Advertisement

(Self-)adaptiveness for manufacturing systems: challenges and approaches

  • Birte CaesarEmail author
  • Florian Grigoleit
  • Stephan Unverdorben
Special Issue Paper
  • 11 Downloads

Abstract

Shrinking lot sizes and growing product variability demand frequent changes in manufacturing systems. Common manufacturing systems, however, are built for large, invariant lot sizes. (Self-)adaptive manufacturing systems can, on the other hand, react quickly to changes in both function and capabilities. This ability makes them suitable to meet new customer or production requirements. Introducing (self-)adaptiveness in manufacturing requires designing adaptable and flexible systems and anticipating runtime changes at design time. In this article, we describe the engineering of (self-)adaptiveness of manufacturing systems by presenting definitions, significant challenges, and promising solution approaches. We limit the scope of work on designing and realizing such manufacturing systems based on reference architectures, self-organization, and knowledge-based reconfiguration.

Keywords

Self-adaptiveness Reconfiguration Self-organization Model-based systems engineering Cyber-physical systems Collaborative system group Reference architectures 

Notes

Acknowledgements

This work is a result of the project CrESt funded by the German Federal Ministry of Education and Research under the Grant No. 01IS16043U, 01IS16043A and 01IS16043Q. The whole responsibility for the content rests with the authors.

