Advertisement

Preclinical evaluation of a novel anterior non-fusion fixation device for atlantoaxial instability: an in vivo comparison study in a canine model

  • Xuan Cai
  • Xiaoqing Yi
  • Haopeng Li
  • Xijing HeEmail author
Original Article

Abstract

Purpose

The Anterior Atlantoaxial Non-Fusion Fixation System (AANFS) was a novel motion preservation device for atlantoaxial instability to replace traditional fusion techniques. The purpose of this in vivo study was to evaluate the clinical features and biomechanical properties of this new device in a canine model by comparing it with a conventional method.

Methods

Eighteen adult male canines were randomly divided into group 1, which received the AANFS replacement, group 2 which received the Harms rigid fixation procedures, and group 3, which served as the control group. Routine follow-up evaluations were performed postoperatively. Specimens were harvested 12 weeks after the operation. Biomechanical tests were conducted to obtain the range of motion (ROM) and neutral zone (NZ) at C1–C2 segment in different groups.

Results

The canines successfully tolerated the entire experimental procedure. No significant differences were found in surgery time, blood loss and recovery time between the AANFS group and the Harms rigid fixation group. Radiological examinations revealed that the position of the implant was good. Biomechanical results showed that, compared with the intact group, the mean ROM and NZ in flexion, extension, lateral bending and rotation were significantly reduced after rigid fixation. However, after the AANFS implantation, ROM and NZ in all directions were similar to those of the intact state.

Conclusions

This study for the first time provides an animal model for studying non-fusion strategies of upper cervical spine. The AANFS was able to maintain movement function of the atlantoaxial joint and may be an alternative to traditional fusion techniques.

Graphical abstract

These slides can be retrieved under Electronic Supplementary Material.

Keywords

In vivo Canine model Atlantoaxial instability Non-fusion Biomechanics 

Notes

Acknowledgements

This study was sponsored by National Natural Science Youth Funds of China (Program No.: 81601955) (http://www.nsfc.gov.cn). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

Compliance with ethical standards

Conflict of interest

The authors declare that they have no competing interests.

Ethics statement

This study was carried out in strict accordance with the recommendations in the Guide for the Care and Use of Laboratory Animals of the National Institutes of Health. The protocol was approved by the Committee of the Second Affiliated Hospital of Xi’an Jiaotong University (Permit Number: 2016-20). All surgery was performed under sodium pentobarbital anesthesia, and all efforts were made to minimize suffering.

Data availability

All data generated or analyzed during this study are included in this article.

Supplementary material

586_2019_5916_MOESM1_ESM.pptx (7.3 mb)
Supplementary material 1 (PPTX 7507 kb)

