Springer Nature is making SARS-CoV-2 and COVID-19 research free. View research | View latest news | Sign up for updates

Colorimetric determination of tetrabromobisphenol A based on enzyme-mimicking activity and molecular recognition of metal-organic framework-based molecularly imprinted polymers


A sol-gel method is presented to synthesize molecularly imprinted polymers (MIPs) composed with a copper-based metal-organic framework (referred to as MIP/HKUST-1) on a paper support to selectively recognize tetrabromobisphenol A (TBBPA). The imprinting factor is 7.6 and the maximum adsorption capacity is 187.3 mg g−1. This is much better than data for other MIPs. The degradation of TBBPA is introduced in the procedure. Due to the selective recognition by the MIP, the enzyme-mimicking properties of HKUST-1 under the MIP layer became weak due to the decrease of residue imprinted cavities. And adsorbed TBBPA can be degraded under consumption of hydrogen peroxide (H2O2). The combined effect of H2O2 and HKUST-1 cause the coloration caused by catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine to become less distinct. This amplification strategy is used for the ultrasensitive and highly selective colorimetric determination of TBBPA. The gray intensity is proportional to the logarithm concentration of TBBPA in the range of 0.01–10 ng g−1. The limit of detection is as low as 3 pg g−1, and the blank intensities caused by TBBPA analogues are <1% of that caused by TBBPA at the same concentration, this implying excellent selectivity. The spiked recoveries ranged from 94.4 to 106.6% with relative standard deviation values that were no more than 8.6%. Other features include low costs, rapid response, easy operation and on-site testing.

Schematic representation of colorimetric determination of tetrabromobisphenol A (TBBPA) by paper-based metal-organic framework-based molecularly imprinted polymers (MIP/HKUST-1 composites) using 3,3′,5,5′-tetramethylbenzidine (TMB) as a substrate.

This is a preview of subscription content, log in to check access.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5


  1. 1.

    Law RJ, Allchin CR, de Boer J, Covaci A, Herzke D, Lepom P, Morris S, Tronczynski J, de Wit CA (2006) Levels and trends of brominated flame retardants in the European environment. Chemosphere 64(2):187–208.

  2. 2.

    Wang Y, Liu G, Hou X, Huang Y, Li C, Wu K (2016) Assembling gold nanorods on a poly-cysteine modified glassy carbon electrode strongly enhance the electrochemical reponse to tetrabromobisphenol a. Microchim Acta 183(2):689–696.

  3. 3.

    Abou-Elwafa Abdallah M (2016) Environmental occurrence, analysis and human exposure to the flame retardant tetrabromobisphenol-a (TBBP-A)-a review. Environ Int 94:235–250.

  4. 4.

    Liu K, Li J, Yan S, Zhang W, Li Y, Han D (2016) A review of status of tetrabromobisphenol a (TBBPA) in China. Chemosphere 148:8–20.

  5. 5.

    Colnot T, Kacew S, Dekant W (2014) Mammalian toxicology and human exposures to the flame retardant 2,2′,6,6′-tetrabromo-4,4′-isopropylidenediphenol (TBBPA): implications for risk assessment. Arch Toxicol 88(3):553–573.

  6. 6.

    Wang J, Bever CR, Majkova Z, Dechant JE, Yang J, Gee SJ, Xu T, Hammock BD (2014) Heterologous antigen selection of camelid heavy chain single domain antibodies against tetrabromobisphenol a. Anal Chem 86(16):8296–8302.

  7. 7.

    Qu G, Liu A, Hu L, Liu S, Shi J, Jiang G (2016) Recent advances in the analysis of TBBPA/TBBPS, TBBPA/TBBPS derivatives and their transformation products. TrAC Trends Anal Chem 83:14–24.

  8. 8.

    Zhao Q, Zhang K, Yu G, Wu W, Wei X, Lu Q (2016) Facile electrochemical determination of tetrabromobisphenol a based on modified glassy carbon electrode. Talanta 151:209–216.

  9. 9.

