Advertisement

Effect of heat generation on mixed convection in porous cavity with sinusoidal heated moving lid and uniformly heated or cooled bottom walls

  • Adel Alblawi
  • N. Zainuddin
  • R. Roslan
  • Mohammad Rahimi-Gorji
  • N. A. Bakar
  • Hoang-Thinh DoEmail author
Technical Paper

Abstract

Effect of heat generation and absorption on mixed convection flows in a sinusoidal heated lid-driven square cavity filled with a porous medium is investigated numerically. Both the vertical walls of the enclosure are insulated while the bottom wall is uniformly heated or cooled. The top wall is moving at a constant speed and is heated sinusoidally. The governing equations and boundary conditions are non-dimensionalized and solved numerically by using finite volume method approach along with SIMPLE algorithm together with non-uniform grid system. The effect of Darcy and heat generation parameters are investigated in terms of the flow, heat transfer, and Nusselt number. The results for stream function and isotherm are plotted and it is found that there have significant influence with the presence of heat generation and porous medium.

Notes

Acknowledgements

The authors would like to acknowledge the financial support received from the Universiti Tun Hussein Onn Malaysia grant Tier1/H184.

References

  1. Abu-Nada E, Chamkha AJ (2010) Mixed convection flow in a lid-driven inclined square enclosure filled with a nanouid. Eur J Mech B/Fluids 29:472–482CrossRefGoogle Scholar
  2. Adesanya SO, Souayeh B, Rahimi-Gorji M, Khan MN, Adeyemi OG (2019) Heat irreversibiility analysis for a couple stress fluid flow in an inclined channel with isothermal boundaries. J Taiwan Inst Chem Eng 101:251–258CrossRefGoogle Scholar
  3. Akermi M, Jaballah N, Alarifi IM, Rahimi-Gorji M, Chaabane RB, Ouada HB, Majdoub M (2019) Synthesis and characterization of a novel hydride polymer P-DSBT/ZnO nano-composite for optoelectronic applications. J Mol Liquids 287:110963CrossRefGoogle Scholar
  4. Al-Amiri A (2000) Analysis of momentum ad energy transfer in a lid-driven cavity filled with a porous medium. Int J Heat Mass Transf 43(19):3513–3527CrossRefGoogle Scholar
  5. Arani Abbasian, Sebdani SM, Mahmoodi M, Ardeshiri A, Aliakbari A (2012) Numerical study of mixed convection flow in an lid-driven cavity with sinusoidal heating on sidewalls using nanofluid. Superlattices Microstruct 51:893–911CrossRefGoogle Scholar
  6. Basak T, Roy S, Sharma PK, Pop I (2009) Analysis of mixed convection flows within a square cavity with uniform and non-uniform heating of bottom wall. Int J Therm Sci 48:891–912CrossRefGoogle Scholar
  7. Basak T, Roy S, Singh SK, Pop I (2010) Analysis of mixed convection in a lid-driven porous square cavity with linearly heated side wall(s). Int J Heat Mass Transf 53:1819–1840CrossRefGoogle Scholar
  8. Bettaibi S, Kuznik F, Sediki E (2016) Hybrid LBM-MRT model coupled with finite difference method for double-diffusive mixed convection in rectangular enclosure with insulated moving lid. Phys A 444:311–326MathSciNetCrossRefGoogle Scholar
  9. Bhatti MM, Abbas MA (2016) Simultaneous effects of slip and MHD on peristaltic blood flow of Jeffrey fluid model through a porous medium. Alex Eng J 55:1017–1023CrossRefGoogle Scholar
  10. Bhatti MM, Ellahi R, Zeeshan A (2016) Study of variable magnetic field on the peristaltic flow of Jeffrey fluid in a non-uniform rectangular duct having compliant walls. J Mol Liq 222:101–108CrossRefGoogle Scholar
