Advertisement

Energy-efficient and two-step structure switching scheme based on reference-free for SAR ADC

  • Ruixue Ding
  • Shaopeng Dong
  • Depeng Sun
  • Shubin LiuEmail author
  • Zhangming Zhu
Mixed Signal Letter

Abstract

A novel capacitor switching scheme for successive approximation register analogue-to-digital converters is proposed which can achieve a high energy saving, with only two references, Vref and gnd. Due to the two-step architecture is adopted here, the total capacitance is reduced by 48.44% over the conventional structure. Furthermore, based on the most-significant bit capacitor using split-capacitor procedure and monotonic switching method, the proposed switching scheme achieves 99.74% less switching energy over the conventional architecture. Note that during the design procedure, the complexity of logic and auxiliary power supply circuits are further reduced by the lack of the common voltage (Vcm). Besides the significant energy saving in the switching process, the proposed capacitor architecture also has zero consumption in reset energy. Matlab simulation results show the maximum differential nonlinearity and maximum integral nonlinearity of the proposed scheme are 0.644 LSB and 0.825 LSB.

Keywords

SAR ADC Reference-free Energy-efficiency Area-saving Switching scheme 

Notes

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Nos. 61674118, 61625403, 61874174, 61874173), National Science and Technology Major Project of China (No. 2016ZX03002007), the Science and Technology Fund of Zhejiang Province under Grant 2015C31090.

References

  1. 1.
    Liu, C. C., Chang, S. J., Huang, G. Y., & Lin, Y. Z. (2010). A 10-bit 50-MS/s SAR ADC with a monotonic capacitor switching procedure. IEEE Journal of Solid-State Circuits, 45(4), 731–740.CrossRefGoogle Scholar
  2. 2.
    Yuan, C., & Lam, Y. (2012). Low-energy and area-efficient tri-level switching scheme for SAR ADC. Electronics Letters, 48(9), 482–483.CrossRefGoogle Scholar
  3. 3.
    Zhu, Z., Xiao, Y., & Song, X. (2013). VCM-based monotonic capacitor switching scheme for SAR ADC. Electronics Letters, 49(5), 327–329.CrossRefGoogle Scholar
  4. 4.
    Sanyal, A., & Sun, N. (2013). SAR ADC architecture with 98% reduction in switching energy over conventional scheme. Electronics Letters, 49(4), 248–250.CrossRefGoogle Scholar
  5. 5.
    Ding, Z., Bai, W., & Zhu, Z. (2016). Trade-off between energy and linearity switching scheme for SAR ADC. Analog Integrated Circuits and Signal Processing, 86(1), 121–125.CrossRefGoogle Scholar
  6. 6.
    Gao, J., Guo, W., & Zhu, Z. (2016). Energy-efficient common-mode voltage switching scheme for SAR ADCs. Analog Integrated Circuits and Signal Processing, 89(2), 499–506.CrossRefGoogle Scholar
  7. 7.
    Ding, Z., & Zhu, Z. (2015). High efficiency two-step capacitor switching scheme for SAR ADC. Analog Integrated Circuits and Signal Processing, 86(1), 127–131.CrossRefGoogle Scholar
  8. 8.
    Dmitry, O., & Steffen, P. (2016). Two advanced energy-back SAR ADC architectures with 99.21 and 99.37% reduction in switching energy. Analog Integrated Circuits and Signal Processing, 87(1), 81–91.CrossRefGoogle Scholar
  9. 9.
    Tong, X. Y., Zhang, W. P., & Li, F. X. (2014). Low-energy and area-efficient switching scheme for SAR A/D converter. Analog Integrated Circuits and Signal Processing, 80(1), 153–157.CrossRefGoogle Scholar
  10. 10.
    Osipov, D., & Paul, S. (2016). Two-step reset method for energy efficient SAR ADC switching schemes. Electronics Letters, 52(10), 816–817.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Shaanxi Key Laboratory of Integrated Circuits and Systems, School of MicroelectronicsXidian UniversityXi’anPeople’s Republic of China

Personalised recommendations