    Li C, Chen X, Wu K, Yu S (2016) Signal enhancement of cetyltrimethylammonium bromide as a highly-sensitive sensing strategy for tetrabromobisphenol a. J Electroanal Chem 770:39–43.

  10. 10.

    Wang Y, Chen F, Ye X, Wu T, Wu K, Li C (2017) Photoelectrochemical immunosensing of tetrabromobisphenol a based on the enhanced effect of dodecahedral gold nanocrystals/MoS2 nanosheets. Sensors Actuators B Chem 245:205–212.

  11. 11.

    Shi H, Zhang L, Yu G, Liu Y, Chen L (2019) Molecularly imprinted mesoporous silica incorporating C3N4 dots and CdTe quantum dots as ratiometric fluorescent probe for determination of malachite green. Microchim Acta 186(8):556–510.

  12. 12.

    Raksawong P, Nurerk P, Chullasat K, Kanatharana P, Bunkoed O (2019) A polypyrrole doped with fluorescent CdTe quantum dots and incorporated into molecularly imprinted silica for fluorometric determination of ampicillin. Microchim Acta 186(6):338.

  13. 13.

    Sun X, Tao Y, Du Y, Ding W, Chen C, Ma X (2019) Metal organic framework HKUST-1 modified with carboxymethyl-β-cyclodextrin for use in improved open tubular capillary electrochromatographic enantioseparation of five basic drugs. Microchim Acta 186(7):462.

  14. 14.

    Guan H-Y, LeBlanc RJ, Xie S-Y, Yue Y (2018) Recent progress in the syntheses of mesoporous metal–organic framework materials. Coord Chem Rev 369:76–90.

  15. 15.

    Li S, Liu X, Chai H, Huang Y (2018) Recent advances in the construction and analytical applications of metal-organic frameworks-based nanozymes. TrAC Trends Anal Chem 105:391–403.

  16. 16.

    Bagheri N, Khataee A, Habibi B, Hassanzadeh J (2018) Mimetic Ag nanoparticle/Zn-based MOF nanocomposite (AgNPs@ZnMOF) capped with molecularly imprinted polymer for the selective detection of patulin. Talanta 179:710–718.

  17. 17.

    Guo T, Deng Q, Fang G, Gu D, Yang Y, Wang S (2016) Upconversion fluorescence metal-organic frameworks thermo-sensitive imprinted polymer for enrichment and sensing protein. Biosens Bioelectron 79:341–346.

  18. 18.

    Feng Y, Lu K, Gao S, Mao L (2017) The fate and transformation of tetrabromobisphenol a in natural waters, mediated by oxidoreductase enzymes. Environ Sci Process Impacts 19(4):596–604.

  19. 19.

    Wang C, Gao J, Gu C (2017) Rapid destruction of Tetrabromobisphenol a by Iron(III)-Tetraamidomacrocyclic ligand/layered double hydroxide composite/H2O2 system. Environ Sci Technol 51(1):488–496.

  20. 20.

    Apilux A, Siangproh W, Praphairaksit N, Chailapakul O (2012) Simple and rapid colorimetric detection of hg(II) by a paper-based device using silver nanoplates. Talanta 97:388–394.

  21. 21.

    Rattanarat P, Dungchai W, Cate D, Volckens J, Chailapakul O, Henry CS (2014) Multilayer paper-based device for colorimetric and electrochemical quantification of metals. Anal Chem 86(7):3555–3562.

  22. 22.

    Petit C, Huang L, Jagiello J, Kenvin J, Gubbins KE, Bandosz TJ (2011) Toward understanding reactive adsorption of ammonia on cu-MOF/graphite oxide nanocomposites. Langmuir 27(21):13043–13051.

  23. 23.

    Zhu Q, Chen Y, Wang W, Zhang H, Ren C, Chen H, Chen X (2015) A sensitive biosensor for dopamine determination based on the unique catalytic chemiluminescence of metal–organic framework HKUST-1. Sensors Actuators B Chem 210:500–507.

  24. 24.

