Advertisement

Journal of Material Cycles and Waste Management

, Volume 21, Issue 1, pp 191–200 | Cite as

Generation rates and current management of municipal, construction and demolition wastes in Tehran

  • Monireh Majlessi
  • Mirzaman Zamanzadeh
  • Nadali Alavi
  • Nazak Amanidaz
  • Reza Bakhshoodeh
REGIONAL CASE STUDY
  • 61 Downloads

Abstract

Lack of reliable data is one of the most important constraints of solid waste management. We investigated generation rates of solid waste in Tehran and the factors affecting generation rates. Data were collected from the statistical center of Tehran Waste Management Organization (TWMO). The data analysis showed that the municipal solid waste (MSW) generation was increased from 2006 to 2012; however, because of a decline in gross domestic production (GDP) per capita, a decline of the MSW generation was observed between 2012 and 2014. The correlation coefficient between the total MSW and GDP was 0.91. Thus, the MSW generation rate in Tehran was highly correlated with the GDP per capita and the rate was predictable with a high confidence. The MSW per capita per day in Tehran was 0.96 kg and 76% of the MSW was landfilled. Construction and demolition (C&D) wastes per capita per day was 5.2 kg and 81% of them were landfilled. A low recycling rate indicated that the education programs and/or public participation for waste reduction and recycling in recent years have not been efficient and a revision should be made to the current program.

Keywords

Current management Generation of MSW C&D waste Tehran 

Abbreviations

C&D

Construction and demolition

GDP

Gross domestic production

MFA

Material flow analysis

MSW

Municipal solid waste

NGO

Non-governmental organization

SSW

Source-separated waste

SWM

Solid waste management

TWMO

Tehran Waste Management Organization

WTE

Waste-to-energy

Notes

Acknowledgements

This study was funded by Student Research Committee, Shahid Beheshti University of Medical Science, Tehran, Iran, project no. 1395-66100. We would like to appreciate the “Student Research Committee” and “Research & Technology Chancellor” in Shahid Beheshti University of Medical Sciences for the financial support of this study and TWMO for their support and collaboration in data collection.

