Advertisement

Catalysis Letters

, Volume 149, Issue 1, pp 259–271 | Cite as

Extractive-Catalytic Oxidative Desulfurization with Graphene Oxide-Based Heteropolyacid Catalysts: Investigation of Affective Parameters and Kinetic Modeling

  • Azam Khodadadi Dizaji
  • Hamid Reza MortahebEmail author
  • Babak MokhtaraniEmail author
Article
  • 43 Downloads

Abstract

Different tungsten and molybdenum containing heteropolyacid (HPA) catalysts (H3PMo12O40:Mo12, H3PMo8W4O40:Mo8W4, H3PMo6W6O40:Mo6W6, H3PW12O40:W12) were immobilized on graphene oxide (GO) to obtain HPA–GO heterogeneous catalysts (Mo12–GO, Mo8W4–GO, Mo6W6–GO, and W12–GO). The synthesized catalysts were applied in removal of sulfur containing compounds [benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT)] with combined extraction–oxidation process using a batch reactor. The sulfur removal efficiency was gradually increased with increasing the ratio of molybdenum ions in the HPAs and complete sulfur removal efficiency for DBT was obtained for Mo12–GO. The roles of affecting parameters such as extracting solvent, catalyst calcination, and feed concentration were also investigated. Among different extracting solvents including acetonitrile, DMF, NMP, methanol, water, and ethylene glycol, acetonitrile represented the best ECOD performance as the extracting solvent. The performance of non-calcined catalyst for sulfur removal was slightly better than that by the calcined one. It was also found that the high sulfur removal activity of the extractive-catalytic oxidative process (ECOD) was retained even at high feed concentration. The kinetic model was evaluated considering mass transfer coupled with chemical reaction, in which the catalytic oxidation reaction was recognized as the rate-controlling step. The kinetic parameters such as rate constants and apparent activation energy were determined.

Graphical Abstract

Keywords

Extractive-oxidative desulfurization Graphene oxide Heteropolyacids (HPAs) Kinetic modeling Mass transfer 

Notes

Compliance with Ethical Standards

Conflict of interest

All authors declare no conflicts of interest.

