Advertisement

Evaluation of EPS wall effectiveness to mitigate shallow foundation deformation induced by reverse faulting

  • Mohammad Hasan Baziar
  • Sajjad Heidari Hasanaklou
  • Alireza Saeedi AzizkandiEmail author
Original Research

Abstract

A comprehensive study is presented to illustrate the effect of an expanded polystyrene sheet (EPS) wall for absorbing fault rupture and its effects on shallow embedded foundations. Numerical modeling has been thoroughly validated through centrifuge test results. Various embedment depths and fault dip angles were considered to specify the critical foundation position on the soil surface. Furthermore, the impact of vertical trenching of an EPS wall, next to a rigid foundation, was investigated to mitigate surface foundation deformation. Results indicated that, due to high compressibility and low shear resistance that is not time dependent, an EPS wall panel protects the foundation by absorbing fault induced shear strains in the soil stratum. The effectiveness of such walls depends mainly on the geometry, location and mechanical characteristics of the walls, foundation location, bedrock fault offset, and fault dip angle.

Keywords

Fault rupture Critical position of foundation EPS wall Mitigating foundation deformation Embedment depth 

Notes

References

  1. Ahmed W, Bransby MF (2009) Interaction of shallow foundations with reverse faults. J Geotech Geoenviron Eng 135(7):914–924CrossRefGoogle Scholar
  2. Alzawi A, El Naggar MH (2011) Full scale experimental study on vibration scattering using open and in-filled (GeoFoam) wave barriers. Soil Dyn Earthq Eng 31(3):306–317CrossRefGoogle Scholar
  3. Anastasopoulos I, Gazetas G (2007a) Foundation–structure systems over a rupturing normal fault: part I. Observations after the Kocaeli 1999 earthquake. Bull Earthq Eng 5(3):253–275CrossRefGoogle Scholar
  4. Anastasopoulos I, Gazetas G (2007b) Foundation–structure systems over a rupturing normal fault: Part II. Analysis of the Kocaeli case histories. Bull Earthq Eng 5(3):277–301CrossRefGoogle Scholar
  5. Anastasopoulos I, Gazetas G, Bransby MF, Davies MCR, El Nahas A (2007) Fault rupture propagation through sand: finite-element analysis and validation through centrifuge experiments. J Geotech Geoenviron Eng 133(8):943–958CrossRefGoogle Scholar
  6. Anastasopoulos I, Antonakos G, Gazetas G (2010) Slab foundation subjected to thrust faulting in dry sand: parametric analysis and simplified design method. Soil Dyn Earthq Eng 30(10):912–924CrossRefGoogle Scholar
  7. Ashtiani M, Ghalandarzadeh A, Towhata I (2015) Centrifuge modeling of shallow embedded foundations subjected to reverse fault rupture. Can Geotech J 53(3):505–519CrossRefGoogle Scholar
  8. Ashtiani M, Ghalandarzadeh A, Mahdavi M, Hedayati M (2017) Centrifuge modeling of geotechnical mitigation measures for shallow foundations subjected to reverse faulting. Can Geotechn JGoogle Scholar
  9. ASTM D 6817–07 Standard specification for rigid cellular polystyrene geofoam. ASTM, West ConshohockenGoogle Scholar
  10. Baziar MH, Nabizadeh A, Lee CJ, Hung WY (2014) Centrifuge modeling of interaction between reverse faulting and tunnel. Soil Dyn Earthq Eng 65:151–164CrossRefGoogle Scholar
  11. Baziar MH, Nabizadeh A, Jabbary M (2015) Numerical modeling of interaction between dip-slip fault and shallow foundation. Bull Earthq Eng 13(6):1613–1632CrossRefGoogle Scholar
  12. Baziar MH, Nabizadeh A, Mehrabi R, Lee CJ, Hung WY (2016) Evaluation of underground tunnel response to reverse fault rupture using numerical approach. Soil Dyn Earthq Eng 83:1–17CrossRefGoogle Scholar
  13. Bransby MF, Davies MCR, El Nahas A, Nagaoka S (2008a) Centrifuge modelling of reverse fault–foundation interaction. Bull Earthq Eng 6(4):607–628CrossRefGoogle Scholar
  14. Bransby MF, Davies MCR, Nahas AE (2008b) Centrifuge modelling of normal fault–foundation interaction. Bull Earthq Eng 6(4):585–605CrossRefGoogle Scholar