References

  1. 1.
    Alavi N et al (2015) Waste electrical and electronic equipment (WEEE) estimation: a case study of Ahvaz City, Iran. J Air Waste Manag Assoc 65(3):298–305CrossRefGoogle Scholar
  2. 2.
    Rahmat ZG et al (2017) Landfill site selection using GIS and AHP: a case study: Behbahan, Iran. KSCE J Civil Eng 21(1):111–118CrossRefGoogle Scholar
  3. 3.
    Arena U (2012) Process and technological aspects of municipal solid waste gasification. A review. Waste Manag 32(4):625–639CrossRefGoogle Scholar
  4. 4.
    Metin E, Eröztürk A, Neyim C (2003) Solid waste management practices and review of recovery and recycling operations in Turkey. Waste Manag 23(5):425–432CrossRefGoogle Scholar
  5. 5.
    Abduli MA, Tavakolli H, Azari A (2013) Alternatives for solid waste management in Isfahan, Iran: a case study. Waste Manag Res 31(5):532–537CrossRefGoogle Scholar
  6. 6.
    Cochran K, Townsend T (2010) Estimating construction and demolition debris generation using a materials flow analysis approach. Waste Manag 30(11):2247–2254CrossRefGoogle Scholar
  7. 7.
    Arena U, Di Gregorio F (2014) A waste management planning based on substance flow analysis. Resour Conserv Recycl 85:54–66CrossRefGoogle Scholar
  8. 8.
    Shekdar AV (2009) Sustainable solid waste management: an integrated approach for Asian countries. Waste Manag 29(4):1438–1448CrossRefGoogle Scholar
  9. 9.
    Windfeld ES, Brooks MS-L (2015) Medical waste management—a review. J Environ Manag 163:98–108CrossRefGoogle Scholar
  10. 10.
    Mutha NH, Patel M, Premnath V (2006) Plastics materials flow analysis for India. Resour Conserv Recycl 47(3):222–244CrossRefGoogle Scholar
  11. 11.
    Hoornweg D, Bhada-Tata P, Kennedy C (2015) Peak waste: When is it likely to occur? J Ind Ecol 19(1):117–128CrossRefGoogle Scholar
  12. 12.
    Abdulla M et al (2016) The importance of quantifying food waste in Canada. J Agric Food Syst Commun Dev 3(2):137–151Google Scholar
  13. 13.
    SCI (2014) Selected results of national population and housing census. Statistical Center of Iran, TehranGoogle Scholar
  14. 14.
    Malmir T, Tojo Y (2016) Municipal solid waste management in Tehran: changes during the last 5 years. Waste Manag Res 34(5):449–456CrossRefGoogle Scholar
  15. 15.
    TWBG (2014) World Bank national accounts data. T.W.B. Group, Editor Washington.Google Scholar
  16. 16.
    Savage GM, Diaz LF (1990) Processing of solid waste for material recovery. In American Society of Mechanical Engineers 14th National Waste Processing Conference, Long Beach, California, USAGoogle Scholar
  17. 17.
    TWMO (2014) MSW generation rate in municipal solid waste T.W.M. Organization, Editor TehranGoogle Scholar
  18. 18.
    da Cruz NF et al (2014) Packaging waste recycling in Europe: is the industry paying for it? Waste Manag 34(2):298–308CrossRefGoogle Scholar
  19. 19.
    Kinnaman TC (2009) The economics of municipal solid waste management. Waste Manag, p. 2615Google Scholar
  20. 20.
    TE, Iran GDP Per Capita Growth (Annual %) (2014) Trading Economics: New YorkGoogle Scholar
  21. 21.
    Mavrotas G et al (2015) Municipal solid waste management and energy production: consideration of external cost through multi-objective optimization and its effect on waste-to-energy solutions. Renew Sustain Energy Rev 51:1205–1222CrossRefGoogle Scholar
  22. 22.
    Sang-Arun J, Bengtsson M (2012) Sustainable solid waste management for developing Asian countries: a case study of Phitsanulok Municipality, Thailand. In: Handbook of sustainability management. World Scientific, Singapore, pp 555–574Google Scholar
  23. 23.
    Babaei AA et al (2015) Household recycling knowledge, attitudes and practices towards solid waste management. Resour Conserv Recycl 102:94–100CrossRefGoogle Scholar
  24. 24.
    Guerrero LA, Maas G, Hogland W (2013) Solid waste management challenges for cities in developing countries. Waste Manag 33(1):220–232CrossRefGoogle Scholar
  25. 25.
    Troschinetz AM, Mihelcic JR (2009) Sustainable recycling of municipal solid waste in developing countries. Waste Manag 29(2):915–923CrossRefGoogle Scholar
  26. 26.
    Jamshidi A, Taghizadeh F, Ata D (2011) Sustainable municipal solid waste management (case study: Sarab County, Iran). Ann Environ Sci 5(1):7Google Scholar
  27. 27.
    Saghafi MD, Teshnizi ZAH (2011) Building deconstruction and material recovery in Iran: an analysis of major determinants. Proc Eng 21:853–863CrossRefGoogle Scholar
  28. 28.
    Nasrabadi T, Mohammadnejad S (2008) Evaluating citizen attitudes and participation in solid wasteGoogle Scholar
  29. 29.
    Coelho A, De Brito J (2012) Influence of construction and demolition waste management on the environmental impact of buildings. Waste Manag 32(3):532–541CrossRefGoogle Scholar
  30. 30.
    Turan NG et al (2009) Municipal solid waste management strategies in Turkey. Waste Manag 29(1):465–469CrossRefGoogle Scholar
  31. 31.
    Tchobanoglous G, Kreith F, Williams ME (2002) Handbook of solid waste management, 2nd Edition edn. McGraw-Hill, New YorkGoogle Scholar
  32. 32.
    Asgari A et al (2017) Quality and quantity of construction and demolition waste in Tehran. J Environ Health Sci Eng 15(1):14MathSciNetCrossRefGoogle Scholar
  33. 33.
    Llatas C (2011) A model for quantifying construction waste in projects according to the European waste list. Waste Manag 31(6):1261–1276CrossRefGoogle Scholar
  34. 34.
    Esin T, Cosgun N (2005) Ecological analysis of reusability and recyclability of modified building materials and components at use phase of residential buildings in Istanbul. in Istanbul: UIA ISTANBUL XXII World Congress of Architecture-Cities: Grand Bazaar of ArchitecturesGoogle Scholar
  35. 35.
    Ferguson J (1995) Managing and minimizing construction waste: a practical guide. Thomas TelfordGoogle Scholar
  36. 36.
    Brodersen J, Juul J, Jacobsen H (2002) Review of selected waste streams: sewage sludge, construction and demolition waste, waste oils, waste from coal-fired power plants and biodegradable municipal waste, in Review of selected waste streams: sewage sludge, construction and demolition waste, waste oils, waste from coal-fired power plants and biodegradable municipal waste. EEAGoogle Scholar

Copyright information

© Springer Japan KK, part of Springer Nature 2018

Authors and Affiliations

  • Monireh Majlessi
    • 1
    • 2
  • Mirzaman Zamanzadeh
    • 3
  • Nadali Alavi
    • 1
    • 2
  • Nazak Amanidaz
    • 2
    • 4
    • 5
  • Reza Bakhshoodeh
    • 6
  1. 1.Environmental and Occupational Hazards Control Research CenterShahid Beheshti University of Medical SciencesTehranIran
  2. 2.Department of Environmental Health Engineering, School of Public HealthShahid Beheshti University of Medical SciencesTehranIran
  3. 3.Department of Environmental Health Engineering, School of Public HealthTehran University of Medical SciencesTehranIran
  4. 4.Student Research Committee, School of Public HealthShahid Beheshti University of Medical SciencesTehranIran
  5. 5.Environmental Health Research CenterGolestan University of Medical SciencesGolestanIran
  6. 6.Department of Water Science Engineering, School of Environmental EngineeringShahid Chamran UniversityAhvazIran

Personalised recommendations