Advertisement

Vibration analysis of FG annular sector in moderately thick plates with two piezoelectric layers

  • S. Azaripour
  • M. BaghaniEmail author
Article
  • 14 Downloads

Abstract

Free vibration of functionally graded (FG) annular sector plates embedded with two piezoelectric layers is studied with a generalized differential quadrature (GDQ) method. Based on the first-order shear deformation (FSD) plate theory and Hamilton’s principle with parameters satisfying Maxwell’s electrostatics equation in the piezoelectric layers, governing equations of motion are developed. Both open and closed circuit (shortly connected) boundary conditions on the piezoelectric surfaces, which are respective conditions for sensors and actuators, are accounted for. It is observed that the open circuit condition gives higher natural frequencies than a shortly connected condition. For the simulation of the potential electric function in piezoelectric layers, a sinusoidal function in the transverse direction is considered. It is assumed that properties of the FG material (FGM) change continuously through the thickness according to a power distribution law. The fast rate convergence and accuracy of the GDQ method with a small number of grid points are demonstrated through some numerical examples. With various combinations of free, clamped, and simply supported boundary conditions, the effects of the thicknesses of piezoelectric layers and host plate, power law index of FGMs, and plate geometrical parameters (e.g., angle and radii of annular sector) on the in-plane and out-of-plane natural frequencies for different FG and piezoelectric materials are also studied. Results can be used to predict the behaviors of FG and piezoelectric materials in mechanical systems.

Key words

free vibration annular sector piezoelectric functionally graded material (FGM) first-order shear deformation (FSD) 

