Journal of Material Cycles and Waste Management

, Volume 20, Issue 2, pp 1248–1256 | Cite as

Pulverization of fibrous mineral wool waste

  • J. Yliniemi
  • O. Laitinen
  • P. Kinnunen
  • M. Illikainen
ORIGINAL ARTICLE
  • 106 Downloads

Abstract

The total annual volume of mineral wool waste in the 27 European Union countries is expected to increase to 2.5 million tons per year by 2020. Unfortunately, mineral wool wastes are often considered unrecyclable, because their physical characteristics make them difficult to process. In many cases, the problem is caused by the material’s fibrousness. However, no studies have considered comminution methods for mineral wools. The objective of the present study is to investigate how various comminution mechanisms affect mineral wools’ physical characteristics, including appearance, bulk density, and fiber length and width. The study’s results show that compression-based methods (vibratory disc mill and hydraulic press) completely break down mineral wools’ fibrousness, whereas methods based on high cutting speeds affect bulk density and fiber length only moderately. In addition, the present study identifies a rapid method that can be used in a novel way to analyze a large number of mineral wool fibers.

Keywords

Man made vitreous fiber (MMVF) Mineral wool fiber Comminution Milling Fiber conversion 

Notes

Acknowledgements

This work was conducted under the auspices of the Geodesign Project, supported by the Finnish Funding Agency for Technology and Innovation (Tekes) and various companies (Boliden Harjavalta Oy, Destamatic Oy, Fortum Power and Heat Oy, Paroc Group Oy, Saint-Gobain Rakennustuotteet Oy, and Suomen Erityisjäte Oy). Jarno Karvonen, Elisa Wirkkala, and Jani Österlund are acknowledged for their contributions to the laboratory analyses. Special thanks to Pontus Lindberg (Paroc Group Oy) for his valuable advice on the comminution experiments.

Supplementary material

10163_2017_692_MOESM1_ESM.tif (640 kb)
Supplementary material 1 (TIF 640 KB)
10163_2017_692_MOESM2_ESM.tif (787 kb)
Supplementary material 2 (TIF 786 KB)
10163_2017_692_MOESM3_ESM.tif (703 kb)
Supplementary material 3 (TIF 703 KB)
10163_2017_692_MOESM4_ESM.tif (406 kb)
Supplementary material 4 (TIF 405 KB)
10163_2017_692_MOESM5_ESM.tif (415 kb)
Supplementary material 5 (TIF 414 KB)
10163_2017_692_MOESM6_ESM.tif (1.3 mb)
Supplementary material 6 (TIF 1284 KB)
10163_2017_692_MOESM7_ESM.tif (882 kb)
Supplementary material 7 (TIF 882 KB)
10163_2017_692_MOESM8_ESM.tif (1.1 mb)
Supplementary material 8 (TIF 1171 KB)
10163_2017_692_MOESM9_ESM.doc (34 kb)
Supplementary material 9 (DOC 33 KB)

