Advertisement

Acta Mechanica

, Volume 229, Issue 10, pp 4071–4089 | Cite as

Influence of the homogenization scheme on the bending response of functionally graded plates

  • S. Srividhya
  • K. Basant
  • R. K. Gupta
  • A. Rajagopal
  • J. N. Reddy
Original Paper
  • 34 Downloads

Abstract

Functionally graded materials (FGM) are an advanced class of engineering composites constituting of two or more distinct phase materials described by continuous and smooth varying composition of material properties in the required direction. In this work, the effect of the material homogenization scheme on the flexural response of a thin to moderately thick FGM plate is studied. The plate is subjected to different loading and boundary conditions. The formulation is developed based on the first-order shear deformation theory. The mechanical properties are assumed to vary continuously through the thickness of the plate and obey a power-law distribution of the volume fraction of the constituents. The variation of volume fraction through the thickness is computed using two different homogenization techniques, namely rule of mixtures and Mori–Tanaka scheme. Comparative studies have been carried out to demonstrate the efficiency of the present formulation. The results obtained from the two techniques have been compared with the analytical solutions available in the literature. In addition to the above a parametric study bringing out the effect of boundary conditions, loads, and power-law index has also been presented.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Notes

References

  1. 1.
    Shen, H.-S.: Functionally Graded Materials: Nonlinear Analysis of Plates and Shells. CRC Press, Boca Raton (2009)CrossRefGoogle Scholar
  2. 2.
    Jha, D.K., Kant, T., Singh, R.K.: A critical review of recent research on functionally graded plates. Compos. Struct. 96, 833–849 (2013)CrossRefGoogle Scholar
  3. 3.
    Birman, V., Byrd, L.W.: Modeling and analysis of functionally graded materials and structures. Appl. Mech. Rev. 60(5), 195–216 (2007)CrossRefGoogle Scholar
  4. 4.
    Gupta, A., Talha, M.: Recent developments in modeling and analysis of functionally graded materials and structures. Prog. Aerosp. Sci. 79, 1–14 (2015)CrossRefGoogle Scholar
  5. 5.
    Zuiker, J.R.: Functionally graded materials: choice of micromechanics model and limitations in property variation. Compos. Eng. 5(7), 807–819 (1995)CrossRefGoogle Scholar
  6. 6.
    Klusemann, B., Svendsen, B.: Homogenization methods for multi-phase elastic composites: comparison and benchmarks. Tech. Mech. 30(4), 374–386 (2010)Google Scholar
  7. 7.
    Reiter, T., Dvorak, G.J.: Micro mechanical modeling of functionally graded materials. In: IUTAM Symposium on Transformation Problems in Composite and Active Materials. Solid Mechanics and Its Applications, vol. 60, pp. 173–184 (1998)Google Scholar
  8. 8.
    Gasik, M.M.: Micromechanical modelling of functionally graded materials. Comput. Mater. Sci. 13(1–3), 42–55 (1998)CrossRefGoogle Scholar
  9. 9.
    Reddy, J.N.: Analysis of functionally graded plates. Int. J. Numer. Meth. Eng. 47(1–3), 663–684 (2000)CrossRefGoogle Scholar
  10. 10.
    Praveen, G.N., Reddy, J.N.: Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. Int. J. Solids Struct. 35(33), 4457–4476 (1998)CrossRefGoogle Scholar
  11. 11.
    Hasin, Z.: Assessment of the self consistent scheme approximation: conductivity of particulate composites. J. Compos. Mater. 2(3), 284–300 (1968)CrossRefGoogle Scholar
  12. 12.
    Hasin, Z., Shtrikman, S.: A variational approach to the theory of elastic behavior of multiphase materials. J. Mech. Phys. Solids 11(2), 127–140 (1963)MathSciNetCrossRefGoogle Scholar
  13. 13.
    Vel, S.S., Batra, R.C.: Exact solution for thermoelastic deformations of functionally graded thick rectangular plates. AIAA J. 40(7), 1421–1433 (2002)CrossRefGoogle Scholar
  14. 14.
    Mori, T., Tanaka, K.: Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. 21(5), 571–574 (1973)CrossRefGoogle Scholar
  15. 15.
    Benveniste, Y.: A new approach to the application of Mori–Tanaka’s theory in composite materials. Mech. Mater. 6(2), 147–157 (1987)MathSciNetCrossRefGoogle Scholar
  16. 16.
    Willis, J.R.: Bounds and self-consistent estimates for the overall properties of anisotropic composites. J. Mech. Phys. Solids 25(3), 185–202 (1977)CrossRefGoogle Scholar
