Skip to main content
Log in

Experimental assessment of the effectiveness of recovery annealing of VVER-1000 vessels

  • Published:
Atomic Energy Aims and scope

An experimental assessment of the effectiveness of recovery annealing of VVER-1000 vessels on the basis of mechanical tests and structural studies of control samples of the main metal and the weld-seam metal with high nickel content (>1.65%) in the No. 1 unit of the Balakovo nuclear power plant in states after primary irradiation in the control sample channels, annealing in a chosen regime, and repeat accelerated irradiation in the IR-8 research reactor to fluence corresponding to extended service to 60 yr and longer is presented. The mechanical tests and structural studies showed a high degree of recovery of the structure and properties for the chosen temperature–time regime of annealing as well as a lower rate of repeated after the recovery annealing embrittlement as compared with the rate of embrittlement with primary irradiation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. L. M. Utevskii, E. E. Glikman, and G. S. Kark, Reversible Temper Brittleness of Steel and Iron Alloys, Metallurgiya, Moscow (1985).

    Google Scholar 

  2. Yu. A. Nikolaev, “Radiation embrittlement of Cr–Ni–Mo and Cr–Mo RPV steels,” J. ASTM Intern., 4, No. 8, 1–17 (2007).

    Google Scholar 

  3. S. A. Saltykov, Stoichiometric Metallography, Metallurgiya, Moscow (1976).

    Google Scholar 

  4. P. Kelly, A. Jostsons, R. Blake, and J. Napier, “The determination of foil thickness by scanning transmission electron microscopy,” Phys. Status Solidi (A), 31, 771 (1975).

    Article  ADS  Google Scholar 

  5. B. Z. Margolin, A. A. Nikolaev, E. V. Yurchenko, et al., “Analysis of embrittlement of VVER-1000 vessel materials during operation,” Vopr. Materialoved., No. 4(60), 108–123 (2009).

    Google Scholar 

  6. M. K. Miller, A. A. Chernobaeva, Y. I. Shtrombakh, et al., “Evolution of the nanostructure of VVER-1000 RPV materials under neutron irradiation annealing,” J. Nucl. Mater., 385, 615–622 (2009).

    Article  ADS  Google Scholar 

  7. E. A. Kuleshova, B. A. Gurovich, Ya. I. Shtrombakh, et al., “Microstructural behavior of VVER-440 reactor pressure vessel steels under irradiation to neutron fluences beyond the design operation period,” J. Nucl. Mater., 342, No. 1–3, 77–89 (2005).

    Article  ADS  Google Scholar 

  8. V. A. Gurovich, E. A. Kuleshov, Ya. I. Shtrombakh, et al., “Fine structure behavior of VVER-1000 RPV materials under irradiation,” J. Nucl. Mater., 389, 490–496 (2009).

    Article  ADS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Additional information

Translated from Atomnaya Énergiya, Vol. 109, No. 4, pp. 205–213, October, 2010.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Shtrombakh, Y.I., Gurovich, B.A., Kuleshova, E.A. et al. Experimental assessment of the effectiveness of recovery annealing of VVER-1000 vessels. At Energy 109, 257–265 (2011). https://doi.org/10.1007/s10512-011-9354-z

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10512-011-9354-z

Keywords

Navigation