  11. Bhatti MM, Zeeshan A, Ellahi R, Ijaz N (2017) Heat and mass transfer of two-phase flow with electric double layer effects induced due to peristaltic propulsion in the presence of transverse magnetic field. J Mol Liq 230:237–246CrossRefGoogle Scholar
  12. Bhatti MM, Zeeshan A, Ellahi R, Anwar Bég O, Kadir A (2019) Effects of coagulation on the two-phase peristaltic pumping of magnetized prandtl biofluid through an endoscopic annular geometry containing a porous medium. Chin J Phys 58:222–223CrossRefGoogle Scholar
  13. Chamkha AJ (2002) Hydromagnetic combined convection flow in a vertical lid-driven cavity with internal heat generation or absorption. Numerical Heat Transfer 41:529–546CrossRefGoogle Scholar
  14. Das S, Sahoo RK (1999) Effect of Darcy, fluid Rayleigh and heat generation parameters in natural convection in a porous square enclosure: a Brinkman-extended Darcy model. Int Commun Heat Mass Transfer 26(4):569–578CrossRefGoogle Scholar
  15. D’Orazio A, Karimipour A, Nezhad AH, Shirani E (2015) Lattice Boltzmann method with heat flux boundary condition applied to mixed convection in inclined lid driven cavity. Meccanica 50:945–962MathSciNetCrossRefGoogle Scholar
  16. Elsherbiny SM, Ismail OI (2015) Heat transfer in inclined air rectangular cavities with two localized heat sources. Alex Eng J 54:917–927CrossRefGoogle Scholar
  17. Imberger J, Hamblin PF (1982) Dynamics of lakes, reservoirs, and cooling ponds. Rev Fluid Mech 14:153–187CrossRefGoogle Scholar
  18. Iwatsu R, Hyun JM, Kuwahara K (1993) Mixed convection in a driven cavity with a stable vertical temperature gradient. Int J Heat Mass Transf 36(6):1601–1608CrossRefGoogle Scholar
  19. Kahshan M, Dianchen L, Rahimi-Gorji M (2019) Hydrodynamical study of flow in a permeable channel: application to flat plate dialyzer. Int J Hydrogen Energy 44(31):17041–17047CrossRefGoogle Scholar
  20. Kefayati GHR (2014) Mixed convection of non-Newtonian nanofluids ows in a lid-driven enclosure with sinusoidal temperature profile using FDLBM. Powder Technol 266:268–281CrossRefGoogle Scholar
  21. Kefayati GHR (2015) FDLBM simulation of mixed convection in a lid-driven cavity filled with non-Newtonian nanofluid in the presence of magnetic field. Int J Therm Sci 95:29–46CrossRefGoogle Scholar
  22. Khanafer KM, Chamkha AJ (1998) Hydromagnetic natural convection from an inclined porous square enclosure with heat generation. Numer Heat Transf 33(8):891–910CrossRefGoogle Scholar
  23. Khanafer KM, Chamkha AJ (1999) Mixed convection flow in a lid-driven enclosure filled with a fluid-saturated porous medium. Int J Heat Mass Transf 42:2465–2481CrossRefGoogle Scholar
  24. Khanafer K, Vafai K (2002) Double-diffusive mixed convection in a lid-driven enclosure filled with a fluid saturated porous medium. Numer Heat Transf A 42:465–486CrossRefGoogle Scholar
  25. Kumar KG, Rahimi-Gorji M, Reddy MG, Chamkha AJ, Alarifi IM (2019) Enhancement of heat transfer in a convergent/divergent channel by using carbon nanotubes in the presence of a Darcy-Forchheimer medium. Microsyst Technol.  https://doi.org/10.1007/s00542-019-04489-x CrossRefGoogle Scholar
  26. Lage JL (1992) Effect of the convective inertia term on Benard convection in a porous medium. Numer Heat Transf 22:469–485CrossRefGoogle Scholar
  27. Louaraychi A, Lamsaadi M, Naïmi M, El-Harfi H, Kaddiri M, Raji A, Hasnaoui M (2019) Mixed convection heat transfer correlations in shallow rectangular cavities with single and double-lid driven boundaries. Int J Heat Mass Transf 132:394–406CrossRefGoogle Scholar
