Advertisement

Engineering with Computers

, Volume 35, Issue 1, pp 21–33 | Cite as

Maximizing the first eigenfrequency of structures subjected to uniform boundary erosion through the level set method

  • Zhenhua Li
  • Tielin Shi
  • Liang Xia
  • Qi XiaEmail author
Original Article

Abstract

Erosion of structure may result in non-trivial loss of performance. For instance, erosion may make structure members break apart and results in localized vibration eigenmodes, which will make the first eigenfrequency of eroded structure become smaller. To obtain a robust design whose first eigenfrequency is not disproportionately affected by boundary erosion, we first examine a generic deterministic structural optimization problem defined in the level-set framework. Relying on the analysis of the first-order shape derivative and the optimality conditions, several important conclusions are obtained. Then, the optimization problem of maximizing the first eigenfrequency of structures subjected to uniform erosion is introduced. In each iteration of optimization, erosion is intentionally created, and a mode recognition technique is employed to identify the actual first eigenfrequency, i.e., not belonging to localized eigenmodes. The boundary of the un-eroded structure is optimized to improve the performance of the eroded structure. The shape derivative defined on the boundary of the eroded structure is mapped to the boundary of the un-eroded one by resorting to velocity extension of the level set method.

Keywords

Robust topology optimization Eroded boundary Level set Eigenfrequency maximization 

Notes

Acknowledgements

This research work is supported by the National Natural Science Foundation of China (Grant No. 51575203) and the Natural Science Foundation for Distinguished Young Scholars of Hubei province of China (Grant No. 2017CFA044).

