Advertisement

Cellulose

, Volume 26, Issue 5, pp 3589–3599 | Cite as

Development of fabric-based microfluidic devices by wax printing

  • Azadeh Nilghaz
  • Xiaoqing Liu
  • Luyao Ma
  • Qian Huang
  • Xiaonan LuEmail author
Original Research
  • 107 Downloads

Abstract

Fabric has emerged as an alternative to paper for the fabrication of microfluidic devices. Fabric could be easily manufactured using various natural and synthetic materials that contain a wide variety of functional groups, which can participate in binding to different types of molecules without further functionalization. To allow a rapid fabrication of more sophisticated fabric-based devices, we demonstrate that a commercial wax printer can be used to print 2D and 3D devices on fabric, followed by melting wax into fabric with heat treatment. The heating temperature and time were optimized to create the devices. The relationship between the width of the originally printed lines and the formed hydrophobic barriers was also investigated. The developed microfluidic fabric-based analytical devices show great potentials for real-life applications using colorimetric assay.

Keywords

Fabric-based microfluidics Wax printing Fabrication method 

Notes

Acknowledgments

This study was supported by funds awarded to X.L. by Natural Sciences and Engineering Research Council of Canada (NSERC CRDPJ 486586-15).

Supplementary material

10570_2019_2317_MOESM1_ESM.docx (389 kb)
Supplementary material 1 (DOCX 389 kb)

