Advertisement

Journal of Marine Science and Technology

, Volume 20, Issue 2, pp 213–225 | Cite as

Experimental study of a hybrid mooring system

  • Chunyan Ji
  • Zhiming YuanEmail author
Original article

Abstract

Mooring systems are essential to the floating structures including offshore platforms, wave energy converters and floating breakwaters. As floating structures propagate towards deeper waters, the design of the mooring systems needs to be revamped. In the present study, a new hybrid mooring system has been proposed. A series of weights and buoys are arranged to the different segments of each mooring line in order to improve the motion performance of the platform and eliminate the vertical forces at the lower end of the mooring lines. A series of experiments have been carried out at CSSRC wave basin for a semi-submersible platform moored by the mooring lines with or without the weights and buoys. The mooring lines’ tension and 6-DOF motions of the platform were measured. Discussions have been made on non-linear motion responses of the semi-submersible and non-linear mooring line tension responses for various mooring conditions.

Keywords

Hybrid mooring system Mooring lines Clump weights Buoys 

Notes

Acknowledgments

This study was supported financially by the National Natural Science and Foundation of China (Grant No. 51379095) and the National Basic Research Program of China (973 Program) (Grant No. 2013CB36100).

Supplementary material

Supplementary material 1 (AVI 20754 kb)

773_2014_260_MOESM2_ESM.dav (153.2 mb)
Supplementary material 2 (DAV 156833 kb)

References

  1. 1.
    Brook AK (1985) The design of catenary mooring systems for offshore vessels. In: Dyke PPG, Moscardini AO, Robson EH (eds) Offshore and coastal modelling, vol 12. Springer, New York, pp 303–322Google Scholar
  2. 2.
    Patel MH, Brown DT (1987) Analysis and design of catenary mooring systems. Economics of floating production systems: proceedings of an International conference, London, UKGoogle Scholar
  3. 3.
    Johnsen JM (1999) Design and optimization of taut-leg mooring systems. Offshore technology conference, Houston, TexasGoogle Scholar
  4. 4.
    Del Vecchio CJ (1996) Taut leg mooring systems based on polyester fiber ropes—Petrobas’ experience and future developments. International conference on mooring and anchoring, Aberdeen, UKGoogle Scholar
  5. 5.
    Smith RJ, MacFarlane CJ (2001) Statics of a three component mooring line. Ocean Eng 28:899–914CrossRefGoogle Scholar
  6. 6.
    Vicente PC, Falcão AF, Justino PJ (2011) Slack-chain mooring configuration analysis of a floating wave energy converter. 26th International workshop on water waves and floating bodies, Athens, GreeceGoogle Scholar
  7. 7.
    Hong SW, Kim JH (2004) Experimental study of a compliant mooring system for a floating OWC device, proceeding of the Fourteenth international offshore and polar engineering conference, Toulon, FranceGoogle Scholar
  8. 8.
    Ji CY, Yuan ZM, Chen ML (2011) Study on a new mooring system integrating catenary with taut mooring. China Ocean Eng 25(3):427–440CrossRefGoogle Scholar
  9. 9.
    Yuan ZM, Ji CY, Chen ML, Zhang Y (2011) Coupled analysis of floating structures with a new mooring system. 30th International conference on Ocean, offshore and arctic Engineering, OMAE2011-49597, Rotterdam, The NetherlandsGoogle Scholar
  10. 10.
    Zhang H, Gao W, Wang Q, Jiang J, Zhao Z (2012) Investigation on optimization design of an equivalent water depth truncated mooring system based on INSGA-II. J Mar Sci Appl 11(2):208–215CrossRefGoogle Scholar

Copyright information

© JASNAOE 2014

Authors and Affiliations

  1. 1.School of Naval Architecture and Ocean EngineeringJiangsu University of Science and TechnologyZhenjiangChina
  2. 2.Department of Naval Architecture, Ocean and Marine EngineeringUniversity of StrathclydeGlasgowUK

Personalised recommendations