Calculation of Compression and Discharge Processes in a Two-Stage Hybrid Piston Power Machine with Liquid Piston
COMPRESSORS, PUMPS, AND PIPELINE FITTINGS
First Online:
- 37 Downloads
The schematic diagram of a two-stage hybrid piston power machine with liquid piston in the second stage, which maintains gas compression up to pressures of 10 MPa, is presented. On the basis of the equations of conservation of flow and energy, a method for he calculation of compression and discharge processes is developed. Analytical expressions are obtained for determining the flow rates of the liquid in the second stageand in the gas cap as well as the fluid pressures at characteristic points of the system. Certification of the new technique is performed and the working processes that take place in the hydraulic part of a two-stage hybrid piston power machine are analyzed.
Keywords
compressor pump cooling hybrid power machine liquid piston compression and discharge processesReferences
- 1.V. E. Shcherba, A. P. Bolshtyanskii, V. V. Shalai, and E. V. Khodyreva, Pump Compressors. Working Processes and Design Fundamentals [in Russian], Mashinostroenie, Moscow (2013).Google Scholar
- 2.V. E. Shcherba, A. P. Bolshtyanskii, S. Yu. Kaigorodov, and D. A. Kuzeeva, Analysis of basic advantages realized by combining positive-displacement compressors and pumps into a unified machine, Vest. Mashinostroenie, No. 12, 15−19 (2015).Google Scholar
- 3.V. E. Shcherba, V. V. Shalai, and A. V. Grigor’ev, Analysis of the influence of discharge pressure in the compressor section on the working processes and characteristic of a hybrid piston power machine with stepwise-type slot seal, Izv. Vyss. Ucheb. Zaved. Mashinostroenie, No. 4 (697), 49−57 (2018).Google Scholar
- 4.V. E. Shcherba, V. V. Shalai, A. V. Grigor’ev, et al., Analysis of theoretical and experimental results on the influence of discharge pressure in the pump section on the working processes and characteristic of a hybrid piston power machine stepwise-type slot seal, Zh. Sibirsk. Federal. Un-ta. Tekhnika i Tekhnologii, 11, No. 5, 591−603 (2018).Google Scholar
- 5.V. E. Shcherba, Theory, Design, and Construction of Positive-Displacement Piston Compressors. Textbook [in Russian], Yurayt, Moscow (2019).Google Scholar
- 6.I. E. Idel’chik, Textbook on Hydraulic Resistances [in Russian], M. O. Shteynberg, ed., Mashinostroenie, Moscow (1992).Google Scholar
- 7.P. I. Plastinin, Piston Compressors, vol. 1 [in Russian], KolosS, Moscow (2006).Google Scholar
- 8.A. D. Al’tshul’ and P. G. Kiselev, Hydraulics and Hydrodynamics [in Russian], Stroiizdat, Moscow (1975).Google Scholar
Copyright information
© Springer Science+Business Media, LLC, part of Springer Nature 2019