Chinese Library Classification

O343.7 

2010 Mathematics Subject Classification

70-XX 70Jxx 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    TUTUNCU, N. and OZTURK, M. Exact solutions for stresses in functionally graded pressure vessels. Composites Part B: Engineering, 32, 683–686 (2001)CrossRefGoogle Scholar
  2. [2]
    JALALI, M. H., ZARGAR, O., and BAGHANI, M. Size-dependent vibration analysis of FG microbeams in thermal environment based on modified couple stress theory. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (2018) https://doi.org/10.1007/s40997-018-0193-6Google Scholar
  3. [3]
    BAKHTIARI-NEJAD, F., SHAMSHIRSAZ,M., MOHAMMADZADEH, M., and SAMIE, S. Free vibration analysis of FG skew plates based on second order shear deformation theory. ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, New York (2014)Google Scholar
  4. [4]
    HASSANZADEH-AGHDAM, M. K., EDALATPANAH, S. A., and AZARIPOUR, S. Interphase region effect on the biaxial yielding envelope of SiC fiber-reinforced Ti matrix composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406218777532 (2018)Google Scholar
  5. [5]
    ZARGAR, O., MASOUMI, A., and MOGHADDAM, A. O. Investigation and optimization for the dynamical behaviour of the vehicle structure. International Journal of Automotive and Mechanical Engineering, 14, 4196–4210 (2017)CrossRefGoogle Scholar
  6. [6]
    LIU, F. L. and LIEW, K. Free vibration analysis of Mindlin sector plates: numerical solutions by differential quadrature method. Computer Methods in Applied Mechanics and Engineering, 177, 77–92 (1999)CrossRefzbMATHGoogle Scholar
  7. [7]
    WANG, X. and WANG, Y. Free vibration analyses of thin sector plates by the new version of differential quadrature method. Computer Methods in Applied Mechanics and Engineering, 193, 3957–3971 (2004)CrossRefzbMATHGoogle Scholar
  8. [8]
    NIE, G. and ZHONG, Z. Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges. Composite Structures, 84, 167–176 (2008)CrossRefGoogle Scholar
  9. [9]
    KELESHTERI, M., ASADI, H., andWANG, Q. Postbuckling analysis of smart FG-CNTRC annular sector plates with surface-bonded piezoelectric layers using generalized differential quadrature method. Computer Methods in Applied Mechanics and Engineering, 325, 689–710 (2017)MathSciNetCrossRefGoogle Scholar
  10. [10]
    KIANI, Y. and ESLAMI, M. An exact solution for thermal buckling of annular FGM plates on an elastic medium. Composites Part B: Engineering, 45, 101–110 (2013)CrossRefGoogle Scholar
  11. [11]
    HOSSEINI, R., ZARGAR, O., and HAMEDI, M. Improving power density of piezoelectric vibration-based energy scavengers. Journal of Solid Mechanics, 10, 98–109 (2018)Google Scholar
  12. [12]
    JALALI, M. H., SHAHRIARI, B., ZARGAR, O., BAGHANI, M., and BANIASSADI, M. Free vi-bration analysis of rotating functionally graded annular disc of variable thickness using generalized differential quadrature method. Scientia Iranica, 25, 728–740 (2018)Google Scholar
  13. [13]
    HAGHSHENAS, A. and ARANI, A. G. Nonlocal vibration of a piezoelectric polymeric nanoplate carrying nanoparticle via Mindlin plate theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228, 907–920 (2014)Google Scholar
  14. [14]
    ARANI, A. G., HAGHSHENAS, A., AMIR, S., MOZDIANFARD,M. R., and LATIFI, M. Electro-thermo-mechanical response of thick-walled piezoelectric cylinder reinforced by boron-nitride nanotubes. Strength of Materials, 45, 102–115 (2013)CrossRefGoogle Scholar
  15. [15]
    WANG, Y., XU, R. Q., and DING, H. J. Free axisymmetric vibration of FGM circular plates. Applied Mathematics and Mechanics (English Edition), 30, 1077–1082 (2009) https://doi.org/10.1007/s10483-009-0901-xMathSciNetCrossRefzbMATHGoogle Scholar
  16. [16]
    CHEN, W., LYU, C., and BIAN, Z. Free vibration analysis of generally laminated beams via state-space-based differential quadrature. Composite Structures, 63, 417–425 (2004)CrossRefGoogle Scholar
  17. [17]
    WANG, X. and LI, S. R. Free vibration analysis of functionally graded material beams based on Levinson beam theory. Applied Mathematics and Mechanics (English Edition), 37, 861–878 (2016) https://doi.org/10.1007/s10483-016-2094-9MathSciNetCrossRefzbMATHGoogle Scholar
  18. [18]
    SOHN, J. W., KIM, H. S., and CHOI, S. B. Active vibration control of smart hull structures using piezoelectric actuators. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 220, 1329–1337 (2006)Google Scholar
  19. [19]
    CHENG, G. M., GUO, K., ZENG, P., and SUN, Y. M. Development of a two-degree-of-freedom piezoelectric motor using single plate vibrator. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226, 1036–1052 (2011)Google Scholar
  20. [20]
    LI, F. M. and SONG, Z. G. Vibration analysis and active control of nearly periodic two-span beams with piezoelectric actuator/sensor pairs. Applied Mathematics and Mechanics (English Edition), 36, 279–292 (2015) https://doi.org/10.1007/s10483-015-1912-6MathSciNetCrossRefzbMATHGoogle Scholar
  21. [21]
    JAVANBAKHT, M., SHAKERI, M., and SADEGHI, S. N. Dynamic analysis of functionally graded shell with piezoelectric layers based on elasticity. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223, 2039–2047 (2009)Google Scholar
  22. [22]
    AREFI, M., KARROUBI, R., and IRANI-RAHAGHI, M. Free vibration analysis of functionally graded laminated sandwich cylindrical shells integrated with piezoelectric layer. Applied Mathematics and Mechanics (English Edition), 37, 821–834 (2016) https://doi.org/10.1007/s10483-016-2098-9MathSciNetCrossRefGoogle Scholar