References

  1. 1.
    Komintarachat C, Trakarnpruk W (2006) Oxidative desulfurization using polyoxometalates. Ind Eng Chem Res 45:1853–1856CrossRefGoogle Scholar
  2. 2.
    Otsuki S, Nonaka T, Takashima N et al (2000) Oxidative desulfurization of light gas oil and vacuum gas oil by oxidation and solvent extraction. Energy Fuels 14:1232–1239CrossRefGoogle Scholar
  3. 3.
    Chamack M, Mahjoub AR, Aghayan H (2014) Cesium salts of tungsten-substituted molybdophosphoric acid immobilized onto platelet mesoporous silica: efficient catalysts for oxidative desulfurization of dibenzothiophene. Chem Eng J 255:686–694CrossRefGoogle Scholar
  4. 4.
    Wang R, Zhang G, Zhao H (2010) Polyoxometalate as effective catalyst for the deep desulfurization of diesel oil. Catal Today 149:117–121CrossRefGoogle Scholar
  5. 5.
    Lu Y, Liu M, Nie H et al (2016) Direct fabrication of metal-free hollow graphene balls with a self-supporting structure as efficient cathode catalysts of fuel cell. J Nanopart Res 18:141–156CrossRefGoogle Scholar
  6. 6.
    Khodadadi DA, Mortaheb HR, Mokhtarani B (2018) Complete oxidative desulfurization using graphene oxide-based phosphomolybdic acid catalyst: process optimization by two phase mass balance approach. Chem Eng J 335:362–372CrossRefGoogle Scholar
  7. 7.
    Maity U, Basu JK, Sengupta S (2014) Performance study of extraction and oxidation—extraction coupling processes in the removal of thiophenic compounds. Fuel Process Technol 121:119–124CrossRefGoogle Scholar
  8. 8.
    Suryawanshi NB, Bhandari VM, Sorokhaibam LG et al (2016) A non-catalytic deep desulphurization process using hydrodynamic cavitation. Sci Rep 6:1–8CrossRefGoogle Scholar
  9. 9.
    Suryawanshi NB, Bhandari VM, Sorokhaibam LG et al (2017) Developing techno-economically sustainable methodologies for deep desulfurization using hydrodynamic cavitation. Fuel 210:482–490CrossRefGoogle Scholar
  10. 10.
    De Filippis P, Scarsella M (2003) Oxidative desulfurization: oxidation reactivity of sulfur compounds in different organic matrixes. Energy Fuels 17:1452–1455CrossRefGoogle Scholar
  11. 11.
    Lu Z, Guo E, Zhong H et al (2016) Kinetic modeling of the extraction–oxidation coupling process for the removal of dibenzothiophene. Energy Fuels 30:7214–7220CrossRefGoogle Scholar
  12. 12.
    Haw KG, Abu bakar WAW, Ali R et al (2010) Catalytic oxidative desulfurization of diesel utilizing hydrogen peroxide and functionalized-activated carbon in a biphasic diesel-acetonitrile system. Fuel Process Technol 91:1105–1112CrossRefGoogle Scholar
  13. 13.
    Yang H, Jiang B, Sun Y et al (2017) Heterogeneous oxidative desulfurization of diesel fuel catalyzed by mesoporous polyoxometallate-based polymeric hybrid. J Hazard Mater 333:63–72CrossRefGoogle Scholar
  14. 14.
    Tian Y, Yao Y, Zhi Y et al (2015) Combined extraction-oxidation system for oxidative desulfurization (ODS) of a model fuel. Energy Fuels 29:618–625CrossRefGoogle Scholar
  15. 15.
    Sengupta A, Kamble PD, Basu JK et al (2012) Kinetic study and optimization of oxidative desulfurization of benzothiophene using mesoporous titanium silicate-1 catalyst. Ind Eng Chem Res 51:147–157CrossRefGoogle Scholar
  16. 16.
    Okuhara T, Mizuno N, Misono M (1996) Catalytic chemistry of heteropoly compounds. Adv Catal 41:113–252Google Scholar
  17. 17.
    Fan X, Zhang F (2015) Multiple roles of graphene in heterogeneous catalysis. Chem Soc Rev 44:3023–3035CrossRefGoogle Scholar
  18. 18.
    Zhang Y, Wang R (2017) Nanocarbon materials for oxidative-adsorptive desulfurization using air oxygen under mild conditions. Diam Relat Mater 73:161–168CrossRefGoogle Scholar
  19. 19.
    Menzel R, Iruretagoyena D, Wang Y et al (2016) Graphene oxide/mixed metal oxide hybrid materials for enhanced adsorption desulfurization of liquid hydrocarbon fuels. Fuel 181:531–536CrossRefGoogle Scholar
  20. 20.
    Hajjar Z, Kazemeini M, Rashidi A et al (2016) Graphene based catalysts for deep hydrodesulfurization of naphtha and diesel fuels: a physiochemical study. Fuel 165:468–476CrossRefGoogle Scholar
  21. 21.
    Khodadadi Dizaji A, Mortaheb HR, Mokhtarani B (2017) Preparation of supported catalyst by adsorption of polyoxometalate on graphene oxide/reduced graphene oxide. Mater Chem Phys 199:424–434CrossRefGoogle Scholar
  22. 22.
    Khodadadi Dizaji A, Mortaheb HR, Mokhtarani B (2017) Pervaporative performance of polydimethylsiloxane–graphene/polyethersolfune hybrid membrane: effects of graphene structure and surface properties. Chem Eng Res Des 124:181–192CrossRefGoogle Scholar
  23. 23.
    Marcano D, Kosynkin D, Berlin J (2010) Improved synthesis of graphene oxide. ACS Nano 4:4806–4814CrossRefGoogle Scholar
  24. 24.
