Advertisement

Amino Acids

pp 1–13 | Cite as

Non-isocyanate urethane linkage formation using l-lysine residues as amine sources

  • Cláudia Peixoto
  • Ana M. S. SoaresEmail author
  • Andreia Araújo
  • Bradley D. Olsen
  • Ana V. Machado
Original Article
  • 38 Downloads

Abstract

Bio-based polyurethane materials are broadly applied in medicine as drug delivery systems. Nevertheless, their synthesis comprises the use of petroleum-based toxic amines, isocyanates and polyols, and their biocompatibility or functionalization is limited. Therefore, the use of lysine residues as amine sources to create non-isocyanate urethane (NIU) linkages was investigated. Therefore, a five-membered biscyclic carbonate (BCC) was firstly synthetized and reacted with a protected lysine, a tripeptide and a heptapeptide to confirm the urethane linkage formation with lysine moiety and to optimize reaction conditions. Afterwards, the reactions between BCC and a model protein, elastin-like protein (ELP), and β-Lactoglobulin (BLG) obtained from whey protein, respectively, were performed. The synthesized protein materials were structural, thermally and morphologically characterized to confirm the urethane linkage formation. The results demonstrate that using both simple and more complex source of amines (lysine), urethane linkages were effectively achieved. This pioneering approach opens the possibility of using proteins to develop non-isocyanate polyurethanes (NIPUs) with tailored properties.

Keywords

l-Lysine Peptides Proteins ELP β-Lactoglobulin Cyclic carbonate 

Notes

Acknowledgements

TSSIPRO—Technologies For Sustainable And Smart Innovative Products, NORTE-01-0145-FEDER-000015 and COMPETE 2020 Programme and National Funds through FCT—Portuguese Foundation for Science and Technology under the project UID/CTM/50025/2013. The authors would like to thank Professor Sílvia Lima and Professor Susana Costa from the Chemistry Department at the University of Minho for kindly allow the use of Microwave CEM Discover SPS equipment and for all knowledge shared during this work.

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

Research involving human participants and/or animals

This research did not involve human participants or animals.

Informed consent

None.

Supplementary material

726_2019_2770_MOESM1_ESM.docx (160 kb)
Supplementary material 1 (DOCX 159 kb)