  17. 17.
    Hill, R.: A self consistent mechanics of composite materials. J. Mech. Phys. Solids 13(4), 213–222 (1965)MathSciNetCrossRefGoogle Scholar
  18. 18.
    Bhaskar, K., Vardan, T.K.: The contradicting assumptions of zero transverse normal stress and strain in thin plate theory—a justification. J. Appl. Mech. 68(4), 660–662 (2001)CrossRefGoogle Scholar
  19. 19.
    Ferreira, A.J.M., Batra, R.C., Rouque, C.M.C., Qian, L.F., Martins, P.A.L.S.: Static analysis of functionally graded plates using third-order shear deformation theory and a meshless method. Compos. Struct. 69(4), 449–457 (2005)CrossRefGoogle Scholar
  20. 20.
    Shen, H.-S., Wang, Z.-X.: Assessment of Voigt and Mori–Tanaka models for vibration analysis of functionally graded plates. Compos. Struct. 94(7), 2197–2208 (2012)CrossRefGoogle Scholar
  21. 21.
    Ardestani, M.M., Soltani, B., Shams, Sh.: Analysis of functionally graded stiffened plates based on FSDT utilizing reproducing kernel particle method. Compos. Struct. 112, 231–240 (2014)Google Scholar
  22. 22.
    Taj, G., Chakrabarti, A.: Static and dynamic analysis of functionally graded skew plates. J. Eng. Mech. 139(7), 848–857 (2013)CrossRefGoogle Scholar
  23. 23.
    Reddy, J.N., Chin, C.D.: Thermo mechanical analysis of functionally graded cylinders and plates. J. Therm. Stress. 21(6), 593–626 (1998)CrossRefGoogle Scholar
  24. 24.
    Reddy, J.N., Cheng, Z.-Q.: Three-dimensional thermomechanical deformations of functionally graded rectangular plates. Eur. J. Mech. A. Solids 20(5), 841–855 (2001)CrossRefGoogle Scholar
  25. 25.
    Kashtalyan, M.: Three-dimensional elasticity solution for bending of functionally graded rectangular plates. Eur. J. Mech. A. Solids 23(5), 853–864 (2004)MathSciNetCrossRefGoogle Scholar
  26. 26.
    Elishakoff, I., Gentilini, C.: Three-dimensional flexure of rectangular plates made of functionally graded materials. J. Appl. Mech. 72(5), 788–791 (2005)CrossRefGoogle Scholar
  27. 27.
    Reddy, J.N.: Energy Principles and Variational Methods in Applied Mechanics, 3rd edn. Wiley, New York (2017)Google Scholar
  28. 28.
    Zenkour, A.M.: Generalized shear deformation theory for bending analysis of functionally graded plates. Appl. Math. Model. 30(1), 67–84 (2006)CrossRefGoogle Scholar
  29. 29.
    Matsunaga, H.: Stress analysis of functionally graded plates subjected to thermal and mechanical loadings. Compos. Struct. 87(4), 344–357 (2009)CrossRefGoogle Scholar
  30. 30.
    Hosseini-Hashemi, S., Taher, H.R.D., Akhavan, H., Omidi, M.: Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory. Appl. Math. Model. 34(5), 1276–1291 (2010)MathSciNetCrossRefGoogle Scholar
  31. 31.
    Talha, M., Singh, B.N.: Static response and free vibration analysis of FGM plates using higher order shear deformation theory. Appl. Math. Model. 34(12), 3991–4011 (2010)MathSciNetCrossRefGoogle Scholar
  32. 32.
    Singha, M.K., Prakash, T., Ganapathi, M.: Finite Element analysis of functionally graded plates under transverse load. Finite Elem. Anal. Des. 47(4), 453–460 (2011)CrossRefGoogle Scholar
  33. 33.
    Reddy, J.N.: Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, 2nd edn. CRC Press, Boca Raton (2004)CrossRefGoogle Scholar
  34. 34.
    Reddy, J.N.: Theory and Analysis of Elastic Plates and Shells, 2nd edn. CRC Press, Boca Raton (2007)Google Scholar
  35. 35.
    Cowper, G.R.: The shear coefficient in Timoshenko’s beam theory. J. Appl. Mech. 33(2), 335–340 (1966)CrossRefGoogle Scholar
  36. 36.
    Neves, A.M.A., Ferreira, A.J.M., Carrera, E., Cinefra, M., Roque, C.M.C., Jorge, R.M.N., Soares, C.M.M.: Static, free vibration and buckling analysis of functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique. Compos. B Eng. 44(1), 657–674 (2013)CrossRefGoogle Scholar
  37. 37.
    Carrera, E., Brischetto, S., Cinefra, M., Soave, M.: Effects of thickness stretching in functionally graded plates and shells. Compos. B Eng. 42(2), 123–133 (2011)CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Austria, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Advanced Systems LaboratoryDRDOHyderabadIndia
  2. 2.Department of Civil EngineeringIndian Institute of Technology HyderabadKandi, SangareddyIndia
  3. 3.Department of Mechanical EngineeringTexas A & M UniversityCollege StationUSA

Personalised recommendations