    Ho KL, Yuen KK, Yau MS, Murphy MB, Wan Y, Fong BM, Tam S, Giesy JP, Leung KS, Lam MH (2017) Glucuronide and sulfate conjugates of tetrabromobisphenol a (TBBPA): chemical synthesis and correlation between their urinary levels and plasma TBBPA content in voluntary human donors. Environ Int 98:46–53.

  25. 25.

    Chen Z, Yin J-J, Zhou Y-T, Zhang Y, Song L, Song M, Hu S, Gu N (2012) Dual enzyme-like activities of Iron oxide nanoparticles and their implication for diminishing cytotoxicity. ACS Nano 6(5):4001–4012.

  26. 26.

    Luo F, Lin Y, Zheng L, Lin X, Chi Y (2015) Encapsulation of Hemin in metal–organic frameworks for catalyzing the Chemiluminescence reaction of the H2O2–Luminol system and detecting glucose in the neutral condition. ACS Appl Mater Interfaces 7(21):11322–11329.

  27. 27.

    Irani-nezhad MH, Khataee A, Hassanzadeh J, Orooji Y (2019) A Chemiluminescent method for the detection of H2O2 and glucose based on intrinsic peroxidase-like activity of WS2 quantum dots. Molecules 24(4).

  28. 28.

    Shao Y, Zhou L, Wu Q, Bao C, Liu M (2017) Preparation of novel magnetic molecular imprinted polymers nanospheres via reversible addition - fragmentation chain transfer polymerization for selective and efficient determination of tetrabromobisphenol a. J Hazard Mater 339:418–426.

  29. 29.

    Wu Q, Li M, Huang Z, Shao Y, Bai L, Zhou L (2018) Well-defined nanostructured core–shell magnetic surface imprinted polymers (Fe3O4@SiO2@MIPs) for effective extraction of trace tetrabromobisphenol a from water. J Ind Eng Chem 60:268–278.

  30. 30.

    Yang J, Li Y, Wang J, Sun X, Cao R, Sun H, Huang C, Chen J (2015) Molecularly imprinted polymer microspheres prepared by Pickering emulsion polymerization for selective solid-phase extraction of eight bisphenols from human urine samples. Anal Chim Acta 872:35–45.

  31. 31.

    Zhao W, Sheng N, Zhu R, Wei F, Cai Z, Zhai M, Du S, Hu Q (2010) Preparation of dummy template imprinted polymers at surface of silica microparticles for the selective extraction of trace bisphenol a from water samples. J Hazard Mater 179(1–3):223–229.

  32. 32.

    Li J, Zhang X, Liu Y, Tong H, Xu Y, Liu S (2013) Preparation of a hollow porous molecularly imprinted polymer using tetrabromobisphenol a as a dummy template and its application as SPE sorbent for determination of bisphenol a in tap water. Talanta 117:281–287.

  33. 33.

    Chen Y, Mu X, Lester E, Wu T (2018) High efficiency synthesis of HKUST-1 under mild conditions with high BET surface area and CO2 uptake capacity. Prog Nat Sci Mater 28(5):584–589.

  34. 34.

    Klaysri R, Tubchareon T, Praserthdam P (2017) One-step synthesis of amine-functionalized TiO2 surface for photocatalytic decolorization under visible light irradiation. J Ind Eng Chem 45:229–236.

  35. 35.

    Gong S-X, Wang X-L, Liu W, Wang M-L, Wang X, Wang Z-W, Zhao R-S (2017) Aminosilanized magnetic carbon microspheres for the magnetic solid-phase extraction of bisphenol a, bisphenol AF, and tetrabromobisphenol a from environmental water samples. J Sep Sci 40(8):1755–1764.

  36. 36.

    Yin YM, Chen YP, Wang XF, Liu Y, Liu HL, Xie MX (2012) Dummy molecularly imprinted polymers on silica particles for selective solid-phase extraction of tetrabromobisphenol a from water samples. J Chromatogr A 1220:7–13.

  37. 37.