References

  1. 1.
    Jansen M, Lazarov BS, Schevenels M, Sigmund O (2013) On the similarities between micro/nano lithography and topology optimization projection methods. Struct Multidiscip Optim 48:717–730CrossRefGoogle Scholar
  2. 2.
    Lazarov BS, Wang F, Sigmund O (2016) Length scale and manufacturability in density-based topology optimization. Arch Appl Mech 86:189–218CrossRefGoogle Scholar
  3. 3.
    Zhou M, Lazarov BS, Sigmund O (2014) Topology optimization for optical projection lithography with manufacturing uncertainties. Appl Opt 53:2720–2729CrossRefGoogle Scholar
  4. 4.
    Wang F, Lazarov BS, Sigmund O (2011) On projection methods, convergence and robust formulations in topology optimization. Struct Multidiscip Optim 43:767–784CrossRefzbMATHGoogle Scholar
  5. 5.
    Sigmund O (2009) Manufacturing tolerant topology optimization. Acta Mech Sin 25:227–239CrossRefzbMATHGoogle Scholar
  6. 6.
    Allaire G, Dapogny C (2014) A linearized approach to worst-case design in parametric and geometric shape optimization. Math Models Methods Appl Sci 24:2199–2257MathSciNetCrossRefzbMATHGoogle Scholar
  7. 7.
    Guo X, Zhang W, Zhang L (2013) Robust structural topology optimization considering boundary uncertainties. Comput Methods Appl Mech Eng 253:356–368MathSciNetCrossRefzbMATHGoogle Scholar
  8. 8.
    Jang G, van Dijk NP, van Keulen F (2012) Topology optimization of MEMS considering etching uncertainties using the level-set method. Int J Numer Meth Eng 92:571–588MathSciNetCrossRefzbMATHGoogle Scholar
  9. 9.
    Jansen M, Lombaert G, Schevenels M (2015) Robust topology optimization of structures with imperfect geometry based on geometric nonlinear analysis. Comput Methods Appl Mech Eng 285:452–467MathSciNetCrossRefzbMATHGoogle Scholar
  10. 10.
    Lazarov BS, Schevenels M, Sigmund O (2012) Topology optimization with geometric uncertainties by perturbation techniques. Int J Numer Meth Eng 90:1321–1336CrossRefzbMATHGoogle Scholar
  11. 11.
    Schevenels M, Lazarov BS, Sigmund O (2011) Robust topology optimization accounting for spatially varying manufacturing errors. Comput Methods Appl Mech Eng 200:3613–3627CrossRefzbMATHGoogle Scholar
  12. 12.
    Wang F, Jensen JS, Sigmund O (2012) High-performance slow light photonic crystal waveguides with topology optimized or circular-hole based material layouts. Photonics Nanostruct Fundam Appl 10:378–388CrossRefGoogle Scholar
  13. 13.
    Chen S, Chen W (2011) A new level-set based approach to shape and topology optimization under geometric uncertainty. Struct Multidiscip Optim 44:1–18MathSciNetCrossRefzbMATHGoogle Scholar
  14. 14.
    Lazarov BS, Schevenels M, Sigmund O (2012) Topology optimization considering material and geometric uncertainties using stochastic collocation methods. Struct Multidiscip Optim 46:597–612MathSciNetCrossRefzbMATHGoogle Scholar
  15. 15.
    Christiansen RE, Lazarov BS, Jensen JS, Sigmund O (2015) Creating geometrically robust designs for highly sensitive problems using topology optimization. Struct Multidiscip Optim 52:737–754MathSciNetCrossRefGoogle Scholar
  16. 16.
    Yoon GH (2010) Structural topology optimization for frequency response problem using model reduction schemes. Comput Methods Appl Mech Eng 199:1744–1763MathSciNetCrossRefzbMATHGoogle Scholar
  17. 17.
    Li Z, Shi T, Xia Q (2017) Eliminate localized eigenmodes in level set based topology optimization for the maximization of the first eigenfrequency of vibration. Adv Eng Softw 107:59–70CrossRefGoogle Scholar
  18. 18.
    Choi KK, Kim NH (2005) Structural sensitivity analysis and optimization 1: linear systems. Springer, New YorkGoogle Scholar
  19. 19.
    Haug E, Choi K, Komkov V (1986) Design sensitivity analysis of structural systems. Academic Press, Orlando, FLzbMATHGoogle Scholar
  20. 20.
    Sokolowski J, Zolesio J (1992) Introduction to shape optimization: shape sensitivity analysis. In springer series in computational mathematics vol 16. Springer, New YorkzbMATHGoogle Scholar
  21. 21.
    Guo X, Zhang W, Wang MY, Wei P (2011) Stress-related topology optimization via level set approach. Comput Methods Appl Mech Eng 200:3439–3452MathSciNetCrossRefzbMATHGoogle Scholar
  22. 22.
    Peng D, Merriman B, Osher S, Zhao H, Kang M (1999) A PDE-based fast local level set method. J Comput Phys 155:410–438MathSciNetCrossRefzbMATHGoogle Scholar
  23. 23.
    Osher S, Fedkiw R (2002) Level set methods and dynamic implicit surfaces. Springer, New YorkzbMATHGoogle Scholar
  24. 24.
    Nocedal J, Wright SJ (1999) Numerical optimization. Springer, New YorkCrossRefzbMATHGoogle Scholar
  25. 25.
