Advertisement

A high flow rate thermal bubble-driven micropump with induction heating

  • 575 Accesses

  • 8 Citations

Abstract

A thermal bubble-driven micropump with magnetic induction heating is successfully demonstrated in this paper. Energy is transferred from the planar coil outside the microchamber to the metal heating plate inside the microchamber through the electromagnetic field, and Joule heat is induced by the eddy current in the heating plate. Sequential photographs of bubble nucleation, growth and shrink in open environment were recorded by a CCD camera. One advantage of the micropump is that there is no physical contact between the heating plate and the external power supply circuit, which resulted in an easy fabrication process. What’s more, compared with other thermal bubble-driven micropump with resistive microheater, the flow rate and the pump stroke have been improved significantly due to its larger dimension of the heating plate and larger bubbles volume. The experiments show that the maximum flow rate of this micropump is about 102.05 μL/min, which can expand the potential applications, especially for microfluidic system that requires higher flow rate.

This is a preview of subscription content, log in to check access.

Access options

Buy single article

Instant unlimited access to the full article PDF.

US$ 39.95

Price includes VAT for USA

Subscribe to journal

Immediate online access to all issues from 2019. Subscription will auto renew annually.

US$ 99

This is the net price. Taxes to be calculated in checkout.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

References

  1. Berg AVD, Bergveld P (2006) Labs-on-a-chip: origin, highlights and future perspectives. Lab Chip 6:1266–1273

  2. Bule CR, Kim D, Lister S, Santiago JG (2007) An electro-osmotic fuel pump for direct methanol fuel cells. Electrochem Solid-State Lett 10:196–200

  3. Cheng HP, Chien CP (2006) Ejection interaction of two adjacent micropumps. J Fluids Eng 128:742–750

  4. Cooney CG, Towe BC (2004) A thermopneumatic dispensing micropump. Sens Actuators A 116:519–524

  5. Fadl A, Demming S, Zhang Z, Stephanus B, Mannfred K, Donna ML (2010) A multifunction and bidirectional valve-less rectification micropump based on bifurcation geometry. Microfluid Nanofluid 9:267–280

  6. Iverson BD, Garimella SV (2008) Recent advances in microscale pumping technologies: a review and evaluation. Microfluid Nanofluid 5:145–174

  7. Jun DH, Sim WY, Yang SS (2007) A novel constant delivery thermopneumatic micropump using surface tensions. Sens Actuators A 139:210–215

  8. Jung JY, Kwak HY (2007) Fabrication and testing of bubble powered micropumps using embedded microheater. Microfluid Nanofluid 3:161–169

  9. Kan JW, Yang ZG, Peng TJ, Cheng GM, Wu BD (2005) Design and test of a high-performance piezoelectric micropump for drug delivery. Sens Actuators A 121:156–161

  10. Kim JH, Kang CJ, Kim YS (2004) A disposable polydimethylsiloxane-based diffuser micropump actuated by piezoelectric-disc. Microelectron Eng 71:119–124

  11. Laser DJ, Santiago JG (2004) A review of micropumps. J Micromech Microeng 14:R35–R64

  12. Lee DE, Chen HP, Soper SA, Wang WJ (2003) An electrochemical micropump and its application in a DNA mixing and analysis system. Proc SPIE 4982:264–271

  13. Lemmens RJ, Meng DD (2011) A comparative study on bubble-driven micropumping in microchannels with square and circular cross sections. Sens Actuators A 169:164–170

  14. Liu B, Hou Y, Sun J, Yang J (2016) Study on the effect of heating plate thickness on the micro induction heater for thermal bubbles generation. Microsyst Technol 22:1005–1011

  15. Machauf A, Nemirovsky Y, Dinnar U (2005) A membrane micropump electrostatically actuated across the working fluid. J Micromech Microeng 15:2309–2316

  16. Maxwell RB, Gerhardt AL, Toner M, Gray M, Schmidt MA (2003) A microbubble-powered bioparticle actuator. J Microelectromech Syst 12:630–640

  17. Nguyen B, Kassegne SK (2008) High-current density DC magenetohydrodynamics micropump with bubble isolation and release system. Microfluid Nanofluid 5:383–393

  18. Nguyen NT, Truong TQ (2004) A fully polymeric micropump with piezoelectric actuator. Sens Actuators B 97:137–143

  19. Nisar A, Afzulpurkar N, Mahaisavariya B, Tuantranont A (2008) MEMS-based micropumps in drug delivery and biomedical applications. Sens Actuators B 130:917–942

  20. Osman OO, Shirai A, Kawano S (2015) A numerical study on the performance of micro-vibrating flow pumps using the immersed boundary method. Microfluid Nanofluid 19:595–608

  21. Seibel K, Scholer L, Schafer H, Bohm M (2008) A programmable planar electroosmotic micropump for lab-on-a-chip applications. J Micromech Microeng 18:1–7

  22. Sim WY, Yoon HJ, Jeong OC, Yang SS (2003) A phase-change type micropump with aluminum flap valves. J Micromech Microeng 13:286–294

  23. Teymoori MM, Abbaspour SE (2005) Design and simulation of a novel electrostatic peristaltic micromachined pump for drug delivery applications. Sens Actuators A 117:222–229

  24. Tsai JH, Lin L (2002) A thermal-bubble-actuated micronozzle-diffuser pump. J Microelectromech Syst 11:665–671

  25. Yin Z, Prosperetti A (2005) ‘Blinking bubble’ micropump with microfabricated heaters. J Micromech Microeng 15:1683–1691

  26. Yokoyama Y, Takeda M, Umemoto T, Ogushi T (2004) Thermal micro pump for a loop-type micro channel[J]. Sens Actuators A 111:123–128

  27. Zeng SL, Chen CH, Mikkelsen JC, Santiago JG (2001) Fabrication and characterization of electoosmotic micropumps. Sens Actuators B 79:107–114

  28. Zhang K, Jian A, Zhang X, Wang Y, Li Z, Tam H (2011) Laser-induced thermal bubbles for microfluidic applications. Lab Chip 11:1389–1395

Download references

Acknowledgements

This work was partially supported by the China Scholarship Council and National Natural Science Foundation of China (No. 51105011).

Author information

Correspondence to Bendong Liu.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (WMV 2439 kb)

Supplementary material 2 (WMV 2702 kb)

Supplementary material 1 (WMV 2439 kb)

Supplementary material 2 (WMV 2702 kb)

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Liu, B., Sun, J., Li, D. et al. A high flow rate thermal bubble-driven micropump with induction heating. Microfluid Nanofluid 20, 155 (2016) doi:10.1007/s10404-016-1822-2

Download citation

Keywords

  • Bubble
  • Micropump
  • Microfluidics
  • Phase change
  • Induction heating