    Chen YP, Wang DN, Yin YM, Wang LY, Wang XF, Xie MX (2012) Quantum dots capped with dummy molecularly imprinted film as luminescent sensor for the determination of tetrabromobisphenol a in water and soils. J Agric Food Chem 60(42):10472–10479.

  38. 38.

    Zhou T, Feng Y, Zhou L, Tao Y, Luo D, Jing T, Shen X, Zhou Y, Mei S (2016) Selective and sensitive detection of tetrabromobisphenol-a in water samples by molecularly imprinted electrochemical sensor. Sensors Actuators B Chem 236:153–162.

  39. 39.

    Boatright WL (2016) Oxygen dependency of one-electron reactions generating ascorbate radicals and hydrogen peroxide from ascorbic acid. Food Chem 196:1361–1367.

  40. 40.

    Zieminska E, Lenart J, Diamandakis D, Lazarewicz JW (2017) The role of Ca(2+) imbalance in the induction of acute oxidative stress and cytotoxicity in cultured rat cerebellar granule cells challenged with Tetrabromobisphenol a. Neurochem Res 42(3):777–787.

  41. 41.

    Hendriks HS, van Kleef RG, van den Berg M, Westerink RH (2012) Multiple novel modes of action involved in the in vitro neurotoxic effects of tetrabromobisphenol-a. Toxicol Sci 128(1):235–246.

  42. 42.

    Chen HJ, Zhang ZH, Cai R, Kong XQ, Chen X, Liu YN, Yao SZ (2013) Molecularly imprinted electrochemical sensor based on a reduced graphene modified carbon electrode for tetrabromobisphenol a detection. Analyst 138(9):2769–2776.

  43. 43.

    Wang K, Liu Z, Ji P, Liu J, Eremin SA, Li QX, Li J, Xu T (2016) A camelid VHH-based fluorescence polarization immunoassay for the detection of tetrabromobisphenol a in water. Anal Methods 8(39):7265–7271.

  44. 44.

    Bu D, Zhuang H, Zhou X, Yang G (2014) Biotin-streptavidin enzyme-linked immunosorbent assay for detecting Tetrabromobisphenol a in electronic waste. Talanta 120:40–46.

  45. 45.

    Guerra P, Eljarrat E, Barcelo D (2010) Simultaneous determination of hexabromocyclododecane, tetrabromobisphenol a, and related compounds in sewage sludge and sediment samples from Ebro River basin (Spain). Anal Bioanal Chem 397(7):2817–2824.

  46. 46.

    Ni HG, Zeng H (2013) HBCD and TBBPA in particulate phase of indoor air in Shenzhen, China. Sci Total Environ 458-460:15–19.

  47. 47.

    Wang W, Abualnaja KO, Asimakopoulos AG, Covaci A, Gevao B, Johnson-Restrepo B, Kumosani TA, Malarvannan G, Minh TB, Moon HB, Nakata H, Sinha RK, Kannan K (2015) A comparative assessment of human exposure to tetrabromobisphenol a and eight bisphenols including bisphenol a via indoor dust ingestion in twelve countries. Environ Int 83:183–191.

Download references


This work was supported by the National Natural Science Foundation of China (No. 21577042) and the National Basic Research Program of China (973 Program, No. 2015CB352100). We also thank the Analytical and Testing Center of Huazhong University of Science and Technology for TG-DSC, XPS, FT-IR and SEM analysis.

Author information

Correspondence to Tao Jing.

Ethics declarations

Conflict of interest

The authors declare that they have no competing interests.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material


(DOCX 2232 kb)

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Zeng, L., Cui, H., Chao, J. et al. Colorimetric determination of tetrabromobisphenol A based on enzyme-mimicking activity and molecular recognition of metal-organic framework-based molecularly imprinted polymers. Microchim Acta 187, 142 (2020).

Download citation


  • MIP/HKUST-1 composites
  • On-site monitoring
  • Paper-based analytical devices
  • Signal amplification strategy
  • Peroxidase-like activity