References

  1. 1.
    Nakagawa H, Yagi K (2014) Advancement in atlantoaxial fixation. World Neurosurg 82:e143–e144CrossRefGoogle Scholar
  2. 2.
    Dickman CA, Crawford NR, Brantley AG, Sonntag VK (1995) Biomechanical effects of transoral odontoidectomy. Neurosurgery 36:1146–1152CrossRefGoogle Scholar
  3. 3.
    Elliott RE, Tanweer O, Boah A, Morsi A, Ma T, Frempong-Boadu A et al (2014) Outcome comparison of atlantoaxial fusion with transarticular screws and screw-rod constructs: meta-analysis and review of literature. J Spinal Disord Tech 27:11–28CrossRefGoogle Scholar
  4. 4.
    Du JY, Aichmair A, Kueper J, Wright T, Lebl DR (2015) Biomechanical analysis of screw constructs for atlantoaxial fixation in cadavers: a systematic review and meta-analysis. J Neurosurg Spine 22:151–161CrossRefGoogle Scholar
  5. 5.
    Rajinda P, Towiwat S, Chirappapha P (2017) Comparison of outcomes after atlantoaxial fusion with C1 lateral mass-C2 pedicle screws and C1–C2 transarticular screws. Eur Spine J 26:1064–1072CrossRefGoogle Scholar
  6. 6.
    Elbadrawi AM, Elkhateeb TM (2017) Transoral approach for odontoidectomy efficacy and safety. HSS J 13:276–281CrossRefGoogle Scholar
  7. 7.
    Shriver MF, Kshettry VR, Sindwani R, Woodard T, Benzel EC, Recinos PF (2016) Transoral and transnasal odontoidectomy complications: a systematic review and meta-analysis. Clin Neurol Neurosurg 148:121–129CrossRefGoogle Scholar
  8. 8.
    Derman PB, Lampe LP, Lyman S, Kueper J, Pan TJ, Girardi FP et al (2016) Atlantoaxial fusion: sixteen years of epidemiology, indications, and complications in New York State. Spine (Phila Pa 1976) 41:1586–1592CrossRefGoogle Scholar
  9. 9.
    Cai X, He X, Li H, Wang D (2013) Total atlanto-odontoid joint arthroplasty system: a novel motion preservation device for atlantoaxial instability after odontoidectomy. Spine (Phila Pa 1976) 38:451–457CrossRefGoogle Scholar
  10. 10.
    Lu B, He X, Zhao CG, Li HP, Wang D (2009) Biomechanical study of artificial atlanto-odontoid joint. Spine (Phila Pa 1976) 34:1893–1899CrossRefGoogle Scholar
  11. 11.
    Goel A, Desai KI, Muzumdar DP (2002) Atlantoaxial fixation using plate and screw method: a report of 160 treated patients. Neurosurgery 51:1351–1356CrossRefGoogle Scholar
  12. 12.
    Tanenbaum JE, Lubelski D, Rosenbaum BP, Thompson NR, Benzel EC, Mroz TE (2016) Predictors of outcomes and hospital charges following atlantoaxial fusion. Spine J 16:608–618CrossRefPubMedCentralGoogle Scholar
  13. 13.
    Skeppholm M, Lindgren L, Henriques T, Vavruch L, Löfgren H, Olerud C (2015) The Discover artificial disc replacement versus fusion in cervical radiculopathy—a randomized controlled outcome trial with 2-year follow-up. Spine J 15:1284–1294CrossRefGoogle Scholar
  14. 14.
    Goel A (2015) Artificial atlantoaxial joint: is it a possible option? J Craniovertebr Junction Spine 6:147–148CrossRefPubMedCentralGoogle Scholar
  15. 15.
    Moriguchi Y, Mojica-Santiago J, Grunert P, Pennicooke B, Berlin C, Khair T et al (2017) Total disc replacement using tissue-engineered intervertebral discs in the canine cervical spine. PLoS ONE 12:e0185716CrossRefPubMedCentralGoogle Scholar
  16. 16.
    Grunert P, Moriguchi Y, Grossbard BP, Ricart Arbona RJ, Bonassar LJ, Härtl R (2017) Degenerative changes of the canine cervical spine after discectomy procedures, an in vivo study. BMC Vet Res 13:193CrossRefPubMedCentralGoogle Scholar
  17. 17.
    Farrokhi MR, Torabinezhad S, Ghajar KA (2010) Pilot study of a new acrylic cage in a dog cervical spine fusion model. J Spinal Disord Tech 23:272–277CrossRefGoogle Scholar
  18. 18.
    Johnson JA, da Costa RC, Bhattacharya S, Goel V, Allen MJ (2011) Kinematic motion patterns of the cranial and caudal canine cervical spine. Vet Surg 40:720–727CrossRefGoogle Scholar
  19. 19.
    Shriver MF, Kshettry VR, Sindwani R, Woodard T, Benzel EC, Recinos PF (2016) Transoral and transnasal odontoidectomy complications: a systematic review and meta-analysis. Clin Neurol Neurosurg 148:121–129CrossRefGoogle Scholar
  20. 20.
    Kim SM, Lim TJ, Paterno J, Hwang TJ, Lee KW, Balabhadra RS et al (2004) Biomechanical comparison of anterior and posterior stabilization methods in atlantoaxial instability. J Neurosurg 100(3 Suppl Spine):277–283Google Scholar
  21. 21.
    Ohe M, Moridaira H, Inami S, Takeuchi D, Nohara Y, Taneichi H (2018) Pedicle screws with a thin hydroxyapatite coating for improving fixation at the bone-implant interface in the osteoporotic spine: experimental study in a porcine model. J Neurosurg Spine 28:679–687CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Orthopaedic SurgerySecond Affiliated Hospital of Xi’an Jiaotong UniversityXi’anPeople’s Republic of China
  2. 2.Department of PediatricsSecond Affiliated Hospital of Xi’an Jiaotong UniversityXi’anPeople’s Republic of China

Personalised recommendations