Advertisement

Engineering with Computers

, Volume 35, Issue 1, pp 57–73 | Cite as

Automatic evaluation of plastic collapse conditions for planar frames with vertical irregularities

  • A. GrecoEmail author
  • F. Cannizzaro
  • A. Pluchino
Original Article

Abstract

The plastic load and failure modes of vertically irregular planar frames are studied by means of an original software code developed in the agent-based programming environment NetLogo with a user-friendly interface. The proposed method lies in the limit analysis framework and is based on the generation of elementary collapse mechanisms and on their linear combination aimed at minimizing the collapse load factor. The considered irregularities consist in the absence of an arbitrary column in a regular grid of the frame and require considering additional elementary mechanisms, here presented for the first time, with respect to those associated to the corresponding regular frame. A further novelty of the method is the adoption, in the linear combination of elementary mechanisms, of negative coefficients, which, as better shown in the applicative section, is fundamental to grasp the actual collapse mechanism in irregular frames. The minimization procedure is efficiently performed by means of genetic algorithms, which allow computing both the collapse load factor and the correspondent failure mode with great accuracy and in a very short computing time. Many applications have been performed considering seismic load scenarios. Finally, by means of a parametric study, some general considerations on the weakest configurations of this typology of vertically irregular frames are provided.

Keywords

Limit analysis Elementary mechanisms method Genetic algorithms NetLogo Irregular frames 

