads. Adv Mater 24:2850–2856CrossRefGoogle Scholar
  17. Nakagaito AN, Nogi M, Yano H (2010) Displays from transparent films of natural nanofibers. MRS Bull 35:214–218CrossRefGoogle Scholar
  18. Niu T, Xu J, Huang J (2014) Growth of aragonite phase calcium carbonate on the surface of a titania-modified filter paper. CrystEngComm 16:2424–2431CrossRefGoogle Scholar
  19. Onses MS, Sutanto E, Ferreira PM, Alleyne AG, Rogers JA (2015) Mechanisms, capabilities, and applications of high-resolution electrohydrodynamic jet printing. Small 11:4237–4266CrossRefGoogle Scholar
  20. Özdemir AT (2016) An analysis on sensor locations of the human body for wearable fall detection devices: principles and practice. Sensors 16:1161CrossRefGoogle Scholar
  21. Özdemir AT, Barshan B (2014) Detecting falls with wearable sensors using machine learning techniques. Sensors 14:10691–10708CrossRefGoogle Scholar
  22. Punpattanakul K, Kraduangdej S, Jiranusornkul N, Chiaranairungroj M, Pimpin A, Palaga T, Srituravanich W (2018) A novel patterning method for three-dimensional paper-based devices by using inkjet-printed water mask. Cellulose 25:2659–2665CrossRefGoogle Scholar
  23. Sakir M et al (2017) Fabrication of plasmonically active substrates using engineered silver nanostructures for SERS applications. ACS Appl Mater Int 9:39795–39803CrossRefGoogle Scholar
  24. Siegel AC, Phillips ST, Dickey MD, Lu N, Suo Z, Whitesides GM (2010) Foldable printed circuit boards on paper substrates. Adv Funct Mater 20:28–35CrossRefGoogle Scholar
  25. Tang Z, Li H, Hess DW, Breedveld V (2016) Effect of chain length on the wetting properties of alkyltrichlorosilane coated cellulose-based paper. Cellulose 23:1401–1413CrossRefGoogle Scholar
  26. Tekin E, Smith PJ, Schubert US (2008) Inkjet printing as a deposition and patterning tool for polymers and inorganic particles. Soft Matter 4:703–713CrossRefGoogle Scholar
  27. Tobjork D, Osterbacka R (2011) Paper electronics. Adv Mater 23:1935–1961CrossRefGoogle Scholar
  28. Tobjörk D et al (2012) IR-sintering of ink-jet printed metal-nanoparticles on paper. Thin Solid Films 520:2949–2955CrossRefGoogle Scholar
  29. Torun I, Onses MS (2017) Robust superhydrophobicity on paper: protection of spray-coated nanoparticles against mechanical wear by the microstructure of paper. Surf Coat Technol 319:301–308CrossRefGoogle Scholar
  30. Torvinen K, Sievänen J, Hjelt T, Hellen E (2012) Smooth and flexible filler-nanocellulose composite structure for printed electronics applications. Cellulose 19:821–829CrossRefGoogle Scholar
  31. Walker SB, Lewis JA (2012) Reactive silver inks for patterning high-conductivity features at mild temperatures. J Am Chem Soc 134:1419–1421CrossRefGoogle Scholar
  32. Wang F, Mao P, He H (2016) Dispensing of high concentration Ag nano-particles ink for ultra-low resistivity paper-based writing electronics. Sci Rep 6:21398CrossRefGoogle Scholar
  33. Wheeler H (1975) Small antennas. IEEE Trans Antennas Propag 23:462–469CrossRefGoogle Scholar
  34. Xia YN, Rogers JA, Paul KE, Whitesides GM (1999) Unconventional methods for fabricating and patterning nanostructures. Chem Rev 99:1823–1848CrossRefGoogle Scholar
  35. Zhang L, Gupta B, Goudeau B, Mano N, Kuhn A (2018) Wireless electromechanical readout of chemical information. J Am Chem Soc 140:15501–15506CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Nanotechnology Research Center (ERNAM)Erciyes UniversityKayseriTurkey
  2. 2.Department of Materials Science and EngineeringErciyes UniversityKayseriTurkey
  3. 3.Department of Textile EngineeringErciyes UniversityKayseriTurkey
  4. 4.Department of Electrical and Electronics EngineeringErciyes UniversityKayseriTurkey
  5. 5.UNAM - National Nanotechnology Research Center, Institute of Materials Science and NanotechnologyBilkent UniversityAnkaraTurkey

Personalised recommendations