    Osher SJ, Santosa F (2001) Level set methods for optimization problems involving geometry and constraints. J Comput Phys 171:272–288MathSciNetCrossRefzbMATHGoogle Scholar
  26. 26.
    Díaaz AR, Kikuchi N (1992) Solutions to shape and topology eigenvalue optimization problems using a homogenization method. Int J Numer Meth Eng 35:1487–1502MathSciNetCrossRefzbMATHGoogle Scholar
  27. 27.
    Tenek LH, Hagiwara I (1994) Eigen frequency maximization of plates by optimization of topology using homogenization and mathematical programming. In: JSME international journal. Ser. C, Dynamics, control, robotics, design and manufacturing, vol. 37, pp 667–677Google Scholar
  28. 28.
    Huang X, Zuo ZH, Xie YM (2010) Evolutionary topological optimization of vibrating continuum structures for natural frequencies. Comput Struct 88:357–364CrossRefGoogle Scholar
  29. 29.
    Allaire G, Jouve F (2005) A level-set method for vibration and multiple loads structural optimization. Comput Methods Appl Mech Eng 194:3269–3290MathSciNetCrossRefzbMATHGoogle Scholar
  30. 30.
    Pedersen NL (2000) Maximization of eigenvalues using topology optimization. Struct Multidiscip Optim 20:2–11CrossRefGoogle Scholar
  31. 31.
    Du J, Olhoff N (2007) Topological design of freely vibrating continuum structures for maximum values of simple and multiple eigenfrequencies and frequency gaps. Struct Multidiscip Optim 34:91–110MathSciNetCrossRefzbMATHGoogle Scholar
  32. 32.
    Xia Q, Shi T, Wang MY (2011) A level set based shape and topology optimization method for maximizing the simple or repeated first eigenvalue of structure vibration. Struct Multidiscip Optim 43:473–485MathSciNetCrossRefzbMATHGoogle Scholar
  33. 33.
    Guo X, Zhang W, Zhong W (2014) Doing topology optimization explicitly and geometrically—a new moving morphable components based framework. J Appl Mech 81:081001–081009CrossRefGoogle Scholar
  34. 34.
    Zhang W, Li D, Yuan J, Song J, Guo X (2017) A new three-dimensional topology optimization method based on moving morphable components (MMCs). Comput Mech 59:647–665MathSciNetCrossRefzbMATHGoogle Scholar
  35. 35.
    Zhang W, Chen J, Zhu X, Zhou J, Xue D, Lei X, Guo X (2017) Explicit three dimensional topology optimization via Moving Morphable Void (MMV) approach. Comput Methods Appl Mech Eng 322:590–614MathSciNetCrossRefGoogle Scholar
  36. 36.
    Allaire G, Jouve F, Toader A (2002) A level-set method for shape optimization. C R Acad Sci ParisSerie I 334:1–6MathSciNetCrossRefzbMATHGoogle Scholar
  37. 37.
    Allaire G, Jouve F, Toader A (2004) Structural optimization using sensitivity analysis and a level-set method. J Comput Phys 194:363–393MathSciNetCrossRefzbMATHGoogle Scholar
  38. 38.
    Sethian JA, Wiegmann A (2000) Structural boundary design via level set and immersed interface methods. J Comput Phys 163:489–528MathSciNetCrossRefzbMATHGoogle Scholar
  39. 39.
    Wang MY, Wang X, Guo D (2003) A level set method for structural topology optimization. Comput Methods Appl Mech Eng 192:227–246MathSciNetCrossRefzbMATHGoogle Scholar
  40. 40.
    Xia Q, Xia L, Shi T (2017) Topology optimization of thermal actuator and its support using the level set based multiple–type boundary method and sensitivity analysis based on constrained variational principle. Struct Multidisc Optim.  https://doi.org/10.1007/s00158-017-1814-1 Google Scholar
  41. 41.
    Xia Q, Shi T (2016) Optimization of structures with thin-layer functional device on its surface through a level set based multiple-type boundary method. Comput Methods Appl Mech Eng 311:56–70MathSciNetCrossRefGoogle Scholar
  42. 42.
    Xia Q, Shi T (2015) Constraints of distance from boundary to skeleton: for the control of length scale in level set based structural topology optimization. Comput Methods Appl Mech Eng 295:525–542MathSciNetCrossRefGoogle Scholar
  43. 43.
    Xia Q, Wang MY, Shi T (2013) A move limit strategy for level set based structural optimization. Eng Optim 45:1061–1072MathSciNetCrossRefGoogle Scholar
  44. 44.
    Sethian JA (1999) Level set methods and fast marching methods: evolving interfaces in computational geometry, fluid mechanics, computer vision, and materials science, 2nd edn. Cambridge monographs on applied and computational mathematics. Cambridge University Press, CambridgezbMATHGoogle Scholar
  45. 45.
    Xia Q, Shi T, Liu S, Wang MY (2012) A level set solution to the stress-based structural shape and topology optimization. Comput Struct 90:55–64CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.The State Key Laboratory of Digital Manufacturing Equipment and TechnologyHuazhong University of Science and TechnologyWuhanChina

Personalised recommendations