Microsystem Technologies

, Volume 24, Issue 5, pp 2371–2377 | Cite as

Enhancement of 5 GHz on-chip bandpass filter performance by using CMOS-MEMS inductors

Technical Paper
  • 25 Downloads

Abstract

We propose the use of microelectromechanical system (MEMS) inductors to enhance the performance of a 5-GHz on-chip bandpass filter. The proposed filter is implemented using the TSMC 0.18 μm one-poly six-metal (1P6M) CMOS process. For reducing substrate loss to improve filter performance, the silicon substrate underlying the filter’s MEMS inductors is removed using the Chip Implementation Center micromachining postprocess. Compared to conventional on-chip CMOS inductors on-silicon substrate, the simulation results obtained using the CMOS-MEMS inductors showed a quality factor improvement of 264.3% at 5.5 GHz. The measured insertion loss of the proposed filter with the CMOS-MEMS inductors is 3.2 dB at 4.7 GHz, and the ripple is 0.6 dB in the passband. The − 3-dB bandwidth ranges from 4.2 to 5.8 GHz. The attenuation is better than − 22 dB for frequencies ranging from 1 to 3.8 GHz and − 25 dB from 6.9 to 10 GHz in the stopband. The shape factor of the filter is 1.97:1 at an attenuation of 25/3 dB. The chip area is very small, and the optimal chip size is 1.3 × 0.75 mm2. The proposed filter could be integrated directly with the silicon base process, namely, CMOS and BiCMOS, for 5-GHz band wireless front-end applications.

References

  1. Allidina K, Mirabbasi S (2006) A widely tunable active RF filter topology. In: IEEE international symposium on circuits and systems (ISCAS), pp 879–882Google Scholar
  2. Chen J-H (2010) A CMOS-MEMS bandpass filter for 5 GHz application. In: 2010 cross strait four-regional radio science and wireless technology conference, p 109Google Scholar
  3. Cho H, Burk DE (1991) A three-step method for the de-embedding of high-frequency S-parameter measurements. IEEE Trans Electron Devices 38(6):1371–1375CrossRefGoogle Scholar
  4. Fedder GK, Mukherjee T (2008) CMOS-MEMS filters. In: 2008 IEEE topical meeting on silicon monolithic integrated circuits in RF systems, pp 110–113Google Scholar
  5. Gilmore R, Gilmore R (2003) Practical RF circuit design for modern wireless systems, volume I: passive circuits and systems. Artech House Inc, NorwoodGoogle Scholar
  6. Hung Y-J, Tseng S-H (2007) CIC User Handbook-0.18 μm CMOS MEMS Process v.2.0. Chip Implementation Center, Hsinchu, TaiwanGoogle Scholar
  7. Keysight Technologies (2014) Advanced design system (ADS), ver. 2014. http://www.keysight.com
  8. Kuhn WB, Ibrahim NM (2001) Analysis of current crowding effects in multiturn spiral inductors. IEEE Trans Microwave Theory Tech 49(1):31–38CrossRefGoogle Scholar
  9. Kuhn WB, Yanduru NK, Wyszynski AS (1998) A high dynamic range, digitally tuned, Q-enhanced LC bandpass filter for cellular/PCS receivers. In: 1998 IEEE radio frequency integrated circuits (RFIC) symposium, pp 261–264Google Scholar
  10. Makkonena T, Plessky VP, Steichen W, Chamaly S, Poirel C, Solal M (2003) Fundamental mode 5 GHz surface-acoustic-wave filters using optical lithography. Appl Phys Lett 83:3596–3598CrossRefGoogle Scholar
  11. Nakaska JK, Haslett JW (2007) 2 GHz automatically tuned Q-enhanced CMOS bandpass filter. In: 2007 IEEE/MTT-S international microwave symposium, pp 1599–1602Google Scholar
  12. Ridgers TJ, Boucey C, Frambach J-P, du Roscoat LR (2008) Challenges in integrating embedded RF within a SOC. In: 2008 IEEE radio and wireless symposium, pp 547–550Google Scholar
  13. Thede L (2004) Practical analog and digital filter design. Artech House Inc, NorwoodGoogle Scholar
  14. Wang G, Van M, Barlow F, Elshabini A (2005) An interdigital bandpass filter embedded in LTCC for 5-GHz wireless LAN applications. IEEE Microwave Wireless Compon Lett 15(5):357–359CrossRefGoogle Scholar
  15. Williams AB, Taylor FJ (2006) Electronic filter design. McGraw-Hill, New YorkGoogle Scholar
  16. Wu Y, Ding X, Ismail M, Olsson H (2001) Inductorless CMOS RF bandpass filter. Electron Lett 37(16):1027–1029CrossRefGoogle Scholar
  17. Wu Y, Ding X, Ismail M, Olsson H (2003) RF bandpass filter design based on CMOS active inductors. IEEE Trans Circuits Syst II Analog Digit Signal Process 50(12):942–949CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2017

Authors and Affiliations

  1. 1.Department of Communication EngineeringFeng Chia UniversityTaichungTaiwan, ROC

Personalised recommendations