Advertisement

Cellulose

pp 1–13 | Cite as

Layer-layer assembly of water-based graphene for facile fabrication of sensitive strain gauges on paper

  • Zulhelmi Ismail
Communication
  • 46 Downloads

Abstract

Paper has been proposed as an alternative substrate material for graphene-based strain gauges due to its high flexibility and accessibility when compared to the conventional substrates such as polymer that is not only rigid but also not recyclable. In the fabrication of graphene-based strain gauges on paper, inkjet printing is commonly used as the main deposition method of graphene on paper as this process allows a systematic control of strain gauge resistance by manipulating several factors such as print passes and drop spacing. However, the availability of inkjet printers that allows the printing of graphene solution is an issue as industrial inkjet printers can be obtained only at a premium price while modification of commercial inkjet printers is a must to replace the original ink with graphene ink. To counter this issue, a commercial photo paper has been used for the first time as a substrate during vacuum filtration of graphene solution for layer–layer assembly of strain gauges on paper. With the resulting gauge factor of up to 83 at the maximum and minimum strain of 1.4% and 0.03% (sensitivity of 1.25%) respectively, the fabricated strain gauge from photo paper shows the potential of paper to be used as a component in the future wearable device. Meanwhile, the advantages of using vacuum filtration as the selected technique for the deposition of graphene meanwhile are demonstrated in this work by varying the gauge factor through controlling the graphene deposition volume.

Graphical abstract

Keywords

Layer–layer assembly Water-based graphene Facile Strain gauges Paper 

Notes

Acknowledgments

The author acknowledges Universiti Malaysia Pahang for financial support (RDU 1803134) in this research work.

