Advertisement

LCA evaluation of packaging re-use: the steel drums case study

  • Laura BiganzoliEmail author
  • Lucia Rigamonti
  • Mario Grosso
SPECIAL FEATURE: ORIGINAL ARTICLE The 4th International Conference on Final Sinks (4th ICFS 2017)

Abstract

Re-use of packaging items plays a key role in the achievement of sustainable management of the resources. The aim of this study is to assess the environmental impacts associated with the life cycle of steel drums used for carrying chemical and petrochemical products as a function of the number of uses (the so-called “rotations”), by means of the life cycle assessment (LCA) methodology. The results show that the impacts of the life cycle of the steel drums mainly come from their manufacturing, whereas the reconditioning process accounts for less than 20% of the overall impacts. Moreover, a system where the drums are reconditioned and re-used has better environmental performance than a system where the same drums are used only once and then sent to recycling. The advantages of such a system increase with the number of rotations. For example, in case just two rotations take place, the environmental impacts of a system based on re-use are on average about 74% of those of a single-use system, and drop to 53% if the number of uses increases to 10. The behavior of the drums users is thus very important to prevent excessive damage that will make reconditioning impossible.

Keywords

Re-use Steel drums LCA Circular economy Italy 

Supplementary material

10163_2018_817_MOESM1_ESM.docx (2.7 mb)
Supplementary material 1 (DOCX 2768 KB)