    Chamack M, Mahjoub AR, Aghayan H (2015) Catalytic performance of vanadium-substituted molybdophosphoric acid supported on zirconium modified mesoporous silica in oxidative desulfurization. Chem Eng Res Des 94:565–572CrossRefGoogle Scholar
  25. 25.
    Lu H, Ren W, Wang H et al (2013) Deep desulfurization of diesel by ionic liquid extraction coupled with catalytic oxidation using an Anderson-type catalyst [(C4H9)4N]4NiMo6O24H6. Appl Catal A Gen 453:376–382CrossRefGoogle Scholar
  26. 26.
    Shen D, Dai Y, Han J et al (2017) A nanocellulose template strategy for the controllable synthesis of tungsten-containing mesoporous silica for ultra-deep oxidative desulfurization. Chem Eng J 332:563–571CrossRefGoogle Scholar
  27. 27.
    De Angelis A, Pollesel P, Molinari D et al (2007) Heteropolyacids as effective catalysts to obtain zero sulfur diesel. Pure Appl Chem 79:1887–1894CrossRefGoogle Scholar
  28. 28.
    Choi AES, Roces S, Dugos N et al (2016) Oxidation by H2O2 of bezothiophene and dibenzothiophene over different polyoxometalate catalysts in the frame of ultrasound and mixing assisted oxidative desulfurization. Fuel 180:127–136CrossRefGoogle Scholar
  29. 29.
    Sobati MA, Dehkordi AM, Shahrokhi M (2010) Extraction of oxidized sulfur-containing compounds of non-hydrotreated gas oil. Chem Eng Technol 33:1515–1524CrossRefGoogle Scholar
  30. 30.
    Ramírez-Verduzco LF, Torres-García E, Gómez-Quintana R et al (2004) Desulfurization of diesel by oxidation/extraction scheme: influence of the extraction solvent. Catal Today 98:289–294CrossRefGoogle Scholar
  31. 31.
    Zhao K, Cheng Y, Liu H et al (2015) RSC Advances extractive desulfurization of dibenzothiophene by a optimization by Box—Behnken design. RSC Adv 5:66013–66023CrossRefGoogle Scholar
  32. 32.
    Tegou E, Pseiropoulos G, Filippidou MK et al (2016) Low-temperature thermal reduction of graphene oxide films in ambient atmosphere: infra-red spectroscopic studies and gas sensing applications. Microelectron Eng 159:146–150CrossRefGoogle Scholar
  33. 33.
    Gu Q, Wen G, Su D (2017) Reduced graphene oxide: a metal-free catalyst for aerobic oxidative desulfurization. Green Chem 19:1175–1181CrossRefGoogle Scholar
  34. 34.
    Katheria S, Gupta A, Deo G et al (2016) Effect of calcination temperature on stability and activity of Ni/MgAl2O4 catalyst for steam reforming of methane at high pressure condition. Int J Hydrog Energy 41:14123–14132CrossRefGoogle Scholar
  35. 35.
    Wang R, Yu F, Zhang G et al (2010) Performance evaluation of the carbon nanotubes supported Cs2.5H0.5PW12O40 as efficient and recoverable catalyst for the oxidative removal of dibenzothiophene. Catal Today 150:37–41CrossRefGoogle Scholar
  36. 36.
    García-Gutiérrez JL, Fuentes GA, Hernández-Terán ME et al (2008) Ultra-deep oxidative desulfurization of diesel fuel by the Mo/Al2O3–H2O2 system: the effect of system parameters on catalytic activity. Appl Catal A Gen 334:366–373CrossRefGoogle Scholar
  37. 37.
    Qin L, Zheng Y, Li D et al (2016) Phosphotungstic acid immobilized on amino functionalized spherical millimeter-sized mesoporous Al2O3 bead and its superior performance in oxidative desulfurization of dibenzothiophene. Fuel 181:827–835CrossRefGoogle Scholar
  38. 38.
    Azu KY, Uruya TF, Iki KM (2003) Immobilized tungstophosphoric acid catalyzed oxidative desulfurization of diesel oil with hydrogen peroxide. J Jpn Petroleum Inst 46:379–382CrossRefGoogle Scholar
  39. 39.
    Ribeiro S, Barbosa ADS, Gomes AC et al (2013) Catalytic oxidative desulfurization systems based on Keggin phosphotungstate and metal-organic framework MIL-101. Fuel Process Technol 116:350–357CrossRefGoogle Scholar
  40. 40.
    Ertl G, Knözinger H, Schüth F et al (2008) Handbook of heterogeneous catalysis, 2nd edn. Wiley-VCH, WeinheimCrossRefGoogle Scholar
  41. 41.
    Khodadadi Dizaji A, Mortaheb HR, Mokhtarani B (2016) Noncovalently functionalized graphene oxide / graphene with imidazolium-based ionic liquids for adsorptive removal of dibenzothiophene from model fuel. J Mater Sci 51:10092–10103CrossRefGoogle Scholar
  42. 42.
    Dumitriu E, Guimon C, Cordoneanu A et al (2001) Heterogeneous sulfoxidation of thioethers by hydrogen peroxide over layered double hydroxides as catalysts. Catal Today 66:529–534CrossRefGoogle Scholar
  43. 43.
    Zhu W, Li H, Gu Q et al (2011) Kinetics and mechanism for oxidative desulfurization of fuels catalyzed by peroxo-molybdenum amino acid complexes in water-immiscible ionic liquids. J Mol Catal A Chem 336:16–22CrossRefGoogle Scholar
  44. 44.
    Zhu W, Zhu G, Li H et al (2013) Catalytic kinetics of oxidative desulfurization with surfactant-type polyoxometalate-based ionic liquids. Fuel Process Technol 106:70–76CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Chemistry and Chemical Engineering Research Center of IranTehranIran

Personalised recommendations