References

  1. Backes C et al (2016) Spectroscopic metrics allow in situ measurement of mean size and thickness of liquid-exfoliated few-layer graphene nanosheets. Nanoscale 8:4311–4323CrossRefGoogle Scholar
  2. Bessonov A, Kirikova M, Haque S, Gartseev I, Bailey MJ (2014) Highly reproducible printable graphite strain gauges for flexible devices. Sens Actuators A 206:75–80CrossRefGoogle Scholar
  3. Bøggild P et al (2017) Mapping the electrical properties of large-area graphene. 2D Mater 4:042003CrossRefGoogle Scholar
  4. Boland CS et al (2016) Sensitive electromechanical sensors using viscoelastic graphene-polymer nanocomposites. Science 354:1257–1260CrossRefGoogle Scholar
  5. Boland CS, Khan U, Binions M, Barwich S, Boland JB, Weaire D, Coleman JN (2018) Graphene-coated polymer foams as tuneable impact sensors. Nanoscale 10:5366–5375CrossRefGoogle Scholar
  6. Cai S, Liu X, Huang J, Liu Z (2017) Feasibility of polyethylene film as both supporting material for transfer and target substrate for flexible strain sensor of CVD graphene grown on Cu foil. RSC Adv 7:48333–48340CrossRefGoogle Scholar
  7. Casiraghi C et al (2018) Inkjet printed 2D-crystal based strain gauges on paper. Carbon 129:462–467CrossRefGoogle Scholar
  8. Childres I, Jauregui LA, Park W, Cao H, Chen YP (2013) Raman spectroscopy of graphene and related materials. New Dev Photon Mater Res 1:1–20CrossRefGoogle Scholar
  9. Chun S, Choi Y, Park W (2017) All-graphene strain sensor on soft substrate. Carbon 116:753–759CrossRefGoogle Scholar
  10. Correia V, Caparros C, Casellas C, Francesch L, Rocha J, Lanceros-Mendez S (2013) Development of inkjet printed strain sensors. Smart Mater Struct 22:105028CrossRefGoogle Scholar
  11. Do TN, Visell Y (2017) Stretchable, twisted conductive microtubules for wearable computing, robotics, electronics, and healthcare. Sci Repo 7:1753CrossRefGoogle Scholar
  12. Gullapalli H et al (2010) Flexible piezoelectric ZnO–paper nanocomposite strain sensor. Small 6:1641–1646CrossRefGoogle Scholar
  13. Hempel M, Nezich D, Kong J, Hofmann M (2012) A novel class of strain gauges based on layered percolative films of 2D materials. Nano Lett 12:5714–5718CrossRefGoogle Scholar
  14. Hyun WJ, Secor EB, Hersam MC, Frisbie CD, Francis LF (2015) High-resolution patterning of graphene by screen printing with a silicon stencil for highly flexible printed electronics. Adv Mater 27:109–115CrossRefGoogle Scholar
  15. Ismail Z, Abdullah AH, Abidin ASZ, Yusoh K (2017a) Application of graphene from exfoliation in kitchen mixer allows mechanical reinforcement of PVA/graphene film. Appl Nanosci 7:317–324CrossRefGoogle Scholar
  16. Ismail Z, Kassim NFA, Abdullah AH, Abidin ASZ, Ismail FS, Yusoh K (2017b) Black tea assisted exfoliation using a kitchen mixer allowing one-step production of graphene. Mater Res Express 4:075607CrossRefGoogle Scholar
  17. Jiang X et al (2016) Foldable and electrically stable graphene film resistors prepared by vacuum filtration for flexible electronics. Surf Coat Technol 299:22–28CrossRefGoogle Scholar
  18. Kang T-K (2014) Tunable piezoresistive sensors based on pencil-on-paper. Appl Phys Lett 104:073117CrossRefGoogle Scholar
  19. Kim K, Ahn SI, Choi KC (2014) Simultaneous synthesis and patterning of graphene electrodes by reactive inkjet printing. Carbon 66:172–177CrossRefGoogle Scholar
  20. Lee WP, Routh AF (2004) Why do drying films crack? Langmuir 20:9885–9888CrossRefGoogle Scholar
  21. Lin C-W, Zhao Z, Kim J, Huang J (2014) Pencil drawn strain gauges and chemiresistors on paper. Sci Rep 4:3812CrossRefGoogle Scholar
  22. Liu H et al (2017a) Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing. J Mater Chem C 5:73–83CrossRefGoogle Scholar
  23. Liu H, Jiang H, Du F, Zhang D, Li Z, Zhou H (2017b) Flexible and degradable paper-based strain sensor with low cost. ACS Sustain Chem Eng 5:10538–10543CrossRefGoogle Scholar
  24. Liu H et al (2017c) A promising material for human-friendly functional wearable electronics. Mater Sci Eng R Rep 112:1–22.  https://doi.org/10.1016/j.mser.2017.01.001 CrossRefGoogle Scholar
  25. Overgaard MH, Kühnel M, Hvidsten R, Petersen SV, Vosch T, Nørgaard K, Laursen BW (2017) Highly conductive semitransparent graphene circuits screen-printed from water-based graphene oxide ink. Adv Mater Technol 2:1700011CrossRefGoogle Scholar
  26. Ozdemir O et al (2015) Improvement of the electromechanical performance of carboxymethylcellulose-based actuators by graphene nanoplatelet loading. Cellulose 22:3251–3260.  https://doi.org/10.1007/s10570-015-0702-3 CrossRefGoogle Scholar
  27. Pan M, Zhang Y, Shan C, Zhang X, Gao G, Pan B (2017) Flat graphene-enhanced electron transfer involved in redox reactions. Environ Sci Technol 51:8597–8605CrossRefGoogle Scholar
  28. Papageorgiou DG, Kinloch IA, Young RJ (2017) Mechanical properties of graphene and graphene-based nanocomposites. Prog Mater Sci 90:75–127CrossRefGoogle Scholar
  29. Park S et al (2012) The effect of concentration of graphene nanoplatelets on mechanical and electrical properties of reduced graphene oxide papers. Carbon 50:4573–4578CrossRefGoogle Scholar
  30. Prosser JH, Brugarolas T, Lee S, Nolte AJ, Lee D (2012) Avoiding cracks in nanoparticle films. Nano Lett 12:5287–5291CrossRefGoogle Scholar
  31. Retief J, Fourie P, Perold W (2018) Modified desktop inkjet printer as low-cost material deposition device. In: Biomedical engineering conference (SAIBMEC), 2018 3rd Biennial South African. IEEE, pp 1–4Google Scholar
  32. Saha B, Baek S, Lee J (2017) Highly sensitive bendable and foldable paper sensors based on reduced graphene oxide. ACS Appl Mater Interfaces 9:4658–4666CrossRefGoogle Scholar
  33. Song N-j, Lu C-x, Chen C-m, Ma C-l, Kong Q-q (2017) Effect of annealing temperature on the mechanical properties of flexible graphene films. New Carbon Mater 32:221–226.  https://doi.org/10.1016/S1872-5805(17)60119-7 CrossRefGoogle Scholar
  34. Tao L-Q et al (2017a) Self-adapted and tunable graphene strain sensors for detecting both subtle and large human motions. Nanoscale 9:8266–8273CrossRefGoogle Scholar
  35. Tao L-Q et al (2017b) Graphene-paper pressure sensor for detecting human motions. ACS Nano 11:8790–8795.  https://doi.org/10.1021/acsnano.7b02826 CrossRefPubMedGoogle Scholar
  36. Tian H, Shu Y, Cui Y-L, Mi W-T, Yang Y, Xie D, Ren T-L (2014) Scalable fabrication of high-performance and flexible graphene strain sensors. Nanoscale 6:699–705.  https://doi.org/10.1039/c3nr04521h CrossRefPubMedGoogle Scholar
  37. Varrla E, Paton KR, Backes C, Harvey A, Smith RJ, McCauley J, Coleman JN (2014) Turbulence-assisted shear exfoliation of graphene using household detergent and a kitchen blender. Nanoscale 6:11810–11819CrossRefGoogle Scholar
  38. Wang Y et al (2014) Wearable and highly sensitive graphene strain sensors for human motion monitoring. Adv Funct Mater 24:4666–4670.  https://doi.org/10.1002/adfm.201400379 CrossRefGoogle Scholar
  39. Weng Z, Su Y, Wang DW, Li F, Du J, Cheng HM (2011) Graphene–cellulose paper flexible supercapacitors. Adv Energy Mater 1:917–922CrossRefGoogle Scholar
  40. Yang T et al (2017) A wearable and highly sensitive graphene strain sensor for precise home-based pulse wave monitoring. ACS Sens 2:967–974CrossRefGoogle Scholar
  41. Yang Y-F et al (2018) An ultrasensitive strain sensor with a wide strain range based on graphene armour scales. Nanoscale 10:11524–11530.  https://doi.org/10.1039/c8nr02652a CrossRefPubMedGoogle Scholar
  42. Yokaribas V, Wagner S, Schneider DS, Friebertshäuser P, Lemme MC, Fritzen C-P (2017) Strain gauges based on CVD graphene layers and exfoliated graphene nanoplatelets with enhanced reproducibility and scalability for large quantities. Sensors 17:2937CrossRefGoogle Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  1. 1.Innovative Materials Focused Group (INNOMAT), Faculty of Manufacturing EngineeringUniversiti Malaysia PahangPekanMalaysia

Personalised recommendations