Modeling and physical analysis of an out-of-plane capacitive MEMS transducer with dynamically coupled electrodes

  • Gabriele BosettiEmail author
  • Johannes Manz
  • Alfons Dehé
  • Ulrich Krumbein
  • Gabriele Schrag
Technical Paper


This paper presents a physics-based system-level compact model of a novel out-of-plane capacitive MEMS transducer for detection of mechanical forces, pressure variations or acceleration. This innovative device, which could be used e.g., as a MEMS microphone for consumer electronics applications—the use case addressed in this work—employs a capacitive read-out scheme based on a combination of plate and comb capacitors. In contrast to conventional plate capacitor transducers both electrodes of this novel device are movable. This feature results in device dynamics analogous to a weakly coupled two-degree-of-freedom oscillator system. An analysis of the governing electromechanical and fluidmechanical coupling effects is presented together with the description of the dynamics of the coupled electrodes. The proposed model, which is based on generalized Kirchoffian networks, can be simulated with the help of standard circuit simulation software. Dynamic measurements performed on two different prototype devices in a low-pressure environment are used to calibrate and validate the model. The resonance frequency shift due to electrostatic spring softening is self-consistently included in the model since the interaction among mechanical, electrical, and fluidic domain is implemented on a physical basis. The presented study also contains an analytical derivation of the dynamics of the device for the small-signal working regime. All in all, the presented analysis provides accurate physical understanding of the device, which can be employed to analyze and improve the transducer characteristics. The energy-coupled and modular modeling approach enables the extension of the model to investigate the performance of the device under the impact of the surrounding atmosphere and the effects of device packaging.



This project has received funding from the Electronic Component Systems for European Leadership Joint Undertaking under Grant Agreement No. 692480. This Joint Undertaking receives support from the European Union’s Horizon 2020 research and innovation program and Germany, Netherlands, Spain, Austria, Belgium, Slovakia.


  1. Bao M (2000) Micro mechanical transducers. Electrostatic driving and capacitive sensing, vol 8. Elsevier Science, pp 139–198Google Scholar
  2. Cho YH, Pisano A, Howe R (1994) Viscous damping model for laterally oscillating microstructures. J Microelectromech Syst 3(2):81–87CrossRefGoogle Scholar
  3. Chowdhury S, Ahmadi M, Miller W (2003) Nonlinear effects in MEMS capacitive microphone design. In: Proceedings international conference on MEMS, NANO and Smart Systems, IEEE, pp 297–302.
  4. Dehé A, Wurzer M, Fuldner M, Krumbein U (2013) Design of a poly silicon MEMS microphone for high signal-to-noise ratio. In: 2013 Proceedings of the European solid-state device research conference (ESSDERC), IEEE, pp 292–295Google Scholar
  5. Kuenzig T, Schrag G, Dehé A, Wachutka G (2015) Performance and noise analysis of capacitive silicon microphones using tailored system-level simulation. In: 2015 Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), IEEE, pp 2192–2195.
  6. Lee KB, Lin L, Cho YH (2008) A closed-form approach for frequency tunable comb resonators with curved finger contour. Sens Actuators A Phys 141(2):523–529CrossRefGoogle Scholar
  7. Manz J, Bosetti G, Dehé A, Schrag G (2017) A novel silicon “star-comb” microphone concept for enhanced signal-to-noise-ratio: Modeling, design and first prototype. In: 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), IEEE, pp 67–70Google Scholar
  8. Puers R, Lapadatu D (1996) Electrostatic forces and their effects on capacitive mechanical sensors. Sens Actuators A Phys 56(3):203–210CrossRefGoogle Scholar
  9. Schrag G, Wachutka G (2013) System-level modeling of MEMS using generalized Kirchhoffian networks basic principles. System-level modeling of MEMS. Wiley-VCH, pp 19–51Google Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Institute for Physics of ElectrotechnologyTechnical University of MunichMunichGermany
  2. 2.Hahn-Schickard InstituteVillingen-SchwenningenGermany
  3. 3.Infineon Technologies AGNeubibergGermany

Personalised recommendations