  28. Mahapatra TR, Pal D, Mondal S (2013) Mixed convection flow in an inclined enclosure under magnetic field with thermal radiation and heat generation. Int Commun Heat Mass Transf 41:47–56CrossRefGoogle Scholar
  29. Moallemi MK, Jang KS (1992) Prandtl number effects on laminar mixed convection heat transfer in a lid-driven cavity. Int J Heat Mass Transf 35(8):1881–1892CrossRefGoogle Scholar
  30. Muthtamilselvan M, Doh DH (2014a) Magnetic field effect on mixed convection in a lid-driven square cavity filled with nanofluids. J Mech Sci Technol 28:137–143CrossRefGoogle Scholar
  31. Muthtamilselvan M, Doh DH (2014b) Mixed convection of heat generating nanouid in a lid-driven cavity with uniform and non-uniform heating of bottom wall. Appl Math Model 38:3164–3174MathSciNetCrossRefGoogle Scholar
  32. Muthtamilselvan M, Das MK, Kandaswamy P (2010a) Convection in a lid-driven heat-generating porous cavity with alternative thermal boundary conditions. Transp Porous Media 82:337–346CrossRefGoogle Scholar
  33. Muthtamilselvan M, Das MK, Kandaswamy P (2010b) Convection in a lid-driven heat-generating porous cavity with alternative thermal boundary conditions. Transp Porous Media 82:337–346CrossRefGoogle Scholar
  34. Nayak K, Jena PK, Lakshmi Narayana PA (2014) Flow simulation and mixed convection in a lid-driven square cavity with saturated porous media. J Porous Media 17(6):537–548CrossRefGoogle Scholar
  35. Nield DA, Bejan A (1998) Convection in porous media. Springer-Verlag, New YorkzbMATHGoogle Scholar
  36. Patankar SV (1980) Numerical heat transfer and fluid flow. Hemisphere, Washington, D CzbMATHGoogle Scholar
  37. Pekmen, Tezer-Sezgin M (2014) MHD flow and heat transfer in a lid-driven porous enclosure. Comput Fluids 89:191–199MathSciNetCrossRefGoogle Scholar
  38. Pilkington LAB (1969) Review Lecture: the float glass process. Proc R Soc Lond IA 314:1–25CrossRefGoogle Scholar
  39. Saha S, Hasan MN, Saha G and Islam MQ (2010) Effect of inclination angle on mixed convection in a lid-driven square enclosure with internal heat generation or absorption. In: International conference on mechanical, industrial and energy engineeringGoogle Scholar
  40. Sivasankaran S, Sivakumar V, Prakash P (2010) Numerical study on mixed convection in a lid-driven cavity with non-uniform heating on both side walls. Int J Heat Mass Transf 53:4304–4315CrossRefGoogle Scholar
  41. Vishnuvardhanarao E, Das MK (2008) Laminar mixed convection in a parallel two-sided lid-driven differentially heated square cavity filled with a fluid-saturated porous medium. Numer Heat Transf A 53:88–110CrossRefGoogle Scholar
  42. Zainuddin N, Sufahani SF, Karimipour A, Ali M, Roslan R (2018) Hydromagnetic mixed convection flow in an inclined cavity. JP J Heat Mass Transf 15(3):543–568CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Adel Alblawi
    • 1
  • N. Zainuddin
    • 2
  • R. Roslan
    • 2
  • Mohammad Rahimi-Gorji
    • 3
  • N. A. Bakar
    • 2
  • Hoang-Thinh Do
    • 4
    • 5
    Email author
  1. 1.Mechanical Engineering Department, College of EngineeringShaqra UniversityRiyadhSaudi Arabia
  2. 2.Faculty of Applied Sciences and TechnologyUniversiti Tun Hussein Onn MalaysiaJohorMalaysia
  3. 3.Faculty of Medicine and Health ScienceGhent UniversityGhentBelgium
  4. 4.Division of Computational Mechatronics, Institute for Computational ScienceTon Duc Thang UniversityHo Chi Minh CityVietnam
  5. 5.Faculty of Electrical and Electronics EngineeringTon Duc Thang UniversityHo Chi Minh CityVietnam

Personalised recommendations