  23. [23]
    MOHAMMADIMEHR, M. and ROSTAMI, R. Bending and vibration analyses of a rotating sandwich cylindrical shell considering nanocomposite core and piezoelectric layers subjected to thermal and magnetic fields. Applied Mathematics and Mechanics (English Edition), 39, 1–22 (2018) https://doi.org/10.1007/s10483-018-2301-6MathSciNetCrossRefzbMATHGoogle Scholar
  24. [24]
    WANG, Q., QUEK, S., SUN, C., and LIU, X. Analysis of piezoelectric coupled circular plate. Smart Materials and Structures, 10, 229–239 (2001)CrossRefGoogle Scholar
  25. [25]
    KELESHTERI, M., ASADI, H., and WANG, Q. Large amplitude vibration of FG-CNT reinforced composite annular plates with integrated piezoelectric layers on elastic foundation. Thin-Walled Structures, 120, 203–214 (2017)CrossRefGoogle Scholar
  26. [26]
    WU, N., WANG, Q., and QUEK, S. Free vibration analysis of piezoelectric coupled circular plate with open circuit. Journal of Sound and Vibration, 329, 1126–1136 (2010)CrossRefGoogle Scholar
  27. [27]
    DUAN, W., QUEK, S. T., and WANG, Q. Free vibration analysis of piezoelectric coupled thin and thick annular plate. Journal of Sound and Vibration, 281, 119–139 (2005)CrossRefGoogle Scholar
  28. [28]
    EBRAHIMI, F. and RASTGOO, A. An analytical study on the free vibration of smart circular thin FGM plate based on classical plate theory. Thin-Walled Structures, 46, 1402–1408 (2008)CrossRefGoogle Scholar
  29. [29]
    EBRAHIMI, F. and RASTGOO, A. Free vibration analysis of smart annular FGM plates integrated with piezoelectric layers. Smart Materials and Structures, 17, 015044 (2008)CrossRefGoogle Scholar
  30. [30]
    HASHEMI, S. H., ES’HAGHI, M., and KARIMI, M. Closed-form vibration analysis of thick annular functionally graded plates with integrated piezoelectric layers. International Journal of Mechanical Sciences, 52, 410–428 (2010)CrossRefGoogle Scholar
  31. [31]
    PRAVEEN, G. and REDDY, J. Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. International Journal of Solids and Structures, 35, 4457–4476 (1998)CrossRefzbMATHGoogle Scholar
  32. [32]
    REDDY, J. N. A simple higher-order theory for laminated composite plates. Journal of Applied Mechanics, 51, 745–752 (1984)CrossRefzbMATHGoogle Scholar
  33. [33]
    MOHAMMADZADEH-KELESHTERI, M., ASADI, H., and AGHDAM, M. Geometrical nonlinear free vibration responses of FG-CNT reinforced composite annular sector plates integrated with piezoelectric layers. Composite Structures, 171, 100–112 (2017)CrossRefGoogle Scholar
  34. [34]
    LIU, X., WANG, Q., and QUEK, S. Analytical solution for free vibration of piezoelectric coupled moderately thick circular plates. International Journal of Solids and Structures, 39, 2129–2151 (2002)CrossRefzbMATHGoogle Scholar
  35. [35]
    KELESHTERI, M., ASADI, H., and WANG, Q. On the snap-through instability of post-buckled FG-CNTRC rectangular plates with integrated piezoelectric layers. Computer Methods in Applied Mechanics and Engineering, 331, 53–71 (2018)MathSciNetCrossRefGoogle Scholar
  36. [36]
    MOHAMMADZADEH-KELESHTERI, M., SAMIE-ANARESTANI, S., and ASSADI, A. Large deformation analysis of single-crystalline nanoplates with cubic anisotropy. Acta Mechanica, 228, 3345–3368 (2017)MathSciNetCrossRefzbMATHGoogle Scholar
  37. [37]
    MOHAMMADSALEHI, M., ZARGAR, O., and BAGHANI, M. Study of non-uniform viscoelastic nanoplates vibration based on nonlocal first-order shear deformation theory. Meccanica, 52, 1063–1077 (2017)MathSciNetCrossRefzbMATHGoogle Scholar
  38. [38]
    SHU, C. and DU, H. Implementation of clamped and simply supported boundary conditions in the GDQ free vibration analysis of beams and plates. International Journal of Solids and Structures, 34, 819–835 (1997)CrossRefzbMATHGoogle Scholar
  39. [39]
    TORNABENE, F. and VIOLA, E. Vibration analysis of spherical structural elements using the GDQ method. Computers and Mathematics with Applications, 53, 1538–1560 (2007)MathSciNetCrossRefzbMATHGoogle Scholar
  40. [40]
    ZHAO, X., LEE, Y., and LIEW, K. M. Free vibration analysis of functionally graded plates using the element-free kp-Ritz method. Journal of Sound and Vibration, 319, 918–939 (2009)CrossRefGoogle Scholar
  41. [41]
    HOSSEINI-HASHEMI, S., ES’HAGHI, M., and TAHER, H. R. D. An exact analytical solution for freely vibrating piezoelectric coupled circular/annular thick plates using Reddy plate theory. Composite Structures, 92, 1333–1351 (2010)CrossRefGoogle Scholar
  42. [42]
    FARSANGI, M. A., SAIDI, A., and BATRA, R. Analytical solution for free vibrations of moderately thick hybrid piezoelectric laminated plates. Journal of Sound and Vibration, 332, 5981–5998 (2013)CrossRefGoogle Scholar
  43. [43]
    HASANI, S., SOLEYMANI, A. P., PANJEPOUR, M., and GHAEI, A. A tension analysis during oxidation of pure aluminum powder particles: non-isothermal condition. Oxidation of Metals, 82, 209–224 (2014)CrossRefGoogle Scholar
  44. [44]
    LIEW, K. and LIU, F. L. Differential quadrature method for vibration analysis of shear deformable annular sector plates. Journal of Sound and Vibration, 230, 335–356 (2000)CrossRefGoogle Scholar
  45. [45]
    FARSANGI, M. A. and SAIDI, A. Levy type solution for free vibration analysis of functionally graded rectangular plates with piezoelectric layers. Smart Materials and Structures, 21, 094017 (2012)CrossRefGoogle Scholar

Copyright information

© Shanghai University and Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Mechanical Engineering, College of EngineeringUniversity of TehranTehranIran

Personalised recommendations