References

  1. 1.
    Wolf M, Kleindienst M, Ramsauer C, Zierler C, Winter E (2018) Current and future industrial challenges: demographic change and measures for elderly workers in industry 4.0. Ann Fac Eng Hunedoara Int J Eng 16(1):67–76Google Scholar
  2. 2.
    Keddis N, Kainz G, Buckl C, Knoll A (2013) Towards adaptable manufacturing systems (25–28 Feb 2013)Google Scholar
  3. 3.
    Frazelle E (1986) Flexibility: a strategic response in changing. Ind Eng 18:16–20 Google Scholar
  4. 4.
    Beach R, Muhlemann AP, Price D, Paterson A, Sharp JA (2000) A review of manufacturing flexibility. Eur J Oper Res 122(1):41–57CrossRefGoogle Scholar
  5. 5.
    Wiendahl HP, ElMaraghy HA, Nyhuis P, Zäh MF, Wiendahl HH, Duffie N, Brieke M (2007) Changeable manufacturing-classification, design and operation. CIRP Ann 56(2):783–809CrossRefGoogle Scholar
  6. 6.
    Spena PR, Holzner P, Rauch E, Vidoni R, Matt DT (2016) Requirements for the design of flexible and changeable manufacturing and assembly systems: a sme-survey. Procedia CIRP 41:207–212CrossRefGoogle Scholar
  7. 7.
    ElMaraghy HA (2005) Flexible and reconfigurable manufacturing systems paradigms. Int J Flex Manuf Syst 17(4):261–276CrossRefGoogle Scholar
  8. 8.
    Renzi C, Leali F, Cavazzuti M, Andrisano AO (2014) A review on artificial intelligence applications to the optimal design of dedicated and reconfigurable manufacturing systems. Int J Adv Manuf Technol 72(1–4):403–418CrossRefGoogle Scholar
  9. 9.
    Koren Y, Heisel U, Jovane F, Moriwaki T, Pritschow G, Ulsoy G, van Brussel H (1999) Reconfigurable manufacturing systems. CIRP Ann 48(2):527–540CrossRefGoogle Scholar
  10. 10.
    Krupitzer C, Roth FM, VanSyckel S, Schiele G, Becker C (2015) A survey on engineering approaches for self-adaptive systems. Pervasive Mob Comput 17:184–206CrossRefGoogle Scholar
  11. 11.
    Hinchey MG, Sterritt R (2006) Self-managing software. Computer 39(2):107–109CrossRefGoogle Scholar
  12. 12.
    Dey AK (2001) Understanding and using context. Pers Ubiquitous Comput 5(1):4–7CrossRefGoogle Scholar
  13. 13.
    Verein Deutscher Ingenieure (2017) Adaptability—description and measurement of the adaptability of manufacturing companies—medical device industryGoogle Scholar
  14. 14.
    Sethi A, Sethi S (1990) Flexibility in manufacturing: a survey. Int J Flex Manuf Syst 2(4):289–328CrossRefGoogle Scholar
  15. 15.
    Matevska J (2010) Rekonfiguration komponentenbasierter Softwaresysteme zur Laufzeit. Vieweg+Teubner, WiesbadenCrossRefGoogle Scholar
  16. 16.
    Hoang XL, Fay A, Marks P, Weyrich M (2016) Systematization approach for the adaptation of manufacturing machines. In: 2016 IEEE 21st international conference on emerging technologies and factory automation (ETFA), pp 1–4Google Scholar
  17. 17.
    Nyhuis P (2008) Wandlungsfähige produktionssysteme: heute die industrie von morgen gestalten. PZH Produktionstechnisches Zentrum, GarbsenGoogle Scholar
  18. 18.
    Marks P, Hoang XL, Weyrich M, Fay A (2018) A systematic approach for supporting the adaptation process of discrete manufacturing machines. Res Eng Des 24(3):219Google Scholar
  19. 19.
    Zhang Y, Qian C, Lv J, Liu Y (2017) Agent and cyber-physical system based self-organizing and self-adaptive intelligent shopfloor. IEEE Trans Ind Inform 13(2):737–747CrossRefGoogle Scholar
  20. 20.
    Heger CL (2007) Bewertung der Wandlungsfähigkeit von Fabrikobjekten: Zugl. Dissertation Hannover, Univ., 2006, Berichte aus dem IFA, vol. 2007,1. PZH Produktionstechnisches Zentrum, GarbsenGoogle Scholar
  21. 21.
    International Organization for Standardization (2005) Iso/iec 15288—systems and software engineering—system life cycle processesGoogle Scholar
  22. 22.
    Tolio T (ed) (2009) Design of flexible production systems: methodologies and tools. Springer, BerlinGoogle Scholar
  23. 23.
    Lin SW, Miller B, Durand J, Bleakley G, Chigani A, Martin R, Murphy B, Crawford M (2017) The industrial internet of things volume g1: reference architecture. http://www.iiconsortium.org/IIC_PUB_G1_V1.80_2017-01-31.pdf
  24. 24.
    International Organization for Standardization, International Electrotechnical Commission, Institute of Electrical and Electronics Engineers (2011) Iso/iec/ieee 42010-2011—systems and software engineering: architecture descriptionGoogle Scholar
  25. 25.
    Dickerson CE, Mavris D (2010) Architecture and principles of systems engineering. CRC Press, Boca RatonGoogle Scholar
  26. 26.
    Institute of Electrical and Electronics Engineers (1990) IEEE standard glossary of software engineering terminology - IEEE std 610.12-1990Google Scholar
  27. 27.
    Pohl K, Broy M, Daembkes H, Hönninger H (eds) (2016) Advanced model-based engineering of embedded systems: extensions of the SPES 2020 methodology: chapter 1, 3, 4. Springer, ChamGoogle Scholar
  28. 28.
    IBM (2005) An architectural blueprint for autonomic computing. IBM Corporation, Hawthorne, NY, USAGoogle Scholar
  29. 29.
    Babiceanu RF, Chen FF (2006) Development and applications of holonic manufacturing systems: a survey. J Intell Manuf 17(1):111–131CrossRefGoogle Scholar