References

  1. 1.
    Mokhtar-zadeh A, Kaveh A (1999) Optimal plastic analysis and design of frames; graph-theoretical methods. Comput Struct 73:485–496CrossRefzbMATHGoogle Scholar
  2. 2.
    Kaveh A (1995) Structural mechanics: graph and matrix methods. In: Research studies press, 2nd edn, John Wiley, ExeterGoogle Scholar
  3. 3.
    Baker J, Horne MR, Heyman J (1956) The steel skeleton plastic behavior and design, vol 2. Cambridge at the University Press, CambridgeGoogle Scholar
  4. 4.
    Lyamin AV, Sloan SW (2002) Lower bound limit analysis using non-linear programming. Int J Numer Methods Eng 55(5):573–611CrossRefzbMATHGoogle Scholar
  5. 5.
    Pisano AA, Fuschi P, De Domenico D (2013) Peak loads and failure modes of steel-reinforced concrete beams: predictions by limit analysis. Eng Struct 56:477–488CrossRefGoogle Scholar
  6. 6.
    Larsen KP, Poulsen PN, Nielsen LO (2012) Limit analysis of 3D reinforced concrete beam elements. J Eng Mech 138(3):286–296CrossRefGoogle Scholar
  7. 7.
    Roca P, López-Almansa F, Miquel J, Hanganu A (2007) Limit analysis of reinforced masonry vaults. Eng Struct 29(3):431–439CrossRefGoogle Scholar
  8. 8.
    Sloan SW (1988) Lower bound limit analysis using finite elements and linear programming. Int J Numer Anal Methods Geomech 12(1):61–77CrossRefzbMATHGoogle Scholar
  9. 9.
    Lyamin AV, Sloan SW (2002) Upper bound limit analysis using linear finite elements and non-linear programming. Int J Numer Anal Methods Geomech 26(2):181–216CrossRefzbMATHGoogle Scholar
  10. 10.
    Neal BG, Symonds PS (1952) The rapid calculation of plastic collapse loads for a framed structure. In: Proceedings of the Institution of Civil Engineers London, vol 1:2, pp 58–71Google Scholar
  11. 11.
    Neal BG, Symonds PS (1951) The calculations of collapse loads for framed structures. J Inst Civ Eng 35:21–40CrossRefGoogle Scholar
  12. 12.
    Charnes A, Greenberg HJ (1951) Plastic collapse and linear programming. Bull Am Math Soc 57(6):480 (abstract)Google Scholar
  13. 13.
    Livesley RK (1977) Linear programming in structural analysis and design. In: Gallagher RH et al (eds) Optimum structural design. Wiley, New York (Chapter 6) Google Scholar
  14. 14.
    Cohn MZ, Maier G eds (1979) Engineering plasticity by mathematical programming. Pergamon Press Ltd, New YorkGoogle Scholar
  15. 15.
    Watwood VB (1979) Mechanism generation for limit analysis of frames. J Struct Div ASCE 109:1–15Google Scholar
  16. 16.
    Gorman MR (1981) Automated generation for limit analysis of frames. Proc ASCE ST7:1350–1354Google Scholar
  17. 17.
    Deeks AJ (1996) Automatic computation of plastic collapse loads for frames. Comput Struct 60:91–102CrossRefzbMATHGoogle Scholar
  18. 18.
    Krabbenhoft K, Damkilde L (2003) A general non-linear optimization algorithm for lower bound limit analysis. Int J Numer Methods Eng 56 (2):165–184CrossRefzbMATHGoogle Scholar
  19. 19.
    Zhang Y-G, Lu M-W (1995) An algorithm for plastic limit analysis. Comput Methods Appl Mech Eng 126 (3–4):333–341CrossRefGoogle Scholar
  20. 20.
    Gaudrat VF (1991) A Newton type algorithm for plastic limit analysis. Comput Methods Appl Mech Eng 88 (2):207–224CrossRefzbMATHGoogle Scholar
  21. 21.
    Wang H, Ohmori H (2013) Elasto-plastic analysis based truss optimization using Genetic Algorithm. Eng Struct 50:1–12CrossRefGoogle Scholar
  22. 22.
    Kaveh A, Jahanshahi M (2008) Plastic limit analysis of frames using ant colony systems. Comput Struct 86:(11–12), pp. 1152–1163Google Scholar
  23. 23.
    Chintanapakdee C, Chopra AK (2004) Seismic response of vertically irregular frames: response history and modal pushover analyses. J Struct Eng 130(8):1177–1185CrossRefGoogle Scholar
  24. 24.
    Mahdi T, Gharaie VS (2011) Plan irregular RC frames: comparison of pushover with nonlinear dynamic analysis. Asian J Civ Eng 12(6):679–690Google Scholar
  25. 25.
    Greco A, Cannizzaro F, Pluchino A (2017) Seismic collapse prediction of frame structures by means of genetic algorithms. Eng Struct 143:152–168.  https://doi.org/10.1016/j.engstruct.2017.03.075 (ISSN: 0141–0296) CrossRefGoogle Scholar
  26. 26.
    Goldberg DE (1989) Genetic algorithms in search, optimization and machine learning. Addison-Wesley, BostonzbMATHGoogle Scholar
  27. 27.
    Holland JH (1992) Adaptation in natural and artificial systems. MIT Press, CambridgeCrossRefGoogle Scholar
  28. 28.