References

  1. 1.
    Müller A, Leydolph B, Stanelle K (2009) Recycling mineral wool waste—technologies for the conversion of the fiber structure part 1. Interceram 2009:378–381Google Scholar
  2. 2.
    Papadopoulos AM (2005) State of the art in thermal insulation materials and aims for future developments. Energy Build 37:77–86.  https://doi.org/10.1016/j.enbuild.2004.05.006 CrossRefGoogle Scholar
  3. 3.
    Väntsi O, Kärki T (2013) Mineral wool waste in Europe: a review of mineral wool waste quantity, quality, and current recycling methods. J Mater Cycles Waste Manag 2013:1–11.  https://doi.org/10.1007/s10163-013-0170-5 Google Scholar
  4. 4.
    Pranckevičienė J (2011) Impact of mineral wool production waste on properties of sintered ceramics. Dissertation, VGTU leidykla Technika&#8221Google Scholar
  5. 5.
    Kizinievič O, Balkevičius V, Pranckevičienė J, Kizinievič V (2014) Investigation of the usage of centrifuging waste of mineral wool melt (CMWW), contaminated with phenol and formaldehyde, in manufacturing of ceramic products. Waste Manag.  https://doi.org/10.1016/j.wasman.2014.01.010 Google Scholar
  6. 6.
    Cheng A, Lin W-T, Huang R (2011) Application of rock wool waste in cement-based composites. Mater Des 32:636–642.  https://doi.org/10.1016/j.matdes.2010.08.014 CrossRefGoogle Scholar
  7. 7.
    Hagerman RM (1987) Mineral wool waste cement. PatentGoogle Scholar
  8. 8.
    Lin W-T, Han T-Y, Huang C-C et al (2012) Using rock wool wastes as partial replacement of cement in cement-based composites. Adv Sci Lett 8:489–494CrossRefGoogle Scholar
  9. 9.
    Väntsi O, Kärki T (2014) Utilization of recycled mineral wool as filler in wood–polypropylene composites. Constr Build Mater 55:220–226.  https://doi.org/10.1016/j.conbuildmat.2014.01.050 CrossRefGoogle Scholar
  10. 10.
    Felegi J Jr, Kehrer KP (1990) Composite fiberboard and process of manufacture. PatentGoogle Scholar
  11. 11.
    Ali MH (1985) Fire resistant gypsum board containing mineral wool fibers and method. PatentGoogle Scholar
  12. 12.
    Cadotfe JE, Cadotfe JE (1970) Production of water-laid felted mineral fiber panels including use of flocculating agent. PatentGoogle Scholar
  13. 13.
    Long WJ (1984) Mineral fiber-containing paper for the production of gypsum wallboard. PatentGoogle Scholar
  14. 14.
    Talling BLO, Sarudis M (1995) Raw material briquette for mineral wool production and process for its preparation and its use. PatentGoogle Scholar
  15. 15.
    Heinelt W (1996) Method and apparatus for treating mineral wool wastes. PatentGoogle Scholar
  16. 16.
    Dunster A (2007) Characterisation of mineral wastes, resources and processing technologies—integrated waste management for production of construction material. Case Study: waste mineral fiber in ceiling tile manufacture Report WRT 177/WR0115. http://www.smartwaste.co.uk/filelibrary/Ceiling_tiles_waste_mineral_wool.pdf. Accessed 11 Jan 2017
  17. 17.
    Yliniemi J, Kinnunen P, Karinkanta P, Illikainen M (2016) Utilization of mineral wools as alkali-activated material precursor. Materials 9:312CrossRefGoogle Scholar
  18. 18.
    Kinnunen P, Yliniemi J, Talling B, Illikainen M (2017) Rockwool waste in fly ash geopolymer composites. J Mater Cycles Waste Manag 19:1220–1227CrossRefGoogle Scholar
  19. 19.
    Müller A, Leydolph B, Stanelle K (2010) Recycling mineral wool waste—technologies for the conversion of the fiber structure, part 2. Interceram 59:39–45Google Scholar
  20. 20.
    Širok B, Blagojević B, Bullen P (2008) 8—applying the visualisation method to measuring the thickness of mineral wool fibres. In: Mineral wool. Woodhead publishing series in metals and surface engineering, pp 106–112.  https://doi.org/10.1533/9781845694456.106
  21. 21.
    Suopajärvi T, Kekäläinen K, Illikainen M, Niinimaki J (2009) Effect of high intensity treatment on mechanical properties of low consistency pulp. In: Proceedings of TAPPI EPE, pp 1–11Google Scholar
  22. 22.
  23. 23.
    Retsch R (2017) Vibratory Disc Mill RS 200—Retsch—high end fineness and speed. http://www.retsch.com/products/milling/disc-mills/rs-200. Accessed 10 Jan 2017
  24. 24.
    SFS EN 1097-3 (1998) Tests for mechanical and physical properties of aggregates. Part 3: determination of loose bulk density and voidsGoogle Scholar
  25. 25.
    SFS EN 1237 (1995) Fertilizers. Determination of bulk density (tapped)Google Scholar
  26. 26.
    Kekäläinen K (2016) Microfibrillation of pulp fibres. The effects of compression-shearing, oxidation and thermal drying. Doctoral thesis, University of OuluGoogle Scholar
  27. 27.
    Laitinen O, Kemppainen K, Stoor T, Niinimäki J (2011) Fractionation of pulp and paper particles selectively by size. BioResources 6:672–685Google Scholar
  28. 28.
    Laitinen O, Niinimaki J (2014) Fractional study of the microfibrillated cellulose. Tappi J 13:49–55Google Scholar
  29. 29.
    Laitinen O, Joensuu I, Niskanen T, Niinimäki J (2014) Analysis of the external fibrillation. Int Papwirtsch 57:46–52Google Scholar
  30. 30.
    Karinkanta P, Laitinen O (2017) Use of tube flow fractionation in wood powder characterization. Biomass Bioenergy 99:122–138CrossRefGoogle Scholar
  31. 31.
    Yilmaz S, Özkan O, Günay V (1996) Crystallization kinetics of basalt glass. Ceram Int 6:477–481CrossRefGoogle Scholar
  32. 32.
    Achchaq F, Djellab K, Beji H (2009) Hydric, morphological and thermo-physical characterization of glass wools: from macroscopic to microscopic approach. Constr Build Mater 10:3214–3219CrossRefGoogle Scholar

Copyright information

© Springer Japan KK, part of Springer Nature 2017

Authors and Affiliations

  • J. Yliniemi
    • 1
  • O. Laitinen
    • 1
  • P. Kinnunen
    • 1
    • 2
  • M. Illikainen
    • 1
  1. 1.Fiber and Particle Engineering Research UnitUniversity of OuluOuluFinland
  2. 2.Department of Civil and Environmental EngineeringImperial College LondonLondonUK

Personalised recommendations