  30. 30.
    Botti V, Giret A (eds) (2008) ANEMONA: a multi-agent methodology for holonic manufacturing systems. Springer series in advanced manufacturing. Springer, LondonGoogle Scholar
  31. 31.
    Schumacher M (2001) Multi-agent systems. In: Schumacher M (ed) Objective coordination in multi-agent system engineering, vol 2039. Lecture notes in computer science Lecture notes in artificial intelligence. Springer, Berlin, pp 9–32CrossRefGoogle Scholar
  32. 32.
    Tharumarajah A, Wells AJ, Nemes L (2003) c1998) Comparison of emerging manufacturing concepts. In: SMC ’98 conference proceedings. IEEE, Piscataway, NJ, pp 325–331Google Scholar
  33. 33.
    Caesar B, Klein W, Hildebrandt C, Törsleff S, Fay A, Wehrstedt JC (2018) New opportunities using variability management in the manufacturing domain during runtime. In: Schaefer I, Cleophas L, et al. (eds) Joint proceedings of the workshops at modellierung 2018 co-located with modellierung 2018, Braunschweig, Germany, February 21, 2018, pp 91–100Google Scholar
  34. 34.
    Sandkuhl K, Smirnov A, Shilov N (2015) Cyber-physical systems in an enterprise context: From enterprise model to system configuration. In: Abramowicz W (ed) Business information systems workshops, vol 228. Lecture notes in business information processing. Springer, Cham, pp 148–159CrossRefGoogle Scholar
  35. 35.
    Barbosa J, Leitão P, Adam E, Trentesaux D (2015) Dynamic self-organization in holonic multi-agent manufacturing systems: the adacor evolution. Comput Ind 66:99–111CrossRefGoogle Scholar
  36. 36.
    Wang S, Wan J, Zhang D, Li D, Zhang C (2016) Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination. Comput Netw 101:158–168CrossRefGoogle Scholar
  37. 37.
    Gómez-Pérez A, Fernández-López M, Corcho O (2004) Ontological engineering: with examples from the areas of knowledge management, e-commerce and the semantic Web, 1st edn. Advanced information and knowledge processing. Springer, HeidelbergGoogle Scholar
  38. 38.
    Hildebrandt C, Törsleff S, Caesar B, Fay A (2018) Ontology building for cyber-physical systems: a domain expert-centric approach. In: 14th IEEE conference on automation science and engineering (CASE 2018)Google Scholar
  39. 39.
    Smirnov A, Sandkuhl K, Shilov N, Telsya N (2015) Context variation for service self-contextualization in cyber-physical systems. In: Abramowicz W (ed) Business information systems, vol 208. Lecture notes in business information processing. Springer, Cham, pp 309–320CrossRefGoogle Scholar
  40. 40.
    ISO10303-44 (2014) Industrial automation systems and integration—product data representation and exchange: Part 44: integrated generic resource: product structure configurationGoogle Scholar
  41. 41.
    Grigoleit F, Struss P (2015) Configuration as diagnosis: generating configurations with conflict-directed a*: an application to training plan generation. In: 26th international workshop on principles of diagnosis, vol. 1507, pp 91–98Google Scholar
  42. 42.
    Williams BC, Nayak PP (1996) A model-based approach to reactive self-configuring systems. In: Proceedings of the national conference on artificial intelligence. Association for the advancement of artificial intellienceGoogle Scholar
  43. 43.
    Petrovska A, Grigoleit F (2019) Towards context modeling for dynamic collaborative embedded systems in open context. Tenth international workshop on modelling and reasoning in contextGoogle Scholar
  44. 44.
    Crawford LS, Do MB, Ruml WS, Hindi H, Eldershaw C, Zhou R, Kuhn L, Fromherz MP, Biegelsen D, de Kleer J, Larner D (2013) On-line reconfigurable machines. Artif Intell 34:73–88Google Scholar
  45. 45.
    Marmsoler D, Gleirscher M (2016) Specifying properties of dynamic architectures using configuration traces. In: International colloquium on theoretical aspects of computing. Springer, Berlin, pp 235–254Google Scholar
  46. 46.
    Junker U (2006) Configuration. In: Rossi F, van Beek P, Walsh T (eds) Handbook of constraint programming. Foundation of artificial intelligence, vol. 2, 1st edn. Elsevier, New York, NY, pp 837–868Google Scholar
  47. 47.
    Hotz L, Felfernig A, Stumptner M, Ryabokon A, Bagley C (2014) Configuration knowledge representation and reasoning. In: Knowledge-Based Configuration, pp 41–72Google Scholar
  48. 48.
    Williams BC, Ragno R (2007) Conflict-directed a* and its role in model-based embedded systems. Discret Appl Math 155:1562–1595 MathSciNetCrossRefGoogle Scholar
  49. 49.
    Junker U (2001) Quickxplain: conflict detection for arbitrary constraint propagation algorithms. Workshop on modelling and solving problems with constraintsGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2019

Authors and Affiliations

  • Birte Caesar
    • 1
    Email author
  • Florian Grigoleit
    • 2
  • Stephan Unverdorben
    • 3
  1. 1.Helmut-Schmidt UniversityHamburgGermany
  2. 2.Technical University MunichGarchingGermany
  3. 3.Siemens AG, Corporate TechnologyErlangenGermany

Personalised recommendations