  15. Bray JD (1990) The effects of tectonic movements on stresses and deformations in earth embankments. Ph.D. dissertation, California at Berkeley, BerkeleyGoogle Scholar
  16. Bray JD (2001) Developing mitigation measures for the hazards associated with earthquake surface fault rupture. Workshop on seismic fault-induced failures—possible remedies for damage to urban facilities. University of Tokyo Press, pp 55–79Google Scholar
  17. Bray JD, Seed RB, Cluff LS, Seed HB (1994) Earthquake fault rupture propagation through soil. J Geotech Eng 120(3):543–561CrossRefGoogle Scholar
  18. Chen WS, Huang BS, Chen YG, Lee YH, Yang CN, Lo CH, Chang HC, Sung QC, Huang NW, Lin CC, Sung SH (2001) 1999 Chi–Chi earthquake: a case study on the role of thrust-ramp structures for generating earthquakes. Bull Seismol Soc Am 91(5):986–994CrossRefGoogle Scholar
  19. Duancan JM (1980) Strength, stress–strain and bulk modulus parameters for finite element analyses of stresses and movements in soil masses. Report No. UCB/GT/80-01Google Scholar
  20. Erickson SG, Strayer LM, Suppe J (2001) Initiation and reactivation of faults during movement over a thrust-fault ramp: numerical mechanical models. J Struct Geol 23(1):11–23CrossRefGoogle Scholar
  21. Fadaee M, Ezzatyazdi P, Anastasopoulos I, Gazetas G (2016) Mitigation of reverse faulting deformation using a soil bentonite wall: dimensional analysis, parametric study, design implications. Soil Dyn Earthq Eng 89:248–261CrossRefGoogle Scholar
  22. Gazetas G, Pecker A, Faccioli E, Paolucci R, Anastasopoulos I (2008) Preliminary design recommendations for dip-slip fault–foundation interaction. Bull Earthq Eng 6(4):677–687CrossRefGoogle Scholar
  23. Lade PV, Cole DA Jr, Cummings D (1984) Multiple failure surfaces over dip-slip faults. J Geotech Eng 110(5):616–627CrossRefGoogle Scholar
  24. Lee JW, Hamada M (2005) An experimental study on earthquake fault rupture propagation through a sandy soil deposit. Struct Eng Earthq Eng 22(1):1s–13sCrossRefGoogle Scholar
  25. Lin ML, Chung CF, Jeng FS (2006) Deformation of overburden soil induced by thrust fault slip. Eng Geol 88(1–2):70–89CrossRefGoogle Scholar
  26. Liyanapathirana DS, Ekanayake SD (2016) Application of EPS geofoam in attenuating ground vibrations during vibratory pile driving. Geotext Geomembr 44(1):59–69CrossRefGoogle Scholar
  27. Loli M, Anastasopoulos I, Bransby FM, Gazetas G (2011a) Normal and reverse fault rupture interaction with caisson foundations: centrifuge modeling and numerical simulation. Santiago 10:13Google Scholar
  28. Loli M, Anastasopoulos I, Bransby MF, Ahmed W, Gazetas G (2011b) Caisson foundations subjected to reverse fault rupture: centrifuge testing and numerical analysis. J Geotech Geoenviron Eng 137:914–925CrossRefGoogle Scholar
  29. Loukidis D, Bouckovalas GD, Papadimitriou AG (2009) Analysis of fault rupture propagation through uniform soil cover. Soil Dyn Earthq Eng 29(11–12):1389–1404CrossRefGoogle Scholar
  30. Nakai T, Wood DM, Stone KJ (1995) Numerical calculations of soil response over a displacing basement. Soils Found 35(2):25–35CrossRefGoogle Scholar
  31. Oettle NK, Bray JD (2013a) Fault rupture propagation through previously ruptured soil. J Geotech Geoenviron Eng 139:1637–1647CrossRefGoogle Scholar
  32. Oettle NK, Bray JD (2013b) Geotechnical mitigation strategies for earthquake surface fault rupture. J Geotech Geoenviron Eng 139:1864–1874CrossRefGoogle Scholar
  33. Puzrin AM, Alonso EE, Pinyol NM (2010) Geomechanics of failures. Springer, BerlinCrossRefGoogle Scholar
  34. White RJ (1994) Effect of particle size on localisation development in model tests on sand. Proc Centrif 94:817–822Google Scholar

Copyright information

© Springer Nature B.V. 2019

Authors and Affiliations

  • Mohammad Hasan Baziar
    • 1
  • Sajjad Heidari Hasanaklou
    • 1
  • Alireza Saeedi Azizkandi
    • 1
    Email author
  1. 1.School of Civil EngineeringIran University of Science and TechnologyTehranIran

Personalised recommendations