Advertisement

Applied Magnetic Resonance

, Volume 50, Issue 1–3, pp 441–453 | Cite as

Investigation on Unsaturated Hydraulic Conductivity with Nuclear Magnetic Resonance Technology and Instantaneous Profile Method

  • Bao Chen
  • Yiyi HuangEmail author
  • Kang Zhang
  • Fei Wu
Original Paper
  • 40 Downloads

Abstract

Determination of the transient water content distribution in porous materials with both swiftness and accuracy during the unsaturated permeability tests seems somewhat difficult. The traditional water content measurement methods using relatively large probes generally, which exhibit inconvenience and inefficiency to some extent, do unavoidably some destructive exercises on the specimens. In this paper, the saturation (water content) distribution in a white Portland cement specimen that had a dry density of 1.35 g/cm3 was measured swiftly and non-destructively by employing the nuclear magnetic resonance (NMR) technology. Unsaturated hydraulic conductivities of the white Portland cement specimen corresponding to different suctions were obtained using the instantaneous profile (IP) method. It appears from the obtained results that under a dry density of 1.35 g/cm3, the unsaturated hydraulic conductivity of the white Portland cement varies between 10−11 and 10−7 m/s; with the decreasing suction, the hydraulic conductivity increases mildly and sharply, respectively, in the high and modest suction ranges, and stalls in the low suction range; and it enjoys both efficiency and preciousness to measure the water content distribution in the specimen with the NMR technology.

Notes

Acknowledgements

This study was financially supported by the National Natural Science Foundation of China (41372270).

References

  1. 1.
    D.G. Fredlund, A.Q. Xing, S.Y. Huang, Can. Geotech. J. 31, 533–546 (1994)CrossRefGoogle Scholar
  2. 2.
    X. Li, L.M. Zhang, D.G. Fredlund, Can. Geotech. J. 46, 1431–1445 (2009)CrossRefGoogle Scholar
  3. 3.
    S.J. Richards, L.V. Weeks, Soil Sci. Soc. Am. J. 17, 206–209 (1953)ADSCrossRefGoogle Scholar
  4. 4.
    D.G. Toll, S.D.N. Lourenço, J. Mendes, Eng. Geol. 165, 29–37 (2013)CrossRefGoogle Scholar
  5. 5.
    Y.J. Cui, A.M. Tang, C. Loiseau, P. Delage, Phys. Chem. Earth Parts A/b/c 33, S462–S471 (2008)ADSCrossRefGoogle Scholar
  6. 6.
    C. Sławiński, J. Cymerman, B. Witkowskawalczak, K. Lamorski, Int. Agrophys. 26, 301–309 (2012)CrossRefGoogle Scholar
  7. 7.
    S. Subedi, K. Kawamoto, A.K. Karunarathna, P. Moldrup, L. Wollesen de Jonge, T. Komatsu, Soil Sci. Soc. Am. J. 77, 1517–1528 (2013)ADSCrossRefGoogle Scholar
  8. 8.
    W.Y. Wang, J.F. Zhang, Z.R. Wang, Trans. Chin. Soc. Agric. Eng. 20, 95–98 (2004) (in Chinese) CrossRefGoogle Scholar
  9. 9.
    L.P. Chen, Y.W. Gao, P.Q. Yang, Modem Sci. Instrum. 6, 39–43 (2014) (in Chinese) Google Scholar
  10. 10.
    A.R. Tice, C.M. Burrous, D.M. Anderson, Transp. Res. Rec. 1978, 11–14 (1978)Google Scholar
  11. 11.
    K.P. Zhou, J.L. Li, Y.J. Xu, Y.M. Zhang, J. Central South Univ. (Sci. Technol.) 12, 4796–4800 (2012) (in Chinese) Google Scholar
  12. 12.
    H.H. Tian, C.F. Wei, H.Z. Wei, R.T. Yan, P. Chen, Appl. Magn. Reson. 45, 49–61 (2014)CrossRefGoogle Scholar
  13. 13.
    H.N. Atahan, O.N. Oktar, M.A. Taşdemir, Constr. Build. Mater. 23, 1196–1200 (2004)CrossRefGoogle Scholar
  14. 14.
    B. Chen, L.X. Qian, W.M. Ye, J. Wang, Chin. J. Rock Mechan. Eng. 25, 788–793 (2006)Google Scholar
  15. 15.
    X. Li, L.M. Zhang, Exp. Unsat. Soil Mech. 112, 401–412 (2007)CrossRefGoogle Scholar
  16. 16.
    D. Li, G. Gao, M. Shao, B. Fu, J. Hydrol. 538, 539–550 (2016)ADSCrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2018

Authors and Affiliations

  1. 1.College of Civil EngineeringTongji UniversityShanghaiChina
  2. 2.Key Laboratory of Geotechnical and Underground Engineering of Ministry of EducationTongji UniversityShanghaiChina
  3. 3.Suzhou Niumag Analytical Instrument CorporationSuzhouChina

Personalised recommendations