References

  1. Bähr M, Mülhaupt R (2012) Linseed and soybean oil-based polyurethanes prepared via the non-isocyanate route and catalytic carbon dioxide conversion. Green Chem 14:483–489CrossRefGoogle Scholar
  2. Bernardim B, Cal PMSD, Matos MJ, Oliveira BL, Martínez-Sáez N, Albuquerque IS, Perkins E, Corzana F, Burtoloso ACB, Jiménez-Osés G (2016) Stoichiometric and irreversible cysteine-selective protein modification using carbonylacrylic reagents. Nat Commun 7:13128CrossRefGoogle Scholar
  3. Booysen J, Marx S, Muller LC. Vermeulen U, Grobler A (2015) Synthesis of novel non-isocyanate polyhydroxyurethane from l-lysine and its application. In: 7th International Conference on Latest Trends in Engineering & Technology, pp 184–190Google Scholar
  4. Brown J, Davidowski S, Xu D, Cebe P, Onofrei D, Holland G, Kaplan D (2016) Thermal and structural properties of silk biomaterials plasticized by glycerol. Biomacromol 17:3911–3921CrossRefGoogle Scholar
  5. Burke A, Hasirci N (2004) Polyurethanes in biomedical applications. Adv Exp Med Biol 553:83–101CrossRefGoogle Scholar
  6. Butnaru M, Bredetean O, Macocinschi D, Dimitriu CD, Knieling L, Harabagiu V (2012) Biocompatibility and biological performance of the improved polyurethane membranes for medical applications. Polyurethane 10:201–228Google Scholar
  7. Carré C, Bonnet L, Avérous L (2015) Solvent- and catalyst-free synthesis of fully biobased nonisocyanate polyurethanes with different macromolecular architectures. RSC Adv 5:100390–100400CrossRefGoogle Scholar
  8. Carré C, Zoccheddu H, Delalande S, Pichon P, Avérous L (2016) Synthesis and characterization of advanced biobased thermoplastic nonisocyanate polyurethanes, with controlled aromatic-aliphatic architectures. Eur Polym J 84:759–769CrossRefGoogle Scholar
  9. Chan WY, Bochenski T, Schmidt JE, Olsen BD (2017) Peptide domains as reinforcement in protein-based elastomers. ACS Sustain Chem Eng 5:8568–8578CrossRefGoogle Scholar
  10. Cobo I, Li M, Sumerlin BS, Perrier S (2014) Smart hybrid materials by conjugation of responsive polymers to biomacromolecules. Nat Mater 14:143CrossRefGoogle Scholar
  11. Cornille A, Dworakowska S, Bogdal D, Boutevin B, Caillol S (2015) A new way of creating cellular polyurethane materials: NIPU foams. Eur Polym J 66:129–138CrossRefGoogle Scholar
  12. Cornille A, Guillet C, Benyahya S, Negrell C, Boutevin B, Caillol S (2016) Room temperature flexible isocyanate-free polyurethane foams. Eur Polym J 84:873–888CrossRefGoogle Scholar
  13. Cornille A, Auvergne R, Figovsky O, Boutevin B, Caillol S (2017) A perspective approach to sustainable routes for non-isocyanate polyurethanes. Eur Polym J 87:535–552CrossRefGoogle Scholar
  14. Elena D, Vincent F, Guillaume M, Frédéric S, Rémi A, Stéphane F, Sylvain C (2016) Thermoresponsive crosslinked isocyanate-free polyurethanes by Diels-Alder polymerization. J Appl Polym Sci 134:44408–44419Google Scholar
  15. Fabian H, Mäntele W (2006) Infrared spectroscopy of proteins. Handbook of Vibrational Spectroscopy. Biochem Appl 2006:3399–3425Google Scholar
  16. Gerard L (2014) Renewable polyols for polyurethane synthesis via thiol-ene/yne couplings of plant oils. Macromol Chem Phys 214:415–422Google Scholar
  17. Gonzales M, Simon J, Ghoorchian A, Scholl Z, Lin S, Rubinstein M, Marszalek P, Chilkoti A, López G, Zhao X (2017) Strong, tough, stretchable, and self-adhesive hydrogels from intrinsically unstructured proteins. Adv Mater 29:1604743CrossRefGoogle Scholar
  18. Hannes B, Maria F, Moritz B, Rolf M (2014) Isocyanate- and phosgene-free routes to polyfunctional cyclic carbonates and green polyurethanes by fixation of carbon dioxide. Macromol Rapid Commun 35:1238–1254CrossRefGoogle Scholar
  19. Hu X, Cebe P, Weiss AS, Omenetto F, Kaplan DL (2012) Protein-based composite materials. Mater Today 15:208–215Google Scholar
  20. Istanbullu H, Ahmed S, Sheraz MA, Rehman I (2013) Development and characterization of novel polyurethane films impregnated with tolfenamic acid for therapeutic applications. Biomed Res Int 2013:1–8CrossRefGoogle Scholar
  21. Kihara N, Kushida Y, Endo T (1996) Cyclic carbonate and l-lysine derivatives. J Polym Sci 34:2173–2179CrossRefGoogle Scholar