    Gen M, Cheng R (2000) Genetic algorithms and engineering optimization, vol 7. John Wiley, HobokenGoogle Scholar
  29. 29.
    Man K-F, Tang K-S, Sam K (1996) Genetic algorithms: concepts and applications in engineering design. IEEE Trans Indus Electronics 43(5):519–534CrossRefGoogle Scholar
  30. 30.
    Kaveh A, Khanlari K (2003) Collapse load factor for rigid-plastic analysis of frames using a genetic algorithm. In: Topping BHV (ed) Proceedings of the seventh international conference on the application of artificial intelligence to civil and structural engineering, Paper 33. Civil-Comp Press, Stirlingshire, UK.  https://doi.org/10.4203/ccp.78.33
  31. 31.
    Kaveh A, Khanlari K (2004) Collapse load factor of planar frames using a modified genetic algorithm. Commun Numer Methods Eng 20:911–925CrossRefzbMATHGoogle Scholar
  32. 32.
    Kaveh A, Jahanshahi M (2004) Plastic analysis of planar frames using kinematic method and genetic algorithm. Asian J Civ Eng (Build Hous) 5(3–4):145–160Google Scholar
  33. 33.
    Kohama Y, Takada T, Kozawa N, Miyamura A (1997) Collapse analysis of rigid frame by genetic algorithm. In: Proceedings of OPT197. Wessex Institute of Technology, Rome, pp 456–461Google Scholar
  34. 34.
    Kaveh A, Jahanshahi M (2006) Plastic design of frames using heuristic algorithms. In: Topping BHV, Montero G, Montenegro R (eds) Proceedings of the eighth international conference on computational structures technology, Paper No 108. Civil-Comp Press, StirlingshireGoogle Scholar
  35. 35.
    Jahanshahi M, Pouraghajan M, Pouraghajan M (2013) Enhanced ACS algorithms for plastic analysis of planar frames. Comput Methods Civ Eng 4:65–82Google Scholar
  36. 36.
    Kaveh A, Jahanshahi M, Khanzadi M (2008) Plastic analysis of frames using genetic algorithm and ant colony algorithm. Asian J Civ Eng 3:9227–9246Google Scholar
  37. 37.
    Jahanshahi M, Maleki E, Ghiami A (2016) On the efficiency of artificial neural networks for plastic analysis of planar frames in comparison with genetic algorithms and ant colony systems. Neural Comput Appl.  https://doi.org/10.1007/s00521-016-2228-5 Google Scholar
  38. 38.
    Kaveh A, Ghafari MH (2015) Plastic analysis of planar frames using CBO and ECBO algorithms. Int J Optim Civ Eng 5(4):479–492Google Scholar
  39. 39.
    Rajeev S, Krishnamoorthy CS (1992) Discrete optimization of structures using genetic algorithms. J Struct Eng 118(5):1233–1250CrossRefGoogle Scholar
  40. 40.
    Hofmeyer H, Davila Delgado JM (2015) Co-evolutionary and genetic algorithm based building spatial and structural design. AI EDAM 29:351–370Google Scholar
  41. 41.
    Rafiq MY (2000) A design support tool for optimum building concept generation using a structured genetic algorithm. Int J Comput Integr Des Constr 2(2):92–102Google Scholar
  42. 42.
    Turrin M, Von Buelow P, Stouffs R (2011) Design explorations of performance driven geometry in architectural design using parametric modelling and genetic algorithms. Adv Eng Inform 25(4):656–675CrossRefGoogle Scholar
  43. 43.
    Mares C, Surace C (1996) An application of genetic algorithms to identify damage in elastic structures. J Sound Vib 195(2):195–215CrossRefGoogle Scholar
  44. 44.
    Chou J-H, Ghaboussi J (2001) Genetic algorithm in structural damage detection. Comput Struct 79(14):1335–1353CrossRefGoogle Scholar
  45. 45.
    Chiozzi A, Milani G, Tralli A (2017) Fast kinematic limit analysis of FRP-reinforced masonry vaults. I: general genetic algorithm-NURBS-based formulation. J Eng Mech 143(9):04017071-1–04017071-13CrossRefGoogle Scholar
  46. 46.
    Wilensky U (1999) NetLogo. Center for connected learning and computer-based modeling. Northwestern University, Evanston. http://ccl.northwestern.edu/netlogo. Accessed 1 Dec 2017
  47. 47.
    Mazzolani F, Piluso V (1997) Plastic design of seismic resistant steel frames. Earthq Eng Struct Dyn 26:167–191CrossRefGoogle Scholar
  48. 48.
    CSI analysis reference manual for SAP2000, 2009  Etabs Safe and CsiBridge, Computers and Structures Inc., Berkeley (ISO No. GEN062708M1 Rev.4)Google Scholar
  49. 49.
    Caliò I, Greco A, D׳Urso D (2014) Free vibrations of spatial Timoshenko arches. J Sound Vib 333(19):4543–4561CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Civil Engineering and ArchitectureUniversity of CataniaCataniaItaly
  2. 2.Department of Physics and AstronomyUniversity of CataniaCataniaItaly

Personalised recommendations