References

  1. Abe K, Suzuki K, Citterio D (2008) Inkjet-printed microfluidic multianalyte chemical sensing paper. Anal Chem 80(18):6928–6934CrossRefGoogle Scholar
  2. Abe K, Kotera K, Suzuki K, Citterio D (2010) Inkjet-printed paperfluidic immuno-chemical sensing device. Anal Bioanal Chem 398(2):885–893CrossRefGoogle Scholar
  3. Bagherbeigi S, Corcoles Wicaksono DHB (2014) Cotton fabric as an immobilization matrix for low-cost and quick colorimetric enzyme-linked immunosorbent assay (ELISA). Anal Methods 6(18):7175–7180CrossRefGoogle Scholar
  4. Ballerini D, Li X, Shen W (2012) Patterned paper and alternative materials as substrates for low-cost microfluidic diagnostics. Microfluid Nanofluid 13:769–787CrossRefGoogle Scholar
  5. Bhandari P, Narahari T, Dendukuri D (2011) ‘Fab-chips’: a versatile, fabric-based platform for low-cost, rapid and multiplexed diagnostics. Lab Chip 11(15):2493–2499CrossRefGoogle Scholar
  6. Biermann CJ (1996) Handbook of pulping and papermaking. Academic Press, New YorkGoogle Scholar
  7. Carrilho E, Martinez AW, Whitesides GM (2009) Understanding wax printing: a simple micropatterning process for paper-based microfluidics. Anal Chem 81(16):7091–7095CrossRefGoogle Scholar
  8. Choi S, Kwon S, Kim H, Kim W, Kwon J, Lim MS, Lee HS, Choi KH (2017) Highly flexible and efficient fabric-based organic light-emitting devices for clothing-shaped wearable displays. Sci Rep 7:6424CrossRefGoogle Scholar
  9. Das B, Das A, Kothari VK, Fangueiro R (2011) Development of mathematical model to predict vertical wicking behaviour. J Text Inst 102(11):957–970CrossRefGoogle Scholar
  10. Dungchai W, Chailapakul O, Henry CS (2011) A low-cost, simple, and rapid fabrication method for paper-based microfluidics using wax screen-printing. Analyst 136(1):77–82CrossRefGoogle Scholar
  11. Fujii T (2002) PDMS-based microfluidic devices for biomedical applications. Microelectron Eng 61:907–914CrossRefGoogle Scholar
  12. Ganneboyina SR, Ghatak A (2012) Generation of air–water two-phase flow patterns by altering the helix angle in triple helical microchannels. Ind Eng Chem Res 51(27):9356–9364CrossRefGoogle Scholar
  13. Henares TG, Yamada K, Takaki S, Suzuki K, Citterio D (2017) “Drop-slip” bulk sample flow on fully inkjet-printed microfluidic paper-based analytical device. Sens Actuators B Chem 244:1129–1137CrossRefGoogle Scholar
  14. Hollies NRS, Kaessinger MM, Bogaty H (1956) Water transport mechanisms in textile materials1 Part I: the role of yarn roughness in capillary-type penetration. Text Res J 26(11):829–835CrossRefGoogle Scholar
  15. Jones SW, Thomas OM, Aref H (1989) Chaotic advection by laminar flow in a twisted pipe. J Fluid Mech 209:335–357CrossRefGoogle Scholar
  16. Li X, Tian J, Shen W (2010) Thread as a versatile material for low-cost microfluidic diagnostics. ACS Appl Mater Interfaces 2(1):1–6CrossRefGoogle Scholar
  17. Ma L, Nilghaz A, Choi JR, Liu X, Lu X (2018) Rapid detection of clenbuterol in milk using microfluidic paper-based ELISA. Food Chem 246:437–441CrossRefGoogle Scholar
  18. Mahmud MA, Blondeel EJM, Kaddoura M, MacDonald BD (2018) Features in microfluidic paper-based devices made by laser cutting: how small can they be? Micromachines 9(5):220CrossRefGoogle Scholar
  19. Malon RS, Chua KY, Wicaksono DH, Córcoles EP (2014) Cotton fabric-based electrochemical device for lactate measurement in saliva. Analyst 139(12):3009–3016CrossRefGoogle Scholar
  20. Martinez AW, Phillips ST, Whitesides GM (2008a) Three-dimensional microfluidic devices fabricated in layered paper and tape. PNAS 105(50):19606–19611CrossRefGoogle Scholar
  21. Martinez AW, Phillips ST, Wiley BJ, Gupta M, Whitesides GM (2008b) FLASH: a rapid method for prototyping paper-based microfluidic devices. Lab Chip 8(12):2146–2150CrossRefGoogle Scholar
  22. Masoodi R, Pillai KM (2010) Darcy’s law-based model for wicking in paper-like swelling porous media. AIChE J 56(9):2257–2267Google Scholar
  23. Nie J, Zhang Y, Lin L (2012) Low-cost fabrication of paper-based microfluidic devices by one-step plotting. Anal Chem 84(15):6331–6335CrossRefGoogle Scholar
  24. Nilghaz A, Lu X (2018) Detection of antibiotic residues in pork using paper-based microfluidic device coupled with filtration and concentration. Anal Chim Acta 1046:163–169CrossRefGoogle Scholar
  25. Nilghaz A, Shen W (2015) Low-cost blood plasma separation method using salt functionalized paper. RSC Adv 5(66):53172–53179CrossRefGoogle Scholar
  26. Nilghaz A, Wicaksono DHB, Gustiono D, Abdul Majid F, Supriyanto E, Abdul Kadir M (2012) Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique. Lab Chip 12(1):209–218CrossRefGoogle Scholar
  27. Nilghaz A, Zhang L, Li M, Ballerini DR, Shen W (2014) Understanding thread properties for red blood cell antigen assays: weak ABO blood typing. ACS Appl Matter Interfaces 6(24):22209–22215CrossRefGoogle Scholar
  28. Nilghaz A, Bagherbaigi S, Lam CL, Mousavi SM, Crcoles EP, Wicaksono DHB (2015) Multiple semi-quantitative colorimetric assays in compact embeddable microfluidic cloth-based analytical device for effective point-of-care diagnostic. Microfluid Nanofluid 19(2):317–333CrossRefGoogle Scholar
  29. Nilghaz A, Ballerini DR, Guan L, Li L, Shen W (2016) Red blood cell transport mechanisms in polyester thread-based blood typing devices. Anal Bioanal Chem 408(5):1365–1371CrossRefGoogle Scholar
  30. Parikesit GOF, Prasetia F, Pribadi GA, Simbolon DC, Pradhana GY, Prastowo AR, Gunawan A, Suryopratomo K, Kusumaningtyas I (2012) Textile-based microfluidics: modulated wetting, mixing, sorting, and energy harvesting. J Text Inst 103(10):1077–1087CrossRefGoogle Scholar
  31. Piscitelli F, Saccone G, Gianvito A, Cosentino, Mazzola L. (2016) Microcrystalline paraffin wax as fuel for Hybrid Rocket Engine. In: 6th European conference for aeronautics and space sciencesGoogle Scholar
  32. Reches M, Mirica KA, Dasgupta R, Dickey MD, Butte MJ, Whitesides GM (2010) Thread as amatrix for biomedical assays. ACS Appl Mater Interfaces 2(6):1722–1728CrossRefGoogle Scholar
  33. Roman G (2014) Development of enhanced lateral flow test devices for point-of-care diagnostics. University of Rhode Island, ProQuest dissertations 1543927Google Scholar
  34. Sia SK, Whitesides GM (2003) Microfluidic devices fabricated in poly(dimethylsiloxane) for biological studies. Electrophoresis 24(21):3563–3576CrossRefGoogle Scholar
  35. Sorieul M, Dickson A, Hill SJ, Pearson H (2016) Plant fibre: molecular structure and biomechanical properties, of a complex living materials, influencing its deconstruction towards a biobased composite. Materials 9(8):618CrossRefGoogle Scholar
  36. Yager P, Edwards T, Fu E (2006) Microfluidic diagnostic technologies for global public health. Nature 442(7101):412–418CrossRefGoogle Scholar
  37. Yager P, Domingo GJ, Gerdes J (2008) Point-of-care diagnostics for global health. Annu Rev Biomed Eng 10:107–144CrossRefGoogle Scholar
  38. Yao Y, Zhang C (2016) A novel screen-printed microfluidic paper-based electrochemical device for detection of glucose and uric acid in urine. Biomed Microdevices 18(5):1–9CrossRefGoogle Scholar
  39. Yu B, James Lee L (2000) A simplified in-plane permeability model for textile fabrics. Polym Compos 21(5):660–685CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  • Azadeh Nilghaz
    • 1
  • Xiaoqing Liu
    • 1
  • Luyao Ma
    • 1
  • Qian Huang
    • 2
  • Xiaonan Lu
    • 1
    Email author
  1. 1.Food, Nutrition and Health Science, Faculty of Land and Food SystemsThe University of British ColumbiaVancouverCanada
  2. 2.Institute of PhotoelectronicesNankai UniversityTianjinChina

Personalised recommendations