References

  1. 1.
    European Commission (2015) COM (2015) 614/2 communication from the commission to the European parliament, the council, the European economic and social committee of the regions: closing the loop—an EU action plan for the circular economy. https://ec.europa.eu/transparency/regdoc/rep/1/2015/EN/1-2015-614-EN-F1-1.PDF. Accessed 10 Dec 2018
  2. 2.
    European Commission (2008) Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives. Off J Eur Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=celex%3A32008L0098. Accessed 10 Dec 2018
  3. 3.
    Koskela S, Dahlbo H, Judl J, Korhonen MR (2014) Reusable plastic crate or recyclable cardboard box? A comparison of two delivery systems. J Clean Prod 69:83–90CrossRefGoogle Scholar
  4. 4.
    Ross S, Evans D (2003) The environmental effect of reusing and recycling a plastic-based packaging system. J Clean Prod 11:561–571CrossRefGoogle Scholar
  5. 5.
    UNEP (2014) Global guidance principles for life cycle assessment databases. A basis for greener processes and products. https://www.lifecycleinitiative.org/wp-content/uploads/2012/12/2011%20-%20Global%20Guidance%20Principles.pdf. Accessed 10 Dec 2018
  6. 6.
    Levi M, Cortesi S, Vezzoli C, Salvia G (2011) A comparative life cycle assessment of disposable and reusable packaging for the distribution of Italian fruit and vegetables. Packag Technol Sci 24:387–400CrossRefGoogle Scholar
  7. 7.
    Raugei M, Fullana-i-palmer P, Puig R, Torres A (2009) A comparative life cycle assessment of single-use fibre drums versus reusable steel drums. Packag Technol Sci 22:443–450CrossRefGoogle Scholar
  8. 8.
    Albrecht S, Brandsetter P, Beck T, Fullana-i-palmer P, Gronman K, Baitz M, Deimling S, Sandilands J, Fischer M An extended life cycle analysis of packaging system for fruit and vegetable transport in Europe. Int J Life Cycle Assess 18:1549–1567Google Scholar
  9. 9.
    Singh SP, Chonhenchob V, Singh J (2006) Life cycle inventory and analysis of re-usable plastic containers and display-ready corrugated containers used for packaging fresh fruits and vegetables. Packag Technol Sci 19:279–293CrossRefGoogle Scholar
  10. 10.
    Tua C, Nessi S, Rigamonti L, Dolci G, Grosso M (2017) Packaging waste prevention in the distribution of fruit and vegetables: an assessment based on the life cycle perspective. Waste Manag Res 35:400–415CrossRefGoogle Scholar
  11. 11.
    Manuilova A (2003) Life cycle assessment of industrial packaging for chemicals. Master degree at Chalmers University of TechnologyGoogle Scholar
  12. 12.
    Lee SG, Xu X (2004) A simplified life cycle assessment of re-usable and single-use bulk transit packaging. Packag Technol Sci 17:67–83CrossRefGoogle Scholar
  13. 13.
    RICREA (2014) Relazione sulla Gestione e bilancio 2013—Programma Specifico di Prevenzione 2014–2016 (in Italian) Google Scholar
  14. 14.
    Eurpean Commission—Joint Research Centre (2010) ILCD handbook—general guide for life cycle assessment—detailed giudance. http://eplca.jrc.ec.europa.eu/uploads/ILCD-Handbook-General-guide-for-LCA-DETAILED-GUIDANCE-12March2010-ISBN-fin-v1.0-EN.pdf. Accessed 10 Dec 2018
  15. 15.
    Finnveden G, Haischild MZ, Ekvall T, Giunée J, Heijungs R, Hellweg S (2009) Recent developments in life cycle assessment. J Enviro Manag 91:1–21CrossRefGoogle Scholar
  16. 16.
    European Commission (2013) Commission recommendation of 9 April 2013 on the use of common methods to measure and communicate the life cycle environmental performance of products and organisations (2013/179/EU). Off J Eur Union. https://publications.europa.eu/en/publication-detail/-/publication/93cb8358-b80d-11e2-ab01-01aa75ed71a1/language-en. Accessed 10 Dec 2018
  17. 17.
    Hischier R, Weidema B, Althaus HJ, Bauer C, Doka G, Dones R, Frischknecht R, Hellweg S, Humbert S, Jungbluth N, Kollner T, Loerincik Y, Margni M, Nemecek T (2010) Implementation of life cycle impact assesment method. ecoinvent report N.3, v.2.2. Swiss Centre for Life Cycle Inventories, DubendorfGoogle Scholar
  18. 18.
    Ernst, Young Accountants LLP, Rietveld E, Hegger S (2014) Life cycle assessment of newly manufactured and reconditioned industrial packaging. http://www.reusablepackaging.org/wpcontent/uploads/Life-Cycle-Analysis-Report-2014.pdf. Accessed 10 Dec 2018 (in Italian)
  19. 19.
    ACI (2015) Autoritratto 2014. http://www.aci.it/laci/studi-e-ricerche/dati-estatistiche/autoritratto/autoritratto-2014.html. Accessed 10 Dec 2018 (in Italian)
  20. 20.
    Fortom C (2010) Il recupero di solventi e altri chemicals nel ciclo energetico. Prima conferenza nazionale su chimica ed energia, Milano, 19 ottobre 2010. http://federchimicaold.federchimica.it/docs/default-source/eventi-1010-1conferenzanazionalechimicaenergia/Angelo_Forestan_FortomChimica.pdf?sfvrsn=0. Accessed 10 Dec 2018
  21. 21.
    Rigamonti L, Grosso M, Sunseri MC (2009) Influence of assumptions about selection and recycling efficiencies on the LCA of integrated waste management system. Int J Life Cycle Assess 14:5:411–419CrossRefGoogle Scholar
  22. 22.
    Zampori L, Pant R, De Schryver A (2016) End of life dataset, quality ratios. Slides prepared for the 4th meeting of thepackaging working groupGoogle Scholar
  23. 23.
    Rigamonti L, Grosso M, Niero M (2017) A methodology to assess the quality of recovered materials compared to virgin ones in Life Cycle Assessment studies. Slides presented at the 17th Environmental Footprint. Joint Technical Advisory Board and Steering Committee meeting, Bruxelles, 30 May 2017Google Scholar
  24. 24.
    World Steel Association (2017) Steel in the circular economy: a life cycle perspective. https://www.worldsteel.org/en/dam/jcr:00892d89-551e-42d9-ae68-abdbd3b507a1/Steel+in+the+circular+economy+-+A+life+cycle+perspective.pdf. Accessed 28 Mar 2017

Copyright information

© Springer Japan KK, part of Springer Nature 2018

Authors and Affiliations

  • Laura Biganzoli
    • 1
    Email author
  • Lucia Rigamonti
    • 1
  • Mario Grosso
    • 1
  1. 1.Department of Civil and Environmental EngineeringPolitecnico di MilanoMilanoItaly

Personalised recommendations