  22. Kreye O, Mutlu H, Meier MAR (2013) Sustainable routes to polyurethane precursors. Green Chem 15:1431–1455CrossRefGoogle Scholar
  23. Lligadas G, Ronda JC, Galià M, Cadiz V (2010) Oleic and undecylenic acids as renewable feedstocks in the synthesis of polyols and polyurethanes. Polymers 2(4):440–453CrossRefGoogle Scholar
  24. Machado R, Da Costa A, Sencadas V, Pereira AM, Collins T, Rodríguez-Cabello JC, Lanceros-Méndez S, Casal M (2015) Exploring the properties of genetically engineered silk-elastin-like protein films. Macromol Biosci 15:1698–1709CrossRefGoogle Scholar
  25. Macocinschi D, Filip D, Vlad S, Tuchilus CG, Cristian AF, Barboiu M (2014) Polyurethane/β-cyclodextrin/ciprofloxacin composite films for possible medical coatings with antibacterial properties. J. Mater. Chem. B 2(6):681–690CrossRefGoogle Scholar
  26. Maisonneuve L, Lamarzelle O, Rix E, Grau E, Cramail H (2015) Isocyanate-free routes to polyurethanes and poly (hydroxy urethane). S Chem Rev 115:12407–12439CrossRefGoogle Scholar
  27. Mallakpour S, Rafiee Z (2008) Use of ionic liquid and microwave irradiation as a convenient, rapid and eco-friendly method for synthesis of novel optically active and thermally stable aromatic polyamides containing N-phthaloyl-l-alanine pendent group. Polym Degrad Stab 93:753–759CrossRefGoogle Scholar
  28. Mallakpour S, Tirgir F, Sabzalian MR (2010) Novel biobased polyurethanes synthesized from nontoxic phenolic diol containing l-tyrosine moiety under green media. J Polym Environ 18:685–695CrossRefGoogle Scholar
  29. Namazi H (2017) Polymers in our daily life. Bioimpacts 7:7374CrossRefGoogle Scholar
  30. Olsen B (2013) Engineering materials from proteins. AIChE J 59:3558–3568CrossRefGoogle Scholar
  31. Poussard L, Mariage J, Grignard B, Detrembleur C, Jéroîme C, Calberg C, Heinrichs B, De Winter J, Gerbaux P, Raquez JM (2016) Non-isocyanate polyurethanes from carbonated soybean oil using monomeric or oligomeric diamines to achieve thermosets or thermoplastics. Macromolecules 49:2162–2171CrossRefGoogle Scholar
  32. Ramos Ó, Reinas I, Silva S, Fernandes J, Cerqueira M, Pereira R, Vicente A, Poças F, Pintado M, Malcata X (2013) Effect of whey protein purity and glycerol content upon physical properties of edible films manufactured therefrom. Food Hydrocoll 30:110–122CrossRefGoogle Scholar
  33. Rokickia G, Parzuchowskia PG, Magdalena M (2015) Non-isocyanate polyurethanes: synthesis, properties and applications. Polym Adv Technol 26:707–761CrossRefGoogle Scholar
  34. Silva NHCS, Vilela C, Marrucho IM, Freire CSR, Pascoal Neto C, Silvestre AJD (2014) Protein-based materials: from sources to innovative sustainable materials for biomedical applications. J Mater Chem B 2:3715–3740CrossRefGoogle Scholar
  35. Spicer CD, Davis BG (2014) Selective chemical protein modification. Nat Commun 5:4740Google Scholar
  36. Thomas S, Datta J, Haponiuk J, Reghunadhan A (2017) Polyurethane polymers: composites and nanocomposites, 1st edn. Elsevier, AmsterdamGoogle Scholar
  37. van Velthoven J, Gootjes L, van Es D, Noordover B, Meuldijk J (2015) Poly(hydroxyurethane)s based on renewable diglycerol dicarbonate. Eur Polym J 70:125–135CrossRefGoogle Scholar
  38. Wang F, Yang C, Hu X (2014) Advanced protein composite materials. In lightweight materials from biopolymers and biofibers. ACS Symposium Series 1175:177–208CrossRefGoogle Scholar
  39. Wang C, Zheng Y, Sun Y, Fan J, Qin Q, Zhao Z (2016) A novel biodegradable Polyurethane based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(ethylene glycol) as promising biomaterials with the improvement of mechanical properties and hemocompatibility. Polym Chem 7:6120–6132CrossRefGoogle Scholar
  40. Worm B, Lotze HK, Jubinville I, Wilcox C, Jambeck J (2017) Plastic as a persistent marine pollutant. Annu Rev Environ Resour 42:1–26CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Institute of Polymers and Composites/I3NUniversity of MinhoGuimarãesPortugal
  2. 2.Department of Chemical EngineeringMassachusetts Institute of TechnologyCambridgeUSA

Personalised recommendations