Impacts of dynamic degradation on the morphological and mechanical characterisation of porous magnesium scaffold
- 42 Downloads
This study employs a computational approach to analyse the impact of morphological changes on the structural properties of biodegradable porous Mg subjected to a dynamic immersion test for its application as a bone scaffold. Porous Mg was immersed in a dynamic immersion test for 24, 48, and 72 h. Twelve specimens were prepared and scanned using micro-CT and then reconstructed into a 3D model for finite element analysis. The structural properties from the numerical simulation were then compared to the experimental values. Correlations between morphological parameters, structural properties, and fracture type were then made. The relative losses were observed to be in agreement with relative mass loss done experimentally. The degradation rates determined using exact (degraded) surface area at particular immersion times were on average 20% higher than the degradation rates obtained using original surface area. The dynamic degradation has significantly impacted the morphological changes of porous Mg in volume fraction, surface area, and trabecular separation, which in turn affects its structural properties and increases the immersion time.
KeywordsDynamic immersion test Finite element analyses Dynamic degradation Porous magnesium Morphological parameters
This project was sponsored by Universiti Teknologi Malaysia (UTM) via the Potential Academic Staff (PAS) Grant scheme (Q.J130000.2724.03K09). The authors would like to thank the Research Management Centre, Universiti Teknologi Malaysia (UTM), for managing the project. Several authors of this present study are financially supported by the HIR-MOHE research grant initiative.
Compliance with ethical standards
Conflict of interest
The authors declare no conflict of interest.
- Enyedi B, Konyha L, Fazekas K (2005) Threshold procedures and image segmentation. In: 47th international symposium ELMAR, 2005. IEEE, pp 29–32Google Scholar
- Feyerabend F (2014) Biomaterials for bone regeneration. Woodhead Publishing Limited, SawstonGoogle Scholar
- Geng F, Tan L, Zhang B et al (2009) Study on beta-TCP coated porous Mg as a Bone tissue engineering scaffold material. J Mater Sci Technol 25:123–129Google Scholar
- Gu X, Zheng Y, Cheng Y et al (2009) In vitro corrosion and biocompatibility of binary magnesium alloys. Biomaterials 30:484–498. https://doi.org/10.1016/j.biomaterials.2008.10.021 CrossRefGoogle Scholar
- Hedberg EL, Shih CK, Lemoine JJ et al (2005) In vitro degradation of porous poly(propylene fumarate)/poly(dl-lactic-co-glycolic acid) composite scaffolds. Biomaterials 26:3215–3225. https://doi.org/10.1016/J.BIOMATERIALS.2004.09.012 CrossRefGoogle Scholar
- Milan J, Planell JA, Lacroix D (2009) Biomaterials computational modelling of the mechanical environment of osteogenesis within a polylactic acid—calcium phosphate glass scaffold. Biomaterials 30:4219–4226. https://doi.org/10.1016/j.biomaterials.2009.04.026 CrossRefGoogle Scholar
- Planell JA, Lacroix D, Olivares AL (2009) Biomaterials finite element study of scaffold architecture design and culture conditions for tissue engineering. 30:6142–6149. https://doi.org/10.1016/j.biomaterials.2009.07.041 Google Scholar
- Staiger MP, Pietak AM, Huadmai J, Dias G (2006) Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 27:1728–1734. https://doi.org/10.1016/j.biomaterials.2005.10.003 CrossRefGoogle Scholar
- Williams AFO, McCullough MBA (2015) Micro-computed tomography to finite element analysis of in vivo biodegradable magnesium-alloy screw and surrounding bone in rabbit femurs. In: Volume 14: emerging technologies; safety engineering and risk analysis; materials: genetics to structures. ASME, pp. V014T11A035; 9 pages. https://doi